Availability
Showing In Stock Items. Show All 80 Items.
Upgrading your camshaft? Get maximum performance with matching valve springs. Edelbrock's Sure Seat valve springs are made of the highest quality spring wire and are precision-wound to exact specifications. They are designed for use on OEM heads when used in conjunction with their Performer-Plus, Performer RPM, and Torker-Plus camshafts. They'll work with the stock rotators (if applicable) and fit the spring pockets perfectly.
( 42 )
$117.95
—
$208.95
Edelbrock Sure Seat valve spring kits are designed for small block Chevy OE cast iron heads. Made of the highest quality spring wire and precision wound to close tolerances, these springs are ideal when installing Edelbrock Performer-Plus camshafts. The valve springs are machined for use with OEM valve rotators. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application. Kits contain non-rotator valve springs, retainers, and matching 7 degree valve stem locks. They're available in single or dual options, in a variety of diameters and heights.
( 6 )
$155.95
—
$266.95
Edelbrock spring seat cup kits provide a hardened barrier between the valve springs and heads, positively locating the base of the spring to prevent unwanted spring movement.
( 4 )
$113.95
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 153 )
$102.95
—
$215.95
COMP Cams Xtreme Energy DLC hydraulic flat tappet lifters are quality yet inexpensive performance-proven lifters available in hydraulic and solid for multiple applications. These tappets feature a Diamond-Like Coating (DLC) face that forms an extremely hard, tough, and high-lubricity surface to reduce friction at the cam lobe/lifter interface, extending lifter and camshaft life significantly. The lifters maintain the excellent performance expected of a COMP product and are available for Chevrolet, Buick, Cadillac, Pontiac, Oldsmobile, Ford, Chrysler, and AMC applications requiring flat tappets. Additional details: * DLC: Diamond-Like Carbon * Wear-resistant * High lubricity * Cast-iron and steel camshaft compatible * Outstanding performance in Spintron durability testing simulation of an entire racing season * Excellent alternative to hard-to-find standard lifters
( 1 )
$108.95
Howards Cams OE-style performance hydraulic roller lifters are stock replacements for use in factory hydraulic roller blocks. These lifters offer the best combination for the street with reduced friction and increased torque and horsepower. They're available in various outside diameters for fitment on specific vehicle applications. Order them individually or as a set.
( 4 )
$249.99
Howards Cams direct lube hydraulic flat tappet lifters use a precision minor flat ground on the side of lifter body to supply oil to the cam lobe/lifter interface. This allows for a constant oil supply to the cam lobe, resulting in higher valve spring pressures, more aggressive profiles, and reduced lobe wear.
( 8 )
$284.99
COMP Cams short travel XD hydraulic roller lifters offer the advantages of both light pre-load and reduced oil volume, producing the most stable and highest-revving hydraulic lifter available. The XD versions feature heavy-duty tool steel pushrod seats. This adds strength and durability in extreme-duty applications, such as turbo drag cars and offshore powerboats. Certain engines respond better to a light lifter pre-load because it recovers more quickly from any bad harmonics in the valvetrain. Others work better with a heavy pre-load because oil volume is reduced under the plunger, which increases lifter stiffness. Now you have the best of both—with COMP Cams short travel XD hydraulic roller lifters. Order the model designed for your vehicle and engine application.
( 4 )
$179.95
—
$188.95
Valve springs compress and rebound hundreds of times a second. Make sure your next set of valve springs are built to last—and built to win! Trick Flow® by PAC Racing dual valve springs are specifically designed for cams with aggressive profiles, and are available with damper coils for extra spring surge prevention. PAC springs are CNC coiled from high tensile-strength, extra-durable Pacaloy chrome-silicon steel and double shot-peened beyond Aerospace Material Specifications (AMS) reliability standards.
( 28 )
$149.99
COMP Cams Performance Series solid lifters are specifically designed for high-end street and race applications. They feature a precision-ground crown radius and surface finish to promote performance camshaft compatibility and high-rpm durability. The lightweight design and premium one-piece pushrod seat provide an extended rpm range, and their accurately located oil band yields a consistent, properly metered oil flow.
( 23 )
$123.95
—
$217.95
Howards Cams horizontal bar mechanical roller lifters feature CNC-machined alloy bar stock bodies with case-hardened 8620 rollers. Their spring-loaded, self-lifting design for easy cam changes is what makes them so popular. The lifters are also fully rebuildable.
