Availability
Showing In Stock Items. Show All 699 Items.
Summit Racing™ Pro SBC 4-7 Swap hydraulic flat tappet camshafts are American made and utilize ultra-modern lobe technology. The revised firing order increases power through better mixture distribution and smoother running through equalized crankshaft journal loading. These racing cams are available in Stage 1 through Stage 8 configurations. Order the model with specs recommended for your Chevy small block engine application.
( 14 )
$199.99
No camshaft swap is complete without a new set of lifters. Treat your engine to the "good stuff" with new Trick Flow® hydraulic lifters or lash adjusters. Featuring durable hardened steel construction, these lifters and adjusters are a must when installing new cams—and are perfect replacements for worn or ticking lifters in used engines. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods. The sets are available in a variety of fitment options for applications from 1955 and up.
( 47 )
$104.99
—
$223.99
If high spring pressures or extreme operating conditions have you worried about lobe scuff and lifter wear, then these Crower Camsaver hydraulic lifters are for you. They deliver 20 to 30 percent more oil to your lobe and lifter faces for the best possible insurance against premature lobe and lifter failure. These flat tappet styles are available in a variety of outside diameters for proper fitment on specific applications.
( 63 )
$149.99
—
$179.99
ACDelco GM Genuine Parts engine valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles. For the optimal performance, replace your vehicle's parts with those made by the original manufacturer—ACDelco GM Genuine Parts.
( 1 )
$119.99
Proform high-performance gear drive sets offer high-precision timing, eliminating chain stretch. They are machined for noise, easy to install, and fit under stock timing covers.
( 38 )
$100.99
—
$129.99
For the hardest working part of your valvetrain, use Summit Racing™ cast steel roller tip rocker arms. Our chromoly steel long-slot rockers will give you a long service life and allow for less deflection and valve guide scrubbing. Each rocker features a precision-ground roller and includes a grooved, heat-treated rocker ball and nut.
( 101 )
$140.99
—
$182.99
PRW Sportsman steel roller tip rocker arms are an ideal choice for a significant cross-section of engines. Anything from a mild street rebuild to the performance demands of off-track, Circle Track, and drag racing. These 4340 chromoly steel rocker bodies feature a longer pivot slot for higher lift camshafts. They're much stronger than stamped steel, so rocker arm flex is negligible. The roller tip minimizes scrubbing from the valve stem pushing forcefully against the valve guide. This reduces friction and frees up an additional 15 to 30 hp over stock models. PRW Sportsman steel roller tip rocker arms are an excellent performance alternative to stock rockers. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * PRW RockerLocs * Rated at 350 lbs. open spring pressure * Heat-treated pivot balls
( 34 )
$150.64
—
$207.41
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$101.99
—
$252.99
These Chevrolet Performance hydraulic flat tappet camshafts feature a special lobe pattern for balanced intake and exhaust flow. Their unique profiles produce maximum low, mid, and upper rpm power. The Chevrolet Performance hydraulic flat tappet camshafts are designed for use with stock or mildly modified engines.
( 2 )
$208.99
One way to increase power is to increase lift. That's what makes COMP Cams Magnum roller tip rocker arms so popular. They're one of the highest lift rockers you can get outside of racing. And, along with the lift, you also get a ball pivot roller tip to prevent valve stem and guide wear.
