Availability
Rein Automotive turbocharger oil return lines are manufactured with premium OE quality hose material and designed to withstand the demands of automotive turbo cooling systems. They are devised to resist excessive heat, oil, and ozone factors that cause premature failure in turbo cooling systems. These direct replacements are complete with hardware and seals when necessary for installation to save installation time and additional costs.
Not Yet Reviewed
$108.99
Go Fast Bits offers DV Plus Diverter Valves with TMS (Turbo Management System) Advantage for a wide range of vehicles, particularly imports. GFB's DV+ solution couldn't be simpler—keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?)—but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodized billet aluminum housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum—plus either a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB's DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Order the model recommended for your vehicle. Additional notes: * Retains the factory solenoid coil for seamless integration * Replaces plastic valve parts with metal for reliability and strength on chipped engines * Exclusive "pilot-actuated" valve mechanism for rapid response at high boost
( 6 )
$166.50
ICT Billet Turbo LS timing covers dress up your engine compartment while providing the oil drain returns needed for turbo installations. They fit GM LS Series engines and feature internally welded AN oil drain fittings. These timing covers must be used only with truck or LS3 Camaro crank pulleys.
( 11 )
$120.99
—
$139.99
Manley Pro Series I-Beam Turbo Tuff connecting rods are assembled from high-quality 4340 forged steel. Every rod is fully machined to the highest standards, and the Turbo Tuff design combines the appropriate weight and rugged strength for ultimate horsepower utilization. Each rod is shot-peened after machining and individually magnafluxed. These connecting rods feature 7/16 in. ARP 2000 cap screws with 12-point heads for outstanding 200,000 psi tensile strength.
Not Yet Reviewed
$257.22
Kibblewhite has developed these high performance turbo racing valve springs for the performance enthusiast. The folks at Kibblewhite have years of experience building the finest valvetrain products, and that experience has culminated in these turbo racing valve springs. Each spring starts life as the finest quality super-clean, chrome-silicon wire that is wound to the most exacting standards. After the spring is wound, it goes through a rigidly controlled heat-treatment, stress-relief, and shot-peening process that ensures the longest-lasting and strongest springs possible. These springs are perfect for high performance motors that consistently see high revs and abuse. Upgrade to these Kibblewhite high performance turbo racing valve spring kits today to realize your performance machine's true potential.
Not Yet Reviewed
$271.50
Turbosmart oil pressure regulators provide oil pressure regulation for your ball bearing turbocharger. Oil management is an important part of ensuring the longer life of a turbo. Turbosmart OPR T40 regulators help prevent compressor or turbine stage oil leaking and smoking, as well as taking the guesswork out of oil restrictor sizing for more efficient and effective oil delivery. These patent pending units ensures the oil pressure going to the turbocharger never exceeds the maximum pressure turbocharger manufacturers specify for oil supply, regardless of engine oil pressure. The result is an oil delivery system that is more reliable and easier to setup than a standard restrictor system.
( 8 )
$115.91
—
$157.95
Are people not looking twice at your sport compact? Give them more than a little surprise by installing a set of Wiseco sport compact pistons. These pistons are forged from either 4032 or 2168 aluminum alloy and are precisely CNC-machined to their final configuration. Where appropriate, designs incorporate the strength to deal with nitrous, turbos, or blowers. Chromoly wrist pins and Spirolox retainers are included. Order the size designed for fitment on your vehicle.
Not Yet Reviewed
$124.99
—
$246.99
ICT Billet alternator brackets are made from aerospace-grade billet aluminum. They come packaged in kits that include alternator brackets, bolts, spacers, and all the necessary mounting hardware. They bolt to the face of the block and can only be used on blocks with at least two mounting holes on the front of the block.
( 283 )
$138.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 136 )
$106.99
—
$154.99
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 793 )
$117.99
—
$216.99
Wiseco powersports 4-stroke forged series piston kits include your rings, piston pin, and circlips. Wiseco has a decade of experience producing quality pistons for dirt bikes, motorcycles, ATVs, snowmobiles, and outboard marine engines. Their piston kits provide strong, lightweight pistons with optimized designs that improve engine efficiency and maximize your torque and throttle response. Plus, Wiseco powersports piston kits are produced right here in the USA. It's time to blaze your own trail with these Wiseco powersports piston kits! Order the piston kit designed to fit your application.
( 1 )
$170.99
—
$224.99
Moroso extended oil pump pickups are engineered to be "where the oil is" under the most demanding racing conditions. Designed for use with Moroso oil pans and constructed of steel, they are precision-bent and heliarc welded. A wire mesh steel screen, which is welded to the pickup box, traps debris without restricting oil flow.
( 130 )
$131.99
Canton Racing Stock Appearing/Stock Replacement Series oil pans retain all stock oil pan dimensions and capacities. They're available for a wide range of applications in a choice of finishes.
( 32 )
$275.00
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 53 )
$102.99
—
$263.99
Clearance
For some engines, the softer and more conformable nature of aluminum is preferable to the stiffer characteristics of the steel backings used for many bearings. Clevite AL-Series main bearings offer the features found in OE-type aluminum bearings, combined with the distinct advantages of proven Clevite know-how. That includes things such as carefully chosen eccentricities tailored to the application, and that means solid, reliable performance. Clevite AL-Series main bearings are a great choice for anything from OEM-style rebuilds to mild performance applications. Clevite recommends these main bearings for most engines using a cast crankshaft.
( 10 )
$107.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$101.99
—
$144.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 286 )
$107.99
—
$168.99
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$274.99
Manley Platinum Series pistons are designed to provide trouble-free installation, excellent reliability, and maximum horsepower for your application. Available in 2618 and 4032 forgings, they provide the optimum balance between strength and weight, with no grain-interrupting internal milling. The Platinum Series pistons' 2618 alloy offers maximum high-temperature strength and fatigue resistance, while the 4032 alloy is ideal for moderate-horsepower street applications. Order the style and size pistons designed for your vehicle and engine.
( 6 )
$116.37
—
$248.42
If you have an extreme machine, you need a powerful belt built for the uncommon demands of your engine. Dayco's revolutionary Xtreme torque powersports drive belts are engineered for monster machines. The combination of specially formulated neoprene with the high levels of Aramid fibers delivers white-knuckle performance for the most aggressive riders. Dayco's innovative design features deeper cogs on top and rounded cogs on the bottom for ultimate flexibility and longer belt life. Additional features include: * Faster and more consistent throttle response at high speeds * Quicker throttle response at mid-speed acceleration * Greater secondary acceleration at high rpm * Reduction in slippage during the highest levels of torque * Increased horsepower capacity * Better performance during deceleration (more responsive engine braking) * Cooler running than the leading competitors
( 3 )
$179.34
—
$196.77
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$106.99
—
$194.99
J&L Oil Separator Co.'s new oil separators are the perfect addition to your high performance machine. They're everything you're missing to filter out oil vapors that could damage your internal engine components over time. The 3 oz. tanks nearly triple their original design in size—and feature a thick billet construction that's available in a clear or stealthy black anodized finish. Their new multi-stage filtration system collects the finest of vapors and drops them into an easily removable bottom. Clean air is then able to pass through, saving components such as your intake tube and manifold runners. J&L Oil Separator Co. oil separators include the fittings you'll need to make installation a breeze. Order the model tailored for your vehicle.
( 368 )
$169.00
ATI replacement hubs are designed to fit your existing ATI harmonic balancer. They are made of steel or aluminum and have different finishes, depending on your engine's application.
( 28 )
$129.56
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$103.99
—
$171.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
