Availability
Showing In Stock Items. Show All 29 Items.
March Performance crankshaft pulleys are CNC-machined to run true. These pulleys are available in both standard and underdrive sizes. Underdrive pulleys help to increase horsepower by reducing accessory pulley rotation effort at the crankshaft.
( 239 )
$116.99
March Performance idler pulleys are manufactured from quality polished aluminum. They feature ribbed and non-ribbed designs with double bearings and are hard-coated for increased wear. March idler pulleys were designed to help prevent your belts from slipping.
( 34 )
$107.99
—
$194.99
Clearance
These Pioneer race balancers bring the advantages of bonded rubber to high-revving race and street/race applications where an SFI-approved balancer is required. Each balancer features a precision CNC-machined AUSI 1045 steel center bonded to an equally strong steel inertia ring. The advanced design makes these balancers very lightweight for all-steel products. The steel inertia ring on these models is positively protected against forward and backward movement and has the added assurance of bonded rubber to eliminate spinning. Every Pioneer race balancer features easy-to-read, computer-etched timing marks.
( 50 )
$317.99
$182.50
Since 1982, Champ Pans by JR. Manufacturing has been producing top quality oil pans at reasonable prices. For their wet sump oil pans they use either clear zinc coated, 16-gauge, cold-rolled steel or .100 in. thick aluminum to fabricate the pans, making them more durable and less likely to fatigue. Champ ensures an easy install of their oil pans, and each one is designed to deliver maximum performance for the specific application. Their large inventory of models offer most any options you need to meet your application requirements. The oil pan is an important part of your engine's oiling system. Choose yours from a family of racers—Champ Pans.
( 11 )
$235.94
March Performance 1979-93 5.0L Ford pulley kits are designed for normal street driving. They reduce accessory drag, which typically creates about 12.5 HP at the rear wheels and eliminates belt throwing. These 3-piece pulley kits are available in both aluminum and steel sets. Aluminum sets are machined from 6061-T6 billet aluminum for extra strength. They are hand-polished and then covered with a "no polishing" clear powdercoated finish. They're also given a durable hard coating on the crank pulley to prevent oil seal leaks, and on the water pump pulleys to prevent premature wear. Steel sets are made from high-carbon steel, precision-machined to run perfectly true. They are coated with iron phosphate, and then given a high-gloss black polyester powdercoating for maximum rust prevention.
( 4 )
$131.99
—
$174.99
Since 1982, Champ Pans by JR. Manufacturing has been producing top-quality oil pans at reasonable prices. For their Street/Strip wet sump oil pans, they use either clear zinc coated, 16-gauge, cold-rolled steel or .100 in. thick aluminum to fabricate the pans—making them more durable and less likely to fatigue. Champ ensures an easy install of their oil pans, and each one is designed to deliver maximum performance for the specific application. Their large inventory of models offers most any option needed to meet your application requirements. The oil pan is an important part of your engine's oiling system. Choose yours from a family of racers: Champ Pans.
( 15 )
$249.09
March Performance Late GM serpentine pulley kits reduce accessory drag, which creates about 12.5 hp at the rear wheels and eliminates belt throwing. These pulley kits are designed for normal street driving. They're available in either 2-piece steel or 3-piece aluminum kits. The aluminum sets are precision CNC-machined from 6061 T-6 billet for extra strength, long wear, and to run perfectly true. They are hand-polished and covered with a maintenance-free clear powdercoated finish. They're also hard coated and reinforced in areas of high stress and wear. The steel sets are precision CNC-machined from high-carbon billet steel, coated with iron phosphate, and then covered with a high-gloss black polyester powdercoating for maximum rust prevention.
( 6 )
$111.99
—
$241.99
March Performance 1979-93 5.0 Ford power and amp series pulley kits are designed to give superb performance, while maintaining perfect electrical charging, even at idle. They create approximately 11 HP at the rear wheels by reducing accessory drag. They're ideal for vehicles with automatic transmissions or for high amperage needs such as heavy stop-and-go driving. They come available in 3-piece steel or aluminum sets. Aluminum pulley kits are machined from 6061-T6 billet aluminum for extra strength, and are hand-polished and covered with a maintenance-free clear powdercoated finish. They have a durable hard coating on the crank pulley to prevent oil seal leaks, and on the water pump pulleys to prevent premature wear. Steel pulley kits are made from high-carbon steel precision-machined to run perfectly true, coated with iron phosphate, and then covered with a high-gloss, black polyester powdercoated finish for maximum rust prevention.