( 289 )
$116.95
—
$240.95
The OE rocker arm bearing design is a proven weak link in high-performance LS engines because the bearings are unable to cope with high lift cams, higher valve spring pressures, and sustained high-RPM use. Plus, the uncaptured design allows the needle rollers to be ejected into the crankcase, potentially causing catastrophic engine damage. One way to fix these issues is with a full set of high-quality roller rocker arms. However, many builders prefer the lower cost and lightweight durability of stock rocker bodies. That's where Trick Flow's far less costly solution comes in. The Trick Flow® rocker arm trunnion upgrade kit includes 16 CNC-machined trunnions that are heat-treated and precision ground to tighter tolerances for reduced wear and significantly improved rocker arm control. Precision needle roller bearings withstand high performance cams, valve springs, and repeated high-RPM blasts. They are held captive by extra wide circlips to prevent the bearing walk-out problem of the OE design. The Trick Flow® trunnion installation kit takes all the hassle out of removing old trunnions and installing new ones, with easy installation using just a bench vise instead of a cumbersome hydraulic press like other kits. Best of all, no modification are required to the OE rocker arms to use these upgrade and installation kits! Features Include: • CNC Machined Trunnion - Heat Treated & Precision Ground • Tighter Tolerance & Radial Clearance • Captivated bearing for reliability • Designed for higher stresses and high RPM use • Improved rocker and valve control
Not Yet Reviewed
$163.99
Cam Motion lifters are available to fit your desired level of performance and budget. From economical stock replacements to their High Performance, Racing, and Premium lines of lifters, Cam Motion covers many applications. Their Premium hydraulic roller lifters feature cold-forged steel construction, precision-ground needle roller bearings and extra-long pistons, precision oil metering, and high-flow, quick-reacting check valves. Cam Motion lifters are available in factory tray/retainer-styles and tie bar-styles.
( 8 )
$159.95
—
$213.12
These factory muscle camshafts are reproduced from the factory specs and made to COMP Camps' strict tolerances. Available in several styles, these cams keep that stock fit and great sound and combine it with COMPS Cams' incredible performance.
( 16 )
$258.95
—
$287.95
For maximum increases in low-end torque, engine vacuum, and improved idle quality, Rhoads V-Max variable duration flat tappet lifters are the answer. These unique lifters are designed to significantly increase low-end torque and engine vacuum. This makes them the best choice for hot street, performance marine, and all racing applications. Typical vacuum increases range between 3 to 5 in. at idle when used with bigger cams. They are fully adjustable and require an adjustable valvetrain. Adjustment is similar to solid lifters--simply use a feeler gauge to adjust the exact amount of lift reduction you want, anywhere from .010 in. to .030 in., and that is exactly what you get at idle. Duration is reduced between 5 and 20 degrees at .050 in. lift, depending on the adjustment. As the rpm increases, so does your valve lift and duration. Complete lift and duration restoration take place at approximately 4,000 rpm. V-Max series lifters are also particularly suited for racing applications with vacuum rules. You can run more cam than your competition while still meeting vacuum requirements, giving you the performance advantage.
( 7 )
$249.99
PAC Racing 1200 Series circle track valve springs are great for providing your valve train with optimal performance. Select them when you're upgrading camshafts or doing engine rebuilds. The 1200 series use a premium alloy that outperforms automotive industry standards; and PAC Racing processes the alloy to aerospace shot-peening standards to achieve superior fatigue dependability. This ensures that the springs maintain the load needed to perform lap-after-lap.
( 3 )
$243.34
When it's time to replace or upgrade the valves in your Trick Flow® cylinder heads, don't cut corners—turn to the company that originally made them. These replacement valves are the same high quality units used in Trick Flow® assembled heads. Features include stainless steel construction, swirl polishing, hardened tips, undercut stems, and dished heads (most applications). The valves install without any modifications and are available for all Trick Flow® cylinder heads.
( 37 )
$195.99
—
$264.99
High Energy rocker arms from COMP Cams are excellent replacements for stock engine rebuilds with a stock or High Energy camshaft. They eliminate the noise and slop associated with worn or high-mileage stock rockers and match or exceed factory specifications.
( 28 )
$104.95
—
$239.95
Isky has valve springs to cover all applications. Whether you're looking for street or all-out competition in single, dual, and multi-coil designs, Isky has valve springs for you.
