Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
109 Results Found For "cap"
Showing In Stock Items. Show All 140 Items.
Not Showing Customizable Items. View Customizable Items.
ARP Main Stud Kits
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application.
( 394 )
$100.99
—
$244.99
Summit Racing™ Main Bolt Kits
Make sure your crankshaft is secured properly using a set of these Summit Racing™ main bolt kits. They include high-tensile strength bolts that deliver maximum reliability where you need it the most. The bolt kits are designed for use with stock or aftermarket main caps, and can be installed without any modifications.
( 10 )
$209.70
PRW Billet Steel Main Girdles
PRW billet steel main girdles help eliminate the block flex and cap walk that occurs as a result of stress while under extreme loads, or during nitrous oxide power bursts in high performance engines. PRW main stud girdles are manufactured from premium quality 1045 billet steel, and include high-quality PRW fasteners and hardware. Select the girdle designed for your vehicle's engine.
( 2 )
$174.59
—
$243.23
Radium Engineering Oil Filler Caps
Radium Engineering oil filler caps are anodized billet aluminum designed to fit many General Motors vehicles. These replacement caps will work on both dual and single-tooth oil fill neck types and the 7/8 in.-14 threaded port accepts 10AN ORB adapter fittings to create a custom crankcase venting setup. A 10 AN ORB plug is included to block off the internal baffle, and it can be unscrewed and removed. Underneath is a cleanable and reusable stainless steel baffle for air/oil separation.
Not Yet Reviewed
$104.45
Manley Valve Tip Wear Caps
Manley valve tip wear caps protect the tip of your valve stem in high-rpm engines. They are constructed from 4140 heat-treated alloy steel, strong enough to handle harsh racing conditions.
( 19 )
$125.91
Howards Cams Extreme Billet Main Caps
Howards Cams extreme billet main caps are precision CNC-machined from superior-quality low-carbon 1020 billet material. They come available as stock replacements (straight bolt) or with splayed outer bolt holes. The splayed caps feature 10 degree angled outer holes to positively reinforce and tie the block together. Front, rear and center caps are all available. Use all the Howards Cams caps together for the ultimate in bottom-end stress and flex management. Howards Cams main caps feature side notches for easy removal and are proudly 100 percent manufactured in the USA. Line boring is required after installation.
( 14 )
$103.99
—
$235.99
Milodon Main Stud Kits
Milodon main stud kits are required where maximum gasket loading and minimal wear and tear are exerted on the block threads. These engine studs are premium-grade, race-quality studs that are created from aircraft-quality 8740 chromoly steel right in Milodon's own plant. They are ground and thread-rolled after heat treatment to ensure the exacting tolerances that Milodon requires for all of their fasteners. This ensures strength and consistent torque readings. The tensile strength of these premium fasteners is 190,000 psi, which is more than adequate for the most demanding applications. All kits come complete with 4130 heat-treated, parallel-ground washers and high-strength nuts.
( 20 )
$101.95
—
$209.95
Milodon Main Bolt Kits
Milodon premium-grade bolts are forged from 8740 chromoly steel. They are ground and thread-rolled after heat-treatment to ensure exacting tolerances. These bolts feature a 1/2 in. hex head for greater socket clearance, a wide flange area under the head for greater load spread, and a black oxide finish.
Not Yet Reviewed
$234.95
Summit Racing™ LS Main Cap Bolt Kits
Rebuilding your GM LS engine? Replace those old main cap bolts with our Summit Racing™ LS main cap bolt kits for peace of mind. Our kit includes all 30 bolts to get the job done. They meet the same high-quality and specifications as your factory bolts.
( 16 )
$149.99
PRW Main Cap Stud Kits
PRW main cap stud kits help eliminate main cap walk and also protect the threads in your engine block. The main cap studs work with the main caps to help strengthen the foundation for your next high horsepower build. These main cap fasteners come complete with hardened parallel-ground washers and quality hex-style nuts. Add confidence in the strength of your engine build when you use these PRW main cap stud kits.
( 6 )
$151.19
—
$221.09
PRW Billet Steel Main Caps
PRW billet steel main caps raise the bar in the high performance industry. The main caps are precision-machined from high strength steel, which offers both the proper balance of strength and flexibility to allow transfer of increased shock loads to the crank and bearings. These main caps stabilize the entire crankshaft rotating assembly in your high-performance engine by eliminating annoying cap walk, and reducing main bearing bore distortion. With a combination of top-quality performance components and reasonable pricing, we know that when you receive your new PRW billet steel main caps, you will have no trouble seeing what the excitement is all about!
( 3 )
$207.03
—
$246.49
Trick Flow® Main Cap Girdles for Ford
Trick Flow® main stud girdles will strengthen Ford's factory 2-bolt main cap assemblies. Crafted from tool steel and finished with black oxide, these girdles come with main cap bolts and a provision for an oil pump pickup tube hold-down. Tie your Ford caps together for better performance with main cap girdles from Trick Flow®.