( 2 )
$196.99
March Performance 1994-95 5.0L Mustang pulley kits provide approximately 12.5 HP at 5,000 rpm and exude 13.6 ft.-lbs. of torque at 3,900 rpm. These 3-piece pulley kits are available in steel or aluminum. The steel sets are precision-machined to run perfectly true. They consist of high-carbon steel coated with iron phosphate, which is then covered with a high-gloss black polyester coating for maximum rust prevention. The aluminum sets are machined from 6061-T6 billet aluminum for extra strength. Then they are hand-polished, covered with a "no polishing" clear powdercoated finish, and hard-coated in high wear areas.
( 1 )
$199.99
Moroso dry sump oil pump pulleys are designed to give you optional ratios for your dry sump system to achieve that desired drive ratio. They are made from billet aluminum and feature a hard coat anodized finish for durability. Pulleys are available with several different tooth counts to achieve the ratio that you need.
( 7 )
$106.99
—
$128.99
Moroso louvered windage trays are designed to allow oil thrown from the rotating assembly to drain into the sump, without splashing back and creating power-robbing drag. Made from heavy-gauge steel, they are PTFE coated for quick drainage.
( 26 )
$108.99
—
$128.99
Get more horsepower with Moroso billet aluminum crankshaft pulleys. They are machined from solid billets of the highest-grade aircraft aluminum for maximum durability and feature deep, precision-machined grooves to ensure belt retention, even during extreme changes in engine rpm. When crankshaft and water pump pulleys are used together, water pump speed is reduced by approximately 30 percent. These pulleys have an anodized hard-coat for extended life.
( 1 )
$103.99
Summit Racing™ Pro LS wrist pins are the toughest on the market—powerfully built for extreme boost and nitrous. They're specifically developed for Summit Racing™ Pro LS pistons and others that use a 2.250 in. pin length for Spiralocks to clear the reluctor ring without notching. Make no mistake, during high-contact stress and impact loading applications, you'll want the confidence that Summit Racing™ Pro LS wrist pins provide! * Part number SUM-S719 is made from H-13 tool steel, an alloy with 289,000 psi tensile strength (vs. common 9310 alloy tool steel pins at 187,000 psi) * Part number SUM-S720 adds diamond-like coating (DLC) to the H-13 tool steel for increased durability, hardness and much lower friction * The DLC wrist pins (SUM-S720) provide better lubricity for use with low-silicon 2618 alloy pistons that may have pin-bore galling issues at the extremes without DLC * H-13 tempers at 1,000 degrees F and readily accepts DLC application (at 400 F) without structural changes * Rockwell hardness: 54 HRC * Increased ductility of 30,500 ksi compared to other materials * Surface-finished to an RA of less than 1 and a concentricity of .000040 in. * 0.215 in. wall-thickness—the thickest on the market for ultimate strength * Only 135 grams * I.D. honed to remove stress-risers
( 4 )
$117.99
Holley Track Series valve covers are GM licensed and provide an excellent way to add high-end appeal to your favorite Chevy engine. These lightweight, yet tough valve covers are constructed of 6061 T-5 sheet aluminum, precision TIG-welded for a proper fit. They feature laser-etched Chevrolet and Bowtie emblems. The covers are available in silver anodized or black coated finishes, along with various heights to clear most popular rocker arm combinations. All models include mounting hardware for quick and simple installation.