( 17 )
$109.99
—
$261.99
Summit Racing™ HDR premium thick-wall pushrods are a great upgrade for your engine. Factory pushrods (and even .080 wall aftermarket versions) act like a pogo stick in a running engine. Not only is static spring pressure working against them, it's also the valvetrain inertial mass increasing with RPM. This reduces power and valvetrain life. While a .080 thin-wall pushrod may not break, it doesn't mean it's the best option. Enter the HDR's. Summit™ used FEA (Finite Element Analysis) in the initial testing. We didn't just compare them to thin-wall welded-ball factory pushrods, but with aftermarket models, as well. The results speak for themselves! * The Summit™ HDR 5/16 x .105 wall pushrods have 20 percent less stress and 25 percent less deflection than a typical 5/16 x .080 chromoly pushrod * The Summit™ HDR Pro LS 11/32 x .120 wall have 25 percent less stress and 28 percent less deflection than a typical 5/16 x .080 wall chromoly pushrod * The Summit™ HDR 3/8 x .135 pushrods commonly used in big blocks has 15 percent less stress and 20 percent less deflection than a typical 3/8 x .080 wall chromoly pushrod Summit Racing™ added other high-end features like 210 degree ball ends to cope with extreme lobe lift and clear the rocker and are available in multiple lengths. * HDR 5/16 pushrods are offered in common LS, SBC, and SBF lengths * HDR Pro LS 11/32 pushrods add .030 diameter AND .120 wall thickness over a 5/16. Although most LS engines came with 5/16 pushrods, 11/32 pushrods fit any stock or aftermarket cylinder head. The added thickness adds much needed strength to any LS cam swap or engine build. Being available in .025 in. increments allows for fine tuning of hydraulic lifter preload with the LS's non-adjustable rockers. * HDR 3/8 pushrods fit the LS7 and common BB Chevy combinations. They have .135 wall thickness for maximum strength. Pushrods are some of the best horsepower-per-dollar components in your engine, so step up to the HDR's for your build!
( 55 )
$178.99
Valve springs compress and rebound hundreds of times a second. Make sure your next set of valve springs are built to last—and built to win! Trick Flow® by PAC Racing dual valve springs are specifically designed for cams with aggressive profiles, and are available with damper coils for extra spring surge prevention. PAC springs are CNC coiled from high tensile-strength, extra-durable Pacaloy chrome-silicon steel and double shot-peened beyond Aerospace Material Specifications (AMS) reliability standards.
( 28 )
$111.99
—
$275.99
PROMAXX Performance Freedom Series valve spring and retainer kits offer great performance and service. The Freedom Series allows you to choose kits that include single, dual, or triple springs with damper, steel, or titanium retainers, locks, machined spring bases, and Viton® rubber seals to bump up the power of your engine. Emancipate your engine's horsepower with Freedom Series valve spring and retainer kits from PROMAXX Performance.
( 1 )
$201.00
Replace your corroded or cracked timing cover with one of these Pioneer aluminum timing covers. All Pioneer aluminum timing covers are cast and machined to the highest factory specs for a perfect fit every time.
( 20 )
$128.99
—
$179.99
COMP G2™ Valve Springs represent months of work by their engineering team to identify dated valve spring designs and bring them up to modern-day standards. COMP G2™ valve springs are using the same materials and manufacturing technologies demanded by today's race teams and modern engine platforms. These springs are a product of innovative design and superior craftsmanship using premium materials and precision manufacturing. Engineered with state-of-the-art techniques utilizing premium wire, they redefine reliability and consistency in the performance automotive aftermarket. Featured are single and dual valve springs, available as individuals or four, six, or eight-cylinder applications.
( 2 )
$115.95
—
$302.95
Perfect for replacements or stock rebuilds, Melling stock replacement camshafts can restore your engine's true potential. They're available in a variety of styles, including hydraulic flat tappet, roller tappet, and roller follower; and mechanical flat tappet. Melling offers affordable, quality engine parts, including a full line of cams for cars, light trucks, and imports as far back as the mid-1950s. If you want quality that you can count on at a price that's hard to beat, order the Melling stock replacement camshaft designed for fitment on your vehicle.
( 18 )
$116.99
—
$267.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
