Availability
Showing In Stock Items. Show All 116 Items.
On Sale
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 151 )
$115.95
—
$215.95
$104.36
—
$194.36
On Sale
Keep your valvetrain running smooth. COMP Cams High Energy hydraulic roller lifters are for use with the newly designed hydraulic roller cam series, or as performance replacements for stock hydraulic roller lifters. You must be certain that the lifters are correct for the type of block used.
( 80 )
$220.95
—
$288.95
$198.86
—
$260.06
On Sale
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 250 )
$117.95
—
$295.95
$106.16
—
$266.36
On Sale
COMP Cams Magnum pushrods are the perfect complement to your Hot Street, bracket, oval track, or any other high performance engine. One-piece Magnum pushrods are made of C1020 high-carbon, .080 in. wall chromoly steel and are heat-treated for use with guideplates. They're an affordable way to combat higher spring pressures and the other stresses associated with high performance engines.
( 448 )
$119.95
—
$200.95
$107.96
—
$180.86
On Sale
Edelbrock rocker shaft stud kits provide better rocker shaft retention and are highly recommended for use with Edelbrock FE heads. These studs help to eliminate thread wear and the possibility of bottoming the rocker shaft bolts in the head. They are made of steel alloy and fit Edelbrock FE series cylinder heads.
( 9 )
$154.95
$139.46
On Sale
COMP Cams retrofit trunnion kits for GM LS Series engines are designed to convert stock LS Series rocker arms into captured roller trunnions for high-rpm race applications. They include rocker arm trunnions, bearings, and retaining rings for a complete installation. Keep your valvetrain reliable throughout the entire rpm range with one of these GM LS rocker arm bearing upgrade kits. Kits include: * 16 rocker arm trunnions, LS-type retrofit * 32 rocker arm bearings, LS-type retrofit * 32 rocker arm retaining rings, LS-type retrofit * 16 bolts for LS trunnion kit * 2 washers for pressing trunnions
( 105 )
$184.95
—
$222.95
$166.46
—
$200.66
On Sale
Finally, you can get high performance without a high price with COMP Cams High Energy diecast aluminum rocker arms. COMP Cams is a leader in valvetrain technology and has developed these High Energy rockers to provide a superior strength to weight ratio to withstand the hardships of your street performance and mild race engines, while adding valve lift. These diecast aluminum, larger-than-stock rocker bodies are designed to be stiffer and more durable. They feature needle-bearing fulcrums and roller tips to reduce friction and lower oil temperatures for even more horsepower potential. Maybe you're on a budget, or maybe you just appreciate getting the most for your coin; make an affordable choice without sacrificing performance--get COMP Cams High Energy diecast aluminum rocker arms.
( 215 )
$133.95
—
$249.95
$120.56
—
$224.96
On Sale
COMP Cams keyway adjustable billet timing sets are an exceptional choice for your street or race vehicle. Whether you're building, replacing, or upgrading, these sets will deliver the performance you need. The chains are available in single- and double-roller style—and are designed for fitment on a wide range of engine-specific applications. Features include: * Induction-hardened steel billet gears for durability * 9-keyway crank sprocket for 2-degree incremental adjustability, 8-degree maximum advance/retard * Pre-stretched, heat-treated single or double roller chain with heavy-duty large pin design * Includes Torrington roller thrust bearing for reduced friction
( 89 )
$134.95
—
$256.95
$121.46
—
$231.26
On Sale
COMP Cams is bringing the musclecar sound back, and it's nastier than ever! Few things grab our attention at a car show or cruise-in like a thumping, high performance idle. In fact, one of the most frequent questions from customers is, "What camshaft will give my car that mean-sounding idle?" For the performance and sound you demand, COMP Cams engineers introduce the Thumpr camshafts—a new series of hydraulic flat tappet cams. The lobe profile and grind characteristics of Thumprs use a combination of early exhaust valve opening, long exhaust duration, and a generous amount of intake and exhaust overlap—to maximize the rough-idling characteristics of the cams. They give you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in several grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range.
( 56 )
$288.95
—
$341.95
$260.06
—
$307.76
On Sale
If being able to adjust your cam timing quickly and easily is a top priority, then COMP Cams Ultimate Adjustable billet timing sets could be the answer. They have 2-piece billet steel cam sprockets, which let you change cam timing without removing the degree wheel or releasing the valvetrain load, and there's no cam bushing to break. Timing can be varied from 6 degrees retarded to 6 degrees advanced. Chains are heavy-duty, double-row types with hefty 0.250 in. rollers. A one-piece roller thrust bearing handles unwanted end loads.