( 1 )
$116.99
Howards Cams performance hydraulic lifters are 100 percent Rockwell-tested. They are designed for maximum performance, while offering precision oil control. These lifters can be used as OE replacements, as well as in high performance racing applications.
( 26 )
$199.99
Howards Cams performance mechanical lifters are designed and manufactured to the closest tolerances in the performance industry. Their precision-ground crown faces ensure long life for both cam and lifters in the harsh competition environment.
( 3 )
$246.99
COMP Cams Sportsman solid roller lifters feature premium-quality, high-value components designed for sportsman and professional racing, along with high-end street machines. They're available in both needle-bearing and bushing configurations. Each design features two pressurized EDM oil feeds, as well as an edge-orifice feed to the wheel. This delivers a more reliable oil feed than most competing options. COMP Cams Sportsman solid roller lifters are also designed with a shallower oil band than competitors' versions for increased strength and rigidity, while internal machining helps to reduce weight. The body utilizes a skirted wheel that strengthens the lifter ears, and the skirt also provides more contact area with the lifter bore for further lifter stabilization. In addition, staked axles eliminate clips and provide robust axle retention. This feature increases the stiffness of the lifter ears and helps to prevent the ears from spreading. The COMP Cams Sportsman solid roller lifters are built from 8620 premium steel for increased strength and wear resistance and they feature a captured, stainless steel link bar design. The lifters also utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. Choose the size and options tailored for your engine application.
( 9 )
$154.95
—
$233.95
COMP Cams short travel hydraulic roller lifters have been engineered from a patent-pending design that specifically performs at higher engine speeds. They're designed to limit the lifter's internal piston as it is pumped up. By limiting that movement, the COMP Cams short travel hydraulic roller lifters cut down on the loss of power and limit valvetrain failure at higher rpm. The lifters are REM-finished and then black oxide coated for extreme durability, even for those high-revving engines. Choose the size, quantity, and other options tailored for your high performance application.
( 14 )
$159.95
The ultimate lifters for your severe racing applications—Howards Cams UltraMax Series steps up the performance so you can do the same. These bushed, direct-lube mechanical roller lifters are made for ultra-high spring pressures and the most aggressive cam lobes. Howards replaced the needle bearings in the roller tip with solid bushings, and they offer full-time, high-pressure oiling to the bearing axles. Together, these features deliver the highest rpm and high spring pressure capabilities available. The lifters have lightened, steel alloy bodies with a special enhanced finish, heat-treated stainless steel link bars, and case-hardened 8620 rollers. They're fully rebuildable. Go for the win with a set of Howards Cams UltraMax bushed, direct-lube mechanical roller lifters.
( 3 )
$229.99
These lifters are for use with the newly designed Hydraulic Roller Cam Series from COMP Cams—or as replacements for stock hydraulic roller lifters. You must be certain that the lifter is correct for the type of block used, because some later model blocks require special lifter designs. Order the model tailored for your engine application.
( 18 )
$144.95
—
$169.95
Simplify your valvetrain assembly! COMP Cams high performance valve spring kits have everything that you need for a complete valve spring assembly. Springs and retainers are included, along with complete instructions for a worry-free installation.
( 32 )
$145.95
—
$195.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. Summit Racing™ springs are made from high quality steel with precision winding and surface treatments. Special consideration for reduced valvespring and retainer mass ensures stability at high rpm. This reduces valve float, extends the rpm range, and greatly reduces valvetrain wear.
( 29 )
$209.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 133 )
$101.99
—
$244.99
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 272 )
$106.95
—
$277.95
BTR Beehive valve springs, with their conical shape, can deliver enhanced performance. They may also provide lower seat pressures, so your valvetrain components are less stressed. BTR springs are produced from quality materials, and their beehive design will support more RPMs than stock cylindrical springs. Valve springs are the fastest moving components in your engine. Choose BTR Beehive valve springs for better durability, higher RPM potential, and performance. They're available in a variety of size, pressure, and lift options for countless applications from 2001 and up.
( 9 )
$119.99
—
$149.99
ARP Pro Series rocker arm studs are ideal for competition applications. They are made from 8470 chromoly steel and are heat-treated to 200,000 psi tensile strength. They are concentric within .005 T.I.R. thread pitch to thread pitch, which will give you more consistent rocker geometry. With an extra-large radius base, these studs are more resistant to flex and will provide a more positive seating. Pro Series rocker arm studs were designed for use with Perma-Loc adjusters (not for use with OEM-style, self-locking nuts).
( 83 )
$100.99
—
$146.99
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 52 )
$100.99
—
$257.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