( 70 )
$204.95
—
$235.95
Quick Fuel fabricated valve covers are available with 1.25 in. breather openings or without the openings for use with vacuum pumps or dry sump engines. These lightweight, yet durable valve covers are constructed of 6061 T5 sheet aluminum with a 1/4 in. mounting flange, and feature a laser etched QFT logo, and are precision TIG-welded for a proper fit. These valve covers are offered in silver anodized or black coated finishes, in height dimensions to clear most popular rocker arm combinations. The mounting hardware and instructions are included to facilitate installation. Order the cover suited to fit your application needs. Fabricated valve cover features: * Available for popular small block or big block Chevy, Ford, and Mopar engines * Top-quality 100 percent TIG-welded construction from 6061 T5 aluminum * 1/4 in. thick 1-piece billet aluminum mounting flange for excellent sealing * Designed to clear most popular rocker arm combinations
( 1 )
$238.95
Reduce belt slippage and eliminate belt throwing with March Performance 1988-91 Corvette serpentine pulley kits. These 3-piece serpentine pulley kits are precision CNC-machined to fit perfectly and run true. They are designed for street performance and crafted in the USA from 6061-T6 aluminum and quality steel for extra strength and wear ability. Their superior styling with clear powder coatings will eliminate polishing and look great installed in your Corvette's engine bay. Installing March Performance 1988-91 Corvette serpentine pulley kits is easy and will help to reduce accessory drag for increased horsepower. Replace those low performance pieces with March pulley kits--your Vette will thank you.
( 1 )
$162.99
March Performance 1984-91 Corvette serpentine pulley kits eliminate belt throwing and create about 12 to 15 hp at the rear wheels by reducing accessory drag. They're available in 2 or 3-piece steel or aluminum kits with Performance Series pulleys for increased horsepower, or Power and Amp Series pulleys for high amperage needs. Aluminum pulley kits are precision CNC-machined to run perfectly true and designed for daily street driving. They are made from 6061 T-6 aluminum for extra strength and wear, and finished with a maintenance-free clear powdercoat. Steel pulley kits are precision CNC-machined from high-carbon billet steel, coated with iron phosphate, and then covered with a high-gloss black polyester powdercoat for maximum rust prevention.
Not Yet Reviewed
$132.99
—
$149.99
Circle Track cars need an array of race-specific parts in order to perform their best. Our Circle Track valve covers are made short or tall, to clear roller rockers and stud girdles. They're stamped from high-quality steel; they feature two welded-on breather stands on the driver side cover, and the other cover has the breather holes left off for oil control. These covers come in a Black Powdercoated, Gold Zinc or plain, uncoated steel finishes and are also available in kits that include two breathers and two .200 in. steel-reinforced valve cover gaskets.
( 3 )
$107.96
March Performance pulley kit replacement components are a sure fit to keep freeing up that extra horsepower! March not only offers kits, but the parts to keep them running at optimum levels. Replacement pulleys, brackets, and other components are crafted from the same billet aluminum and are available in clear and black powdercoatings to match exactly what you need. It can be a "drag" trying to find replacement parts that fit and function properly. March Performance pulley kit replacement components take the "drag" out of your pulley systems.
( 1 )
$218.99
Holley cast aluminum timing covers offer a durable upgrade to the plastic OEM timing chain covers on 1996-up Vortec small block Chevy engines. These aluminum covers feature timing indicators molded into the body and are available with a natural cast or satin black finish. A quality gasket and E-coated mounting hardware for added corrosion resistance are included. Holley cast aluminum timing cover features include: * Available for EFI (with crank sensor provisions) and carbureted applications (without crank sensor provision) * Includes over-molded FKM oil seal, virtually eliminating concerns of the seal spinning out at high temperatures, which is common with other aluminum timing covers * Accommodates both stock and aftermarket water pumps
( 45 )
$122.95
PowerBond Race performance harmonic balancers bring the advantages of bonded balancers to high-revving and high-horsepower street/race applications where an SFI-approved balancer is required. They have been tested beyond 21,000 rpm without failure, and every balancer features a precision CNC-machined AISI 1045 forged steel hub bonded to an equally strong steel inertia ring. They are very light and in most cases, they are only marginally heavier than the original cast iron balancer. The steel inertia ring on the Race Series models is positively protected against forward and backward movement. PowerBond uses our Race Series high-pressure, low-cure that features a natural rubber developed in our laboratory. Every model has easy to read computer etched timing marks and meet SFI specification 18.1.
( 98 )
$227.99
Keep your cam located with these steel thrust plate timing covers from COMP Cams. They feature a welded-in tab for use with a cam button, to help in achieving correct endplay without fabrication or modification. The covers are made from heavy-gauge steel for added strength, and topped off with a durable black powdercoated finish for long-lasting good looks. They include gaskets, a seal, and bolts for a complete installation.
( 9 )
$173.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
