Availability
Showing In Stock Items. Show All 119 Items.
Are you in need of timing components for your Pontiac V8? Allstar cast aluminum Pontiac V8 timing covers have timing marks that include a water pump backing plate and two coolant inserts. These timing chain covers are designed to fit most 1969-79 Pontiac V8 engine models, including the 350, 400, and 455.
( 25 )
$209.99
King HP-Series cam bearings are precision-machined to tight tolerances to control installed oil clearances, reducing operating bearing pressure. These cam bearings are constructed from seamless steel tubing with a thin layer of lead based babbit material to reduce microscopic deflections. The babbit is quickly cooled in the casting process to achieve a very fine grain structure, doubling tensile strength, therefore, the HP-Series offers much more fatigue strength than conventional bearings, and can withstand racing spring loads, while maintaining the excellent surface characteristics of babbit. King also offers HP-Series bearings with a fluoropolymer coating. Bearings with this coating retain engine oil on the surface, even under extreme heat and pressure—a great advantage! Plus, being a lubricant, it provides backup during start-up and in the event of momentary oil starvation. Use track-tough King HP-Series cam bearings in your engine—and experience the difference.
( 13 )
$101.99
—
$157.99
Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.
( 115 )
$102.99
—
$121.99
Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.
( 97 )
$108.99
—
$172.99
Oil is the lifeblood of your engine, so it deserves a superior reservoir--such as one of these Dorman oil pans. They are constructed of painted stamped steel or natural finish aluminum for long-lasting durability. Each replacement unit is manufactured to OEM specs, ensuring a precise fit that provides an additional layer of efficiency and convenience without any modifications. Leaks, rust, damage, or an engine rebuild are all good reasons to install a new oil pan. Nearly 200 models are available, with various configurations, capacities, and sump styles. Find the Dorman oil pan to fit your car, truck, van, or SUV--and keep the vital lubricants flowing. Oil drain plugs and drain plug gaskets are sold separately.
( 229 )
$113.99
King Engine BB-Series cam bearings are recommended for OE rebuild applications. These cam bearings are babbitt on steel, and are precision machined and then micro-finished to offer long-lasting durability. Save yourself a costly rebuild with King Engine BB-Series cam bearings—stock replacements that been proven, time and time again, to get the job done.
( 14 )
$177.99
—
$301.99
King SV-Series rod bearings provide movement with minimal power loss. Connecting rod bearings provide rotating motion of the crank pin within the connecting rod, which transmits cycling loads applied to the piston, and King SV-Series will provide this function well to handle your extreme load engines. These King SV-Series connecting rod bearings are copper-based and lead-free, offering great wear resistance, as well as load capacity.
( 3 )
$136.99
Summit Racing™ Hi-Performance Cam Bearings are designed for racing and other high-performance applications. A manufacturing process that features improved materials and optional coatings for higher fatigue resistance when running higher RPM's and valve train loads makes them an ideal upgrade component for your performance or racing engine build. Summit Racing™ Hi-Performance Cam Bearings are available individually and in sets. .
Not Yet Reviewed
$149.95
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 133 )
$101.99
—
$244.99
ACDelco GM Genuine Parts engine timing covers are OE replacements for a variety of applications. The aluminum covers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. The timing cover is an essential component designed to protect the timing belt, timing chain or cam belt of your car from road debris, grime and gravel; timing belts or chains control the rotation of the camshafts and crankshaft in the internal combustion engine. Order the cover recommended for your vehicle.
( 1 )
$116.99
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 43 )
$100.99
—
$231.99
ACDelco GM Genuine Parts camshafts are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for your Chevrolet, Buick, GMC, or Cadillac vehicle. For optimal performance, choose a replacement camshaft that you know will fit and function like the original from ACDelco GM Genuine Parts camshafts.
