Availability
Showing In Stock Items. Show All 25 Items.
If you're looking for more horsepower and torque for your engine, Chevrolet Performance Vortec top end kits may be just the ticket! These kits are available for a variety of engines, and each kit is comprised of all the pieces and part components you need to get the job done. Order the Chevrolet Performance Vortec top end kit recommended to fit your engine model.
Not Yet Reviewed
$1,582.88
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 161 )
$1,001.50
—
$1,595.50
Give your Ford 390-428 more get-up-and-go with Trick Flow PowerPort® 175 cylinder heads. A direct bolt-on for all 1961-76 FE engines, the heads are made from top-quality A356-T61 aluminum so they're much lighter but still as strong as OE castings. Specially optimized intake runners increase airflow velocity, and Trick Flow's extraordinary CNC Street Ported treatment guarantees proper dimensional accuracy and balance between the runners. Other performance improvements of the PowerPort175® heads include bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seat machining on SerdiR equipment. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, 7 or 10 degree steel valve stem locks, and chromoly or titanium retainer options. The heads are available fully assembled or as bare castings. Sold individually.
( 9 )
$1,099.99
—
$1,524.99
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,059.50
—
$1,625.50
These Edelbrock Performer LT1 cylinder heads are designed for the 1992-97 LT1 engines. They produce approximately 24 hp more than factory-stock LT1 heads, and raise peak power levels by 500 rpm. They work with stock or aftermarket self-aligning roller rocker arms. These Edelbrock Performer LT1 aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability, plus hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 1 )
$1,087.50
Trick Flow® High Port® 225 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost superchargers or turbos, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide additional material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails. Trick Flow® High Port® 225 cylinder heads are available fully assembled or as bare castings and sold individually.
( 3 )
$1,399.99
—
$1,524.99
Ford Performance Parts 289/302/351W X2 Street Cruiser aluminum assembled cylinder heads provide an easy way to bolt-on significant horsepower to your Street Cruiser package! Manufactured using all-new Ford tooling, and constructed using 356-T6 aluminum, each cylinder head is cast, precision machined, and assembled with premium components. The X2 heads also feature high-temperature exhaust valve seats, bronze guides, common rocker bosses for strength, and increased section thickness in critical areas for porting. Sold individually, two of these X2 Street Cruiser cylinder heads are required for you to complete your engine's horsepower upgrade. Additional features include: * Intake flows approximately 230 cfm at .600 in. lift (at 28 in. of H20) * Exhaust flows approximately 160 cfm at .600 in. lift (at 28 in. of H20) * Machined for 1.94 in. intake and 1.54 in. exhaust valve diameters * Use either GT-40 or aftermarket performance intake manifolds * Must check your intake manifold for port match; not all intakes are compatible due to the tall high-flow ports * Machined for AGSP-32C gasket seat spark plugs * Each head weighs approximately 25 lbs. less than each production cast iron head * Each head is leak-tested prior to assembly * Compatible with many aftermarket intake manifolds, headers, and valve train components * Includes Ford Performance intake valves, exhaust valves, and PAC 1219X Ovate Beehive valve springs * Features 10 degree locks, steel valve spring retainers, and stock valve seals * Features wider valve cover gasket sealing rail to prevent leaks * Compatible with all Ford Performance roller camshafts and aftermarket hydraulic roller camshafts up to .600 in. lift * Compatible with bolt-down rockers 1.6-1.7 ratio; always check rocker arm clearance to valve springs with production rocker arms * Depending on lifter preload, Ford Performance rocker shim kits * Use Fel-Pro exhaust gasket (part number 1415) * Designed to be used on Ford Performance BOSS blocks; M-6010-BOSS302, M-6010-B302BB, M-6010-BOSS35195, M-6010-BOSS35192 and M-6010-BOSS351BB * Use Ford Performance M-6065-BOSS headbolt set or Ford Performance M-6014-BOSS head stud kit * Use Ford Performance head gasket M-6051-CP331 or M-6051-S331—or, for "Big Bore" application, use M-6051-R351 * Must use Ford Performance M-6065-D289 headbolt kit to install heads on 289/302 production blocks * Does not fit 1986 5.0L with flat-top pistons unless pistons are notched for valve relief
( 6 )
$1,336.99
Trick Flow High Port® 240 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost super- and turbocharges, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide more material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails.
( 3 )
$1,649.99
Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads deliver great throttle response and power from 1,500 to 6,500 rpm, and with winning results. Offering the best in quality and performance, these bare heads are cast and heat-treated in the Edelbrock Foundry and machined in their manufacturing facility. Designed with the latest computer technology, they have highly efficient ports and state-of-the-art combustion chambers shapes for improved performance throughout the rpm range with great throttle response and top-end horsepower. Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads include top-quality features, like threaded inserts in rocker stud and exhaust bolt holes for superior strength and durability, and manganese-bronze valve guides with ductile iron valve seats.
( 1 )
$1,041.50
Trick Flow GenX® 235 cathedral port cylinder heads are fully CNC-machined to significantly improve the performance of extreme street and race LSX engines. Trick Flow engineers altered the valve angles from 15° to 13.5° to decrease valve shrouding, increase mid-lift airflow, and improve rocker arm-to-valve cover clearance. Top-of-the-line CNC Competition Ported runners have a premium high resolution surface finish for maximum flow and performance. The spark plugs were relocated in the CNC-profiled combustion chambers to enhance mid-lift airflow and increase the rigidity of the casting for extreme horsepower applications. Material was added at the rocker arm mounting points to increase high-rpm valvetrain stability. Trick Flow GenX 235 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 4.8L, 5.3L, 5.7L, and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.
( 1 )
$1,549.99
Trick Flow® potent PowerPort® A460 360 cylinder heads for Ford 429/460 are ideal for use in drag racing, monster trucks, tractor pulling, and other ultra-high power, large cubic inch engine combinations. The heads have CNC Competition Ported runners with Trick Flow® top-of-the-line, premium high resolution surface finish for maximum airflow and performance in all-out naturally aspirated or forced induction applications. Other features include big block Chevrolet-style exhaust port openings and a heavy duty 18-bolt mounting pattern for superior gasket retention. Trick Flow® PowerPort A460 360 cylinder heads are available fully assembled or as bare castings and are sold individually.
( 2 )
$1,699.99
On Sale
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 40 )
$1,071.99
—
$1,494.99
S&S Cycle offers several Super Stock cylinder heads to choose from for your motorcycle. They feature premium valves and high flowing ports to supply your engine with plenty of air, as well as high performance valve springs that may allow installation of cams with up to .650 in. of lift (depending upon cylinder heads chosen). Super Stock cylinder heads are also available in different finishes. Select the ones designed for your bike.
Not Yet Reviewed
$1,428.26
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
