Availability
The low profile sump design of these Mr. Gasket oil pans allows increased oil capacity without restricting ground clearance. Specially designed internal trap door baffling, combined with custom oil pump pick-ups, keep oil pressure fluctuation to a minimum. These oil pans feature beautiful chrome plating or a bright orange paint finish. They're ideal for both street and racing applications.
( 6 )
$226.95
Improved Racing low-profile remote oil filter takeoff adapters swivel and are less than 2 in. thick, allowing you to plumb a remote oil filter to your engine in tight spaces, while also allowing the ports to be oriented in any direction. The internals are optimized to minimize pressure drop at high-flow rates, and passages are designed as large as possible with undercuts bring used to maximize flow area. Improved Racing low-profile remote oil filter takeoff adapters are CNC-machined 6061 T-6 billet aluminum construction with MIL-A-8625 Type II black anodized finish, and they utilize FKM Viton® O-ring seals for maximum temperature range, fluid compatibility, longevity, and reliability. Replace your factory oil filter, allowing for a remote oil filter setup and the addition of an oil cooler with Improved Racing low-profile remote oil filter takeoff adapters. They are backed by a Lifetime Warranty.
Not Yet Reviewed
$169.00
Vintage Air low-mount alternator brackets allow you to mount your alternator down low on either the driver or passenger side of small or big block Chevy engines. Designed with a built-in belt adjuster, these sturdy steel brackets provide a perfect fit and include all hardware.
( 2 )
$100.99
—
$126.99
Total Seal TS1 race Gold Power low-tension ring sets feature ductile iron conventional top rings, gapless second rings, and 3-piece Gold Power low-tension oil rings. They're made for race applications.
Not Yet Reviewed
$204.66
TS1 race low-tension ring sets from Total Seal feature ductile iron conventional top rings, gapless second rings, and 3-piece low-tension oil rings.
( 2 )
$204.66
Summit Bucks
Composed of lightweight cast aluminum, Top Street Performance LS aluminum rear sump retrofit oil pans allow for increased ground clearance. Featuring a low-profile, the oil pans are designed to fit many GM rear-wheel drive applications originally equipped with a small or big block Chevy engine and factory rear sump pan. They are meticulously engineered to mount perfectly to any wet-sump LS engine and take the stock oil filter. Order the model designed to fit your application.
( 6 )
$257.03
—
$280.00
Edelbrock Elite II Series valve covers are the next generation of the original Elite Series valve covers. The Elite II Series feature a design that is influenced by the Elite Series originally released in 1985, but with a new modern take on this classic look. The valve covers are made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Depending on application, Elite II valve covers are available in both stock and tall styles. Tall profile valve covers are 2 in. taller than stock and clear most roller rockers and valve train components, while the stock profile versions clear accessories like air-conditioning and alternator brackets.
( 178 )
$173.95
ICT Billet alternator brackets are made from aerospace-grade billet aluminum. They come packaged in kits that include alternator brackets, bolts, spacers, and all the necessary mounting hardware. They bolt to the face of the block and can only be used on blocks with at least two mounting holes on the front of the block.
( 284 )
$124.99
—
$232.99
If your rig is anything but stock, and underhood space is at a premium, then these Powermaster alternator brackets are perfect. They come in a variety of designs for nearly any alternator combination in almost any location. Their extra-tough design ensures proper belt alignment in the harshest conditions.
( 39 )
$112.99
—
$143.99
Holley Gen III Hemi alternator relocation brackets help solve the challenge with Gen III Hemi swaps when the alternator won't clearance the frame on the passenger side of the engine. These braces mount your small Holley alternator (sold separately) low and inward for extra clearance. Holley Gen III Hemi alternator relocation kits fit Gen III Hemi engines with VVT and "car style" factory accessory drive systems. More product features include: * Quality finish for corrosion resistance * Robust material construction for strength and resistance to flex * All hardware for installation
Not Yet Reviewed
$249.95
Mahle Performance piston rings evolved from their pioneering use of piston ring simulation and computer development tools to develop rings that provide "free" horsepower by successfully minimizing friction. A large selection of coordinated piston ring sets is available in a variety of sizes, designs, materials, and coatings designed to exceed your high performance requirements. The difference is evident on the dyno and on the track. Features and benefits of Mahle Performance piston rings: * 1mm and 2mm steel top rings with patented HV385 supersonic thermal-spray process applied for superior bonding, increased durability, and increased scuff resistance * 1.5mm and 1/16 in. positive-twist, ductile iron, barrel-faced, plasma-moly inlaid top rings * Sport compact ring sets ranging from 81-100mm with steel-nitrided top rings * Traditional, reverse-twist, taper-faced (RBT) cast iron second rings * Tapered Hook Groove (THG) second rings that offer superior oil control when compared to traditional RBT rings * 3-piece style oil control rings in both standard and low tension * Standard-tension expanders are sold separately for select low-tension rings where increased oil control is necessary * CP-20 design oil rings that are easier to install; chemically polished for better oil drain-back with a 20 degree ear angle to ensure side seal around the ring
( 54 )
$79.03
—
$252.43
Billet Specialties polished alternator brackets are designed to independently top or side-mount your alternator, based on your application and case size. They are also independently adjustable without the use of sloppy adjuster bars.
