Availability
Showing In Stock Items. Show All 47 Items.
Summit Racing™ offers a range of diesel performance pistons in different over-sizes for your rig. These precision-manufactured parts are tough and feature skirt coatings and anodized top ring lands for long life. Order the replacement pistons recommended for your engine application.
Not Yet Reviewed
$1,039.99
—
$1,079.99
Mahle forged diesel race pistons are designed to withstand the extreme cylinder pressures of your high-boost diesel engine! Forged from strong aluminum alloy, these race pistons are machined for less weight and low compression ratios. With almost 90 years of racing heritage and technology, Mahle knows what your high performance diesel needs to keep performing! The piston skirts receive a Grafal coating to optimize performance by reducing drag, scuffing, and friction. Get a competitive edge for your diesel-powered race rig with Mahle forged diesel race pistons.
Not Yet Reviewed
$1,589.70
Diamond Pistons Race Series pistons will withstand some serious horsepower for your high performance engine. These 2618 aluminum pistons are not only significantly lighter than the factory pistons but also superior in strength. The 2618 alloy is specifically for high-horsepower, nitrous, and boosted engines making up to 2,000 hp. Diamond Pistons Race Series pistons feature: * 3D milling on piston crowns for "ready to install" finish * Inside design forging with fully machined underskirts for maximum strength * Valve pockets designed to work with most aftermarket cylinder heads * Side gas ports for better ring seal * Moly skirt coating for friction-loss and skirt-wear protection * Premium H-13 wrist pins included; chamfered for round wire locks
( 1 )
$1,279.94
Mahle forged diesel race piston and ring kits are designed to withstand the extreme cylinder pressures of your high-boost diesel engine. Forged from strong aluminum alloy, these race pistons are machined for less weight and low compression ratios; and to reduce drag, scuffing, and friction the piston skirts receive a Grafal coating to optimize performance. The kits include a set of high-quality piston rings to get you all sealed up. With almost 90 years of racing heritage and technology, Mahle knows what your high performance diesel needs to keep performing. Get a competitive edge for your diesel-powered race rig with Mahle race piston and ring kits.
Not Yet Reviewed
$1,589.70
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? DSS FX Series pistons increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy with horizontal gas porting, these pistons are a great choice for naturally aspirated, nitrous, or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power and longevity. Kit includes a DSS XP piston ring set featuring gas nitrided steel top rings, Napier second rings, and flex vent oil rings. FX Series pistons feature the patented X Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * XR Extreme duty wrist pins * Deep CNC valve reliefs * Horizontal gas porting
Not Yet Reviewed
$1,054.95
D.S.S. Competition Engine offers FX-Series forged 4032 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 4032 alloy pistons increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft-quality 4032 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 4 )
$1,574.95
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits with XR wrist pins for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include piston rings and XR wrist pins for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$1,054.95
—
$1,144.95
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$1,604.95
If you're pushing the envelope on your engine combination or need parts that will stand up to the demands of today's power levels, D.S.S. FX-Series forged 2618 alloy pistons will increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. The FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application. Key features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High-strength piston wrist pins * Deep CNC valve reliefs
( 5 )
$1,409.95
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? DSS FX Series piston and ring kits increase your horsepower potential without killing the budget. Forged and machined with your choice of premium aircraft quality 4032 or 2618 alloy, these kits are a great choice for naturally aspirated, nitrous, or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. Kit includes a DSS XP piston ring set featuring gas nitrided steel top rings, Napier second rings, and flex vent oil rings. FX Series pistons feature the patented X Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High-strength piston wrist pins * Deep CNC valve reliefs
( 5 )
$1,054.95
—
$1,604.95
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? D.S.S. FX-Series forged 4032 alloy pistons increase your horsepower potential without busting the budget. Forged and machined with premium aircraft quality 4032 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. D.S.S. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application needs. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High strength piston wrist pins * Deep CNC valve reliefs
( 9 )
$1,379.95
Mahle PowerPak piston and ring kits include forged pistons, low-drag rings, steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines and pistons.
( 22 )
$1,002.74
—
$1,253.55
Diamond Pistons Marine Series pistons are ideal for your high-demand boats. These forged aluminum pistons are significantly stronger than the factory pistons allowing your engine to handle that extra horsepower, high-rpm operation and long hours on the water. Diamond Pistons Marine Series pistons feature: * 3D milling on piston crowns for "ready to install" finish * Moly skirt coating for friction-loss and skirt-wear protection * Oversized valve pockets for "larger than stock" valve sizes * Forged 2618 or 4032 aluminum alloy (where specified) * Premium 8620 or H-13 steel wrist pins (where specified)
Not Yet Reviewed
$1,527.03
Mahle Original individual Fire-Power piston rings are engineered to withstand the punishment of today's high-powered, nitrous oxide-injected, turbocharged and supercharged race applications. PC479 compression rings will provide superior ring durability, stable radial tension, superior combustion sealing and oil control, while protecting the cylinder walls.