( 13 )
$218.99
Manley LocCap Wear Caps
Manley LocCap wear caps are part of the ultimate assembly--a system that locks the lash cap into place using specially machined keepers to retain their position. In competitive engines, lash caps are designed to protect the tips of the valve stems. Varying thicknesses can also adjust valve clearances or attain a required valve stem protrusion. These small but essential parts are manufactured from strong alloys and are available in various diameters, both individually and in quantity packages.
( 1 )
$148.54
Milodon Main Caps
Milodon aftermarket main bearing caps not only strengthen factory 2-bolt blocks, but they will also add a measurable degree of strength to 4-bolt blocks. They are made from precision-machined, high-strength steel, which has the proper balance of strength and flexibility to allow for the transfer of increased shock loads to the crank and bearings. The secret is in the side bolts. They are angled so that they pull from the side walls of the block and not from the flimsy main web area. They'll also load the cap against the register step, which will prevent dreaded "cap walk." They can be installed by anyone with a hand drill and a tap and they come with the necessary bolts, washers, and drill bushing to complete the installation. Milodon main cap kits are available in your choice of angled or straight bolts.
( 20 )
$119.95
PRW Main Cap Girdles
PRW main cap girdles are engineered to help eliminate the block flex and cap walk that occurs as a result of stress while under extreme loads, or during nitrous oxide power bursts in high performance engines. PRW main cap girdles are manufactured from premium-quality 1045 billet steel. These kits include high-quality PRW fasteners and hardware.
( 3 )
$230.13
Edelbrock Billet Main Caps
Edelbrock billet main caps are precision CNC-machined steel for complete accuracy. They maximize the mating surface for maximum support. These optimized billet main caps are what your LS engine needs for added strength.
Not Yet Reviewed
$130.95
Clearance
American Car Craft Fluid Cap Covers
Musclecars and trucks have always been a mastery of American technology in their overall design and engines, and yet for all of that strength and beauty, they still have the same fluid caps you get on a minivan. American Car Craft fluid cap covers give you the reliability of stock caps and the strong, impressive look of chrome caps with brushed stainless steel accents. ACC's specially crafted design on the top of each cap adds a unique look; the Velcro® attachment cookies make installation over your stock caps a breeze; and the end result is impressive. Your engine deserves to be distinct; American Car Craft fluid cap covers give you the finishing touches you've longed for all along.
Not Yet Reviewed
$242.95
$179.50
World Products Main Caps
World Products main caps are precision CNC-machined from superior-quality 1050 billet steel or ductile iron and are proudly 100 percent manufactured in the USA. The main caps are designed to provide maximum stability, strength, and balance. Front and rear caps are also available. Use these caps together for the ultimate in bottom-end stress and flex management.
Not Yet Reviewed
$112.98
Manley TensileMax Valve Wear Caps
Here's a great tip for your valves--Manley TensileMax valve wear caps. They are precision-machined from TensileMax UHSS (Ultra-High Strength Steel) and through-hardened to HRc59-61 to minimize wear due to aggressive rocker contact. The proprietary heat-treatment processes will also minimize distortion. Choose the proper valve stem diameter for your valves.
Not Yet Reviewed
$125.91
Biker's Choice Oil Tank Dipsticks with Gauge
Biker's Choice oil tank dipsticks with gauge are available in analog with a 350 degree range and in digital styles. The digital dipsticks offer LCD display with blue backlight for viewing when dark, Celsius/Fahrenheit reads, automatic off, and overheat warning functions.
Not Yet Reviewed
$153.30
Gator Fasteners Main Stud Kits
Gator Fasteners main stud kits are designed for stock to performance built engines. When building a high horsepower Cummins engine, the factory main bolts can only handle so much power. Factory bolts can stretch and unfortunately cause what's called main cap walk or loss of torque. Both these conditions can contribute to major engine issues. These heavy-duty main studs eliminate these issues and add strength to the bottom end of your engine. When it comes to reliable engine assembly, don't get caught with sub-par parts. Gator studs are what you need! Each stud has rolled threads and is constructed from 8740 steel with an added proprietary element for the ultimate in durability and high-tensile strength. Order the Gator stud kit designed for your application.
( 1 )
$224.99
—
$234.99
Dorman Oil Filter Canister Caps
Your oil filter is a key component in keeping your engine running smoothly. These Dorman oil filter canister caps are made of materials that meet or exceed your original equipment. Make sure that you keep your ride at its peak performance with Dorman oil filter canister caps.
( 2 )
$104.95
ARP Powersports Main Cap Studs
Why use ARP main cap studs for your motorcycle or UTV? They're machined from 8740 chromoly steel, heat-treated to 190,000 psi tensile strength, and precision J-form thread-rolled to create fasteners with the strongest threads available. The studs eliminate main cap walk and fretting—and offer the ability to obtain more accurate torque readings, easier engine assembly, and the proper alignment of caps. Order the set recommended for your powersports machine!
Not Yet Reviewed
$115.99
—
$183.99
Mr. Gasket Chrome Valve Cover Caps
Do you want the chrome valve cover look without the hassle, or the high price tag? If so, then these chrome valve cover caps from Mr. Gasket are just what you need. They're designed to fit right over top of your old covers, so you don't have to change gaskets. The caps have the same durable chrome finish as their covers for a long lasting shine.
( 1 )
$107.95