( 24 )
$199.95
JE Pistons Pro Seal piston rings feature barrel-faced top rings made from premium ductile iron. They also have a special high-tech, friction-reducing, plasma-moly inlay on the face that combines molybdenum, nickel, chrome, and trace elements. The results are higher temperature resistance, reduced wear, better ring sealing, and reduced flaking. The second rings are a taper-faced, reverse-torsional design with a special phosphate coating. The oil-control rings are available in your choice of either low or standard-tension types. Choose the set designed for fitment on your engine application.
( 4 )
$124.86
—
$293.99
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 38 )
$104.38
Proform stamped steel valve covers are 20 percent thicker than typical aftermarket valve covers. This greatly reduces the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. These heavy-gauge steel covers are officially licensed GM products and bear the Chevrolet logo and Bowtie Emblem, unless otherwise specified. They're available in both tall and short heights, with either a chrome or black crinkle finish. Oil-restricting baffles are offered in many valve covers, for those who want to maintain the PCV hookup; and all covers are supplied with grommets for use with an air breather and PCV valve.
( 313 )
$196.95
Edelbrock's Signature series chrome valve covers are engineered for function and styled for good looks. They're triple chrome plated for long lasting good looks and have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valves, and include rubber grommets for the breather and PCV valve holes. The covers clear most aluminum rocker arms and moderate lift cams. Some applications come in a high-profile design that's 1 1/4 in. taller than stock and clears most roller rockers and valvetrain components, and a low-profile design that clears air conditioning and alternator brackets.
( 158 )
$114.95
—
$125.95
Edelbrock Racing diecast aluminum valve covers are perfect for high performance street or all-out race engines. They are lightweight, high-strength, diecast aluminum and provide ample clearance for all popular valvetrains on most cylinder heads. Some versions are available with logos and multiple finishes.
( 32 )
$188.95
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 191 )
$184.99
PRW fabricated valve covers give your engine an edge and awesome looks. Attention vintage racers, competition junkies, and machining enthusiasts trying to save weight, PRW covers are fabricated from 6061 T-6 aluminum alloy, and have successfully endured rigorous individual pressure testing, proving that they are built to last. Their incredible ability to withstand the harsh elements of racing makes them the perfect solutions for street rod and racing applications. PRW fabricated valve covers are offered in different mounting styles, heights, finishes. They all feature thicker rails and better materials to assure long-lasting durability, and they include fasteners for a no-hassle install.
( 16 )
$239.09
—
$269.09
On Sale
Holley alternator brackets are the perfect solution to mounting your alternator when a new brackets is needed. Made from high-quality materials and available in multiple finishes Holley alternator brackets will look great under the hood of any show car. Order the model recommended for your engine application.
( 2 )
$181.95
$100.95
—
$160.95
Finish off your engine with these quality Edelbrock Classic cast aluminum valve covers. The covers are made from heavy-gauge, sand cast aluminum with a polished, black, or EnduraShine finish and have a timeless ridged design. No Edelbrock part would be complete without the vintage logo topping it off. It's no wonder that these covers have been popular since the late '50s.
( 49 )
$281.95
ICT Billet offers fuel pump mounts for a variety of applications—including LS Series and select iron block engines. Machined from aerospace-grade billet aluminum, the brackets will mount an Aeromotive mechanical fuel pump low on the passenger side of an LS engine. Each package includes engine bracket, pump bracket, and mounting hardware. Order the fuel pump mounts recommended for your year/make and engine. Additional details: * Compatible with Aeromotive belt drive 6-GPM and 12-GPM fuel pumps * Compatible with LS engine ATI dampers with front- or rear-mounted drive mandrel * Slotted adjustment belt tension * NOT compatible with hex-drive or cable-driven fuel pumps
Not Yet Reviewed
$250.99
Trend Pushrods Elite Series lifters feature through-hardened M2 tool steel for their solid, flat-top lifters designed for use with the Chrysler, Ford, GM, and Toyota engines powering much of the Circle Track world. When combined with a tool steel camshaft, these lifters allow for increased valve spring pressures and higher engine speeds. They are both sturdy and lightweight, coming in at 70 grams or less! When you're building for high-performance, go with a leader in exotic materials racing experience and order the Trend Pushrods Elite Series lifters best suited for your high-revving application. More product features include: * Hardened to 63-64 Rockwell * Heavy-duty snap ring included See product page short description and Overview section to verify the following options * DLC coating available * Oiling options include with or without oil hole in foot * Seat movement options include low movement (maximum 0.015 in.)
Not Yet Reviewed
$144.99
ICT Billet belt tensioner relocation bracket kits reposition your belt tensioners to maintain correct alignment to the belt. Ensure that your belt remains at a nearly constant tension for maximum accessory drive component life, while still preventing belt slip. When properly applied, these kits provide consistent tension and help dampen belt system vibrations. They are made from aerospace-grade billet aluminum and include a bracket, bolts, spacers, and, where noted, a pulley.
( 2 )
$232.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
