Availability
Showing In Stock Items. Show All 553 Items.
The Pro Series cylinder head bolts from ARP are cold-forged to ensure molecular integrity. They are heat-treated prior to thread rolling and machining, and are rated at a whopping 190,000 psi. The Pro Series are also available with hex and 12-point heads. All kits come complete with hardened parallel washers for even load distribution and accurate torque readings.
( 166 )
$104.99
—
$237.99
ARP High Performance Series head bolt kits are tough. They are rated at 180,000 psi--15 percent stronger than Grade 8 fasteners. They come available with a reduced wrenching hex head or 12-point head that help eliminate the need for valvetrain removal when re-torqueing cylinder heads.
( 1026 )
$102.99
—
$262.99
Summit Racing™ LS Series retrofit trunnion kits are the answer for LS engines with higher lift camshafts and heavier-than-stock valve springs. These trunnion bushing kits are designed to maximize peace of mind by completely eliminating the needle bearings and providing maximum lubrication to the trunnion—while also providing maximum load carrying capabilities many times greater than needle bearings. Rocker arm trunnion upgrade kits include: * 16 micro polished hardened steel pivots/trunnions * 32 high performance C932 bearing bronze bushings * 32 retainer clips
( 68 )
$179.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 133 )
$101.99
—
$244.99
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 787 )
$100.99
—
$282.99
Holley Track Series valve covers are GM licensed and provide an excellent way to add high-end appeal to your favorite Chevy engine. These lightweight, yet tough valve covers are constructed of 6061 T-5 sheet aluminum, precision TIG-welded for a proper fit. They feature laser-etched Chevrolet and Bowtie emblems. The covers are available in silver anodized or black coated finishes, along with various heights to clear most popular rocker arm combinations. All models include mounting hardware for quick and simple installation.
( 69 )
$199.95
—
$230.95
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 43 )
$100.99
—
$239.99
Edelbrock Elite II Series valve covers are the next generation of the original Elite Series valve covers. The Elite II Series feature a design that is influenced by the Elite Series originally released in 1985, but with a new modern take on this classic look. The valve covers are made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Depending on application, Elite II valve covers are available in both stock and tall styles. Tall profile valve covers are 2 in. taller than stock and clear most roller rockers and valve train components, while the stock profile versions clear accessories like air-conditioning and alternator brackets.
( 177 )
$173.95
—
$238.95
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$100.99
—
$210.99
Lokar Midnight Series flexible engine dipsticks are designed to coordinate with Midnight Series flexible transmission dipsticks. Their slim design allows for the easy installation inside of headers to work with OEM and Sanderson cast exhaust manifolds. They have clearance for block-hugger headers or can be applied straight into the engine block (without a tube), depending on your application needs. All engine dipsticks feature an E-Z read aluminum or steel stick for an accurate measurement of engine oil. Order the model recommended for your vehicle year/make and engine family.
( 107 )
$113.95
—
$167.95
ARP Pro Series connecting rod bolts are precision CNC-machined to exacting specifications and designed for optimum reliability. They are heat-treated and threads are rolled to provide up to ten times more fatigue strength. This makes them far superior to standard OEM fasteners in terms of durability, and fully capable of handling the extra stress of high-combustion engines.
( 67 )
$101.99
—
$245.99
ARP Pro Series rocker arm studs are ideal for competition applications. They are made from 8470 chromoly steel and are heat-treated to 200,000 psi tensile strength. They are concentric within .005 T.I.R. thread pitch to thread pitch, which will give you more consistent rocker geometry. With an extra-large radius base, these studs are more resistant to flex and will provide a more positive seating. Pro Series rocker arm studs were designed for use with Perma-Loc adjusters (not for use with OEM-style, self-locking nuts).
( 83 )
$100.99
—
$146.99
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$101.99
—
$256.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$101.99
—
$183.99
PAC Racing 1200 Series valve springs are great as replacement parts--or for pushing above and beyond the performance of OEM engines. Select them when you're upgrading camshafts or doing engine rebuilds. The 1200 Series use a premium alloy that outperforms automotive industry standards; and PAC Racing processes the alloy to aerospace shot-peening standards to achieve superior fatigue dependability. This ensures that the springs maintain the load needed to withstand rigors of both street and mild racing applications.