Not Yet Reviewed
$1,043.99
JE Pistons 350/400 small block dome top pistons are high-compression pistons that are compatible with most aftermarket 23 degree heads and are ideal for drag race and Circle Track applications. Valve reliefs will accommodate oversized valves and long-duration, tight lobe separation cams. Precision CNC ring grooves are designed for 1/16, 1/16, 3/16 rings. However, these will not fit JE Pistons Pro Topline or Brodix cylinder heads.
( 1 )
$1,024.99
You don't need a king's ransom to rule the track, thanks to ICON premium forged piston and ring kits. They deliver high-performance racing pistons crafted from high-strength, primary aluminum alloys and matching performance piston rings. The pistons feature fully machined heads and valve ports, advanced accumulator and mini groove technology, drilled pin holes, triple-wound spiral lock rings, and their proprietary diamond-finished skirts. ICON premium forged pistons can handle the pressure and abuse from the horsepower numbers that your engine produces. If you're ready to give up your kingdom to build more horsepower with a great set of pistons--think again! The ICON premium forged pistons and ring kit best suited for your application will help you reign victorious without spending a lot of cash.
( 18 )
$1,002.99
—
$1,196.99
As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. Engineered, forged, and 100 percent machined, JE Pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. JE Pistons' Big Block Open Chamber FSR GP domed pistons are their most advanced BBC pistons available. With an entirely new FSR forging to provide unmatched strength and a significant reduction in weight compared to other designs, each piston is manufactured from high-strength 2618 alloy and is compatible with all open chamber cylinder heads. Features: * 2618 aluminum that yields the high-tensile strength needed for high-demand performance applications * Hollow dome FSR forging * Lateral gas ports * 3-D under-crown milling * Includes wrist pins and wire locks
Not Yet Reviewed
$1,199.99
JE Pistons open chamber dome top gas ported pistons are the top choice for drag race applications. These pistons have vertical gas ports, backcut top and D wall second rings (.043, .043, 3.0mm), and a low-tension oil ring. Their compression height is figured using a 9.780 in. block height with zero deck clearance. They include a pin and double Spiro locks.
Not Yet Reviewed
$1,199.99
JE Pistons Big Block Chevy Blown Alcohol Series pistons are perfect for high-boost blown alcohol drag racing! These forged aluminum pistons feature precision CNC-machined ring grooves, valve reliefs for oversized valves, and compatibility with angle milled heads. They include pins, double Spiro locks, double pin oilers, and accumulator grooves. The pistons may be used with buttons (sold separately) if you prefer, in place of Spiro locks. Choose the right pistons to handle your blown setup--JE Pistons Big Block Chevy Blown Alcohol Series pistons.
Not Yet Reviewed
$1,199.99
As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications, and their performance has been proven in victory lane time and time again. JE Pistons big block inverted dome top pistons are forged using 2618 aluminum, yielding high-tensile strength needed for high-demand performance applications, and they are designed specifically for each engine and use application to provide optimized performance durability. They feature JE Pistons' proprietary Forged Side Relief (FSR) forging design to minimize friction and power loss with reduced skirt width and save additional weight with a shorter wrist pin. Their precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 in. rings (not included). JE big block inverted dome top pistons are available in different size specs, and can be ordered individually or in larger sets.
( 1 )
$1,024.99
JE Pistons big block open chamber dome top pistons are an excellent choice for drag race applications. Their compression height is figured using a 9.780 in. block height with zero deck clearance. The pistons include a pin, double Spiro locks, and double pin oilers. Their precision CNC-machined ring grooves will accept 1/16, 1/16, 3/16 rings.
( 4 )
$1,024.99
JE Pistons 302/351W big bore dome top pistons for small block Ford are available in large bore sizes to accommodate new aftermarket race blocks and most aftermarket and factory heads. Their precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings. Cleveland and TFS twisted wedge heads will require custom pistons.
Not Yet Reviewed
$1,024.99
—
$1,099.99
Mahle Motorsports offers several Pro series pistons that are designed for professional, oval, dirt, track, and drag racing. Mahle Motorsports machines the correct valve reliefs, dome profiles, and ring grooves for competition. The pins are fitted with the proper clearances and have a factory-applied phosphate and Grafal skirt coating, eliminating the expense and uncertainty of aftermarket coatings. Every piston is hand-deburred and inspected to ensure quality and performance.
( 1 )
$1,160.43
What kind of power are you packing? Mahle PowerPak Plus piston and ring kits possess the attributes that you seek for the competitive edge that you want. Built from forged aluminum, these PowerPak pistons are hand-deburred and phosphate coated and then given Mahle's proprietary Grafal anti-friction coating. The lightweight kits also include low-drag slipper skirts, CNC-machined pin bores, machined ultra-flat ring grooves, and Mahle low-drag rings. These power-packed, race-proven packages provide you with unmatched consistency and performance. What separates you from the competition? It's the fact that you've chosen the power of Mahle PowerPak Plus piston and ring kits.
( 5 )
$1,000.55
—
$1,429.71
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