Not Yet Reviewed
$136.99
—
$149.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$101.99
—
$183.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 7 )
$100.99
—
$210.99
Most engine parts perform much better when the oil is kept in … and dirt is kept out. So it is with your cylinder banks. Auto Metal Direct valve covers perform an invaluable function with big and small blocks on such makes as Chrysler, Dodge, Plymouth, Chevy, and Mopar. Covers are available for restoration vehicles as far back as the late 1950s, in finishes such as chrome, natural steel, zinc, and painted. They look great and fit even better, with wire tabs and hold-down brackets as correct as the originals. Valve covers are very noticeable parts when you pop the hood at a car show—find the Auto Metal Direct set for your powerplant and keep those rocker arms rockin'.
( 7 )
$159.99
—
$209.99
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 52 )
$100.99
—
$255.99
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$227.99
—
$259.99
Ford Performance Parts high-volume oil pumps are high-quality, pressure-tested, and hand-turned to deliver more oil than stock pumps. They are offered for most popular Ford V8s. Additional information: * Most are high-volume with standard pressure * Also available for select applications requiring higher volume and pressure * May require bolt-on style pickup (not included) * Some are not recommended for use with stock-capacity oil pans due to their higher pumping capacity * Because of their larger size, some pumps will not fit stock rear sump oil pans * Where applicable, includes a steel backing plate to reduce internal leakage and cavitation erosion
( 45 )
$149.99
Save time and money on your LS engine build with a new LS nodular cast iron crankshaft from ACDelco GM Genuine Parts. These engine crankshafts are designed, engineered, and tested to rigorous standards, and are backed by General Motors and are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Most common applications are for 5.3L engine codes LMG, LMF, LH6, and LY5. These crankshafts also make a great option for any new LS engine build requiring a stock stroke, stock wet sump application, and the 58X reluctor wheel. For optimal performance, choose a crankshaft from ACDelco GM Genuine Parts that will fit and function like the original. Note: Crankshaft may require re-balancing when used in non-5.3 engines.
Not Yet Reviewed
$264.99
Clearance
ACDelco GM Genuine Parts lifter valley plates are designed, engineered, and tested to rigorous standards--and backed by General Motors. They're available in a variety of styles for vehicles from the 1990s and up. These true OE replacement parts offer a precise fit for an easier install. For optimal performance, stay with the brand your vehicle came with: GM Genuine Parts.
( 1 )
$166.99
$119.50
—
$194.99
Restore or recreate the legendary performance and sound of the muscle car era with Summit Racing™ MCR or Muscle Car Replacement camshafts. These are kits that provide the cam, lifters, and assembly lubricant in one package. Available in hydraulic or mechanical lifter designs, these cams mimic the specs of the originals—but are produced on today's CNC grinders using modern lobe technology to deliver better performance and reliability. Kits are available for a wide range of vehicles, including many Chevy small block and big block applications from the 1960s and up. Bring back the good ol' days and get that muscle car back on the road. Order the camshaft model recommended for your vehicle.
( 1 )
$234.87
—
$250.17
ACDelco GM Genuine Parts engine connecting rods are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles.
Not Yet Reviewed
$169.99
On Sale
Put your Holley pride on display with a set of attractive Vintage Series valve covers. Their die-cast aluminum construction ensures high detail, while reducing the opportunity for oil leaks and warping of the flange. Choose from among a half-dozen finishes to give your engine a clean, professional look. The vehicle-specific covers are available for every model year dating as far back as 1958.
( 33 )
$292.95
$161.95
—
$268.95
Restore or recreate the legendary performance and sound of the Muscle car era with Summit Racing™ MCR or Muscle Car Replacement camshafts. Available in hydraulic or mechanical lifter designs, these cams mimic the specs of the originals—but are produced on today's CNC grinders using modern lobe technology to give you better performance and reliability. Bring back the good old days and get that muscle car back on the road; order the camshaft model recommended for your engine application.
( 14 )
$140.99
—
$198.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