( 20 )
$223.67
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$103.99
—
$269.99
Lokar Midnight Series Anchor-Tight locking flexible engine dipsticks feature a locking mechanism that prevents the expulsion of the dipstick handle under pressure. They also feature a PTFE-lined, black stainless steel braided outer housing, a flexible inner dipstick cable to measure oil levels, and a black anodized handle and fittings to match the outer cable jacket finish. Whether you're using stock exhaust manifolds or installing a set of headers, Lokar Midnight Series Anchor-Tight locking flexible engine dipsticks are guaranteed to keep your dipstick handle locked in the correct position. Order the model recommended for your vehicle year/make and engine application.
( 27 )
$163.95
Rollmaster Red Series timing sets are lightweight and stronger than any other timing sets available, due to the weight savings of billet steel and use of CNC machinery. All sets feature billet steel crank and camshaft sprockets that have been 100 percent CNC-machined for reduced wear and improved accuracy. Rollmaster Red Series timing sets come standard with a premium grade one-piece Iwis full roller chain, produced in Germany and built to the highest possible quality standards. The sets have nine keyways, allowing you more adjustments for dialing in the camshaft to your liking. Multiple keyways are a solid fixture and tend not to move or work loose like offset bushings or dowels--providing a positive locking of the cam timing to whatever position is desired.
( 13 )
$123.76
—
$232.01
Rollmaster Gold Series timing sets feature Nitride camshaft and crankshaft sprockets. They're lightweight and stronger than any other timing sets available, due to the weight savings of billet steel and use of CNC machinery. All sets have billet steel crank and camshaft sprockets which have been 100 percent CNC-machined for reduced wear and improved accuracy. Rollmaster Gold Series timing sets come standard with a premium grade one-piece Iwis full roller chain, produced in Germany and built to the highest possible quality standards. The sets have nine keyways, allowing you more adjustments for dialing in the camshaft to your liking. Multiple keyways are a solid fixture and tend not to move or work loose like offset bushings or dowels--providing a positive locking of the cam timing to whatever position is desired.
( 8 )
$140.72
—
$255.74
Give your engine the winning edge with King XP-Series coated main bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote™ nano-composite coating takes protection to the next level without adding any additional thickness! Order the replacement main bearings designed for fitment with your engine. pMaxKote™ provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 7 )
$104.99
—
$266.99
COMP Cams retrofit trunnion kits for GM LS Series engines are designed to convert stock LS Series rocker arms into captured roller trunnions for high-rpm race applications. They include rocker arm trunnions, bearings, and retaining rings for a complete installation. Keep your valvetrain reliable throughout the entire rpm range with one of these GM LS rocker arm bearing upgrade kits. Kits include: * 16 rocker arm trunnions, LS-type retrofit * 32 rocker arm bearings, LS-type retrofit * 32 rocker arm retaining rings, LS-type retrofit * 16 bolts for LS trunnion kit * 2 washers for pressing trunnions
( 105 )
$184.95
—
$222.95
On Sale
Put your Holley pride on display with a set of attractive Vintage Series valve covers. Their die-cast aluminum construction ensures high detail, while reducing the opportunity for oil leaks and warping of the flange. Choose from among a half-dozen finishes to give your engine a clean, professional look. The vehicle-specific covers are available for every model year dating as far back as 1958.
( 33 )
$292.95
$161.95
—
$268.95
Performer-Plus lifters from Edelbrock are designed to handle the torque and horsepower that the Performer-Plus camshafts produce. They are also matched perfectly by Edelbrock to provide consistent power.
( 10 )
$134.95
The ACL Race Series performance oil pumps have been meticulously engineered to meet the demanding needs of high-performance engines operating at high rpm's. These ACL Race Series oil pumps are designed with high output and high volume capabilities. Gerotor sets are precision-machined from copper alloy. Tight tolerances assure optimum pressure flow. Each Race Series performance oil pump has been individually inspected and tested to assure pressure and flow characteristics. Select the ACL Race Series performance oil pump that is better suited for your application needs.
Not Yet Reviewed
$136.99
—
$160.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