( 7 )
$243.95
—
$277.95
$219.56
—
$250.16
On Sale
Edelbrock chromoly pushrods are manufactured from high-quality 4130 chromoly steel tubing that's been surface hardened for maximum durability. The rods have precision-formed swedged ends for a high-quality fit. Some pushrod sets incorporate a black oxide finish for added corrosion resistance. Order the length and diameter needed for your vehicle application.
( 36 )
$194.95
—
$311.95
$175.46
—
$280.76
On Sale
COMP Cams Xtreme Energy camshafts employ the latest cam technology to provide maximum performance. Whether your use is off-roading, towing, or street performance, there's an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers—while delivering increased engine vacuum. Hundreds of models are available for fitment on vehicles from 1955 to the present. Select the cam designed for your application.
( 333 )
$226.95
—
$341.95
$204.26
—
$307.76
On Sale
COMP Cams Magnum rocker arm and high energy pushrod kits are convenient packages that take the guess work out of choosing perfectly match performance components. If you want to experience a world of difference with your rocker arms and pushrods, then you need a set of these COMP Cams Magnum rocker arm and high energy pushrod kits.
( 84 )
$241.95
—
$278.95
$217.76
—
$251.06
On Sale
COMP Cams camshaft phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm. The engine oil is pressure fed to the phasers through passageways in the cylinder heads and cams. The engine computer's control solenoids that adjust this oil flow into and out of the phasers' control chambers, give the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap.
( 2 )
$120.95
$108.86
On Sale
These COMP Cams Pro Magnum hydraulic lifters are specifically designed to perform at higher engine speeds. When engines are equipped with a hydraulic camshaft, high rpm is limited by the improper positioning of the internal piston as the lifter inevitably "pumps up." This improper location results in broken valves, and, therefore, leads to lost power or sometimes even engine failure. These lifters offer a distinct advantage over standard high-performance hydraulic lifters, especially in race applications where a hydraulic lifter must be used.
( 38 )
$130.95
—
$158.95
$117.86
—
$143.06
On Sale
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 27 )
$125.95
—
$303.95
$113.36
—
$273.56
On Sale
Designed for hot street/strip cars, COMP Cams Magnum series cams require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic camshafts provide maximum top-end performance for your high performance car.
( 59 )
$226.95
—
$298.95
$204.26
—
$269.06
On Sale
COMP Cams Xtreme 4x4 camshafts are built to take advantage of the latest cam technology to provide maximum performance and torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 for you. By using an aggressive lobe profile, these cams provide better throttle response and more mid and top-end horsepower.
( 47 )
$226.95
—
$298.95
$204.26
—
$269.06
On Sale
COMP Cams C5-R IWIS Race timing chains are serious direct-replacement options for stock, single LS chains. These high performance chains are the same as those used in Corvette Racing C5-R engines. They feature specially coated pins that resist wear and corrosion, while increasing their integrity and strength; plus, they've been pre-stretched and heat-treated to avoid further elongating or bursting that can cause timing errors and internal engine damage. From street to hardcore track and endurance racing, these top-of-the-line COMP Cams C5-R IWIS Race timing chains upgrade your LS application with reliable performance at the highest standards.
( 1 )
$131.95
$118.76
On Sale
COMP Cams Performance Series solid lifters are specifically designed for high-end street and race applications. They feature a precision-ground crown radius and surface finish to promote performance camshaft compatibility and high-rpm durability. The lightweight design and premium one-piece pushrod seat provide an extended rpm range, and their accurately located oil band yields a consistent, properly metered oil flow.
( 23 )
$173.95
—
$299.95
$156.56
—
$269.96
On Sale
These COMP Cams belt drive replacement components are designed for use in the ultimate in cam timing systems. These components provide competition engine builders with the most accurate valvetrain replacement components available today. COMP Cams has all of the parts you'll need, from cam gear bolts to shims, washers, gears, and more.
( 10 )
$114.95
—
$202.95
$103.46
—
$182.66
On Sale
These Edelbrock universal water pump pulleys are designed to work with Edelbrock water pumps. They feature billet aluminum construction and a hard-anodized finish.
( 6 )
$153.95
$138.56
On Sale
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 322 )
$115.95
—
$278.95
$104.36
—
$251.06
On Sale
Edelbrock Performer-Link true roller timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Crank gears are machined from SAE 1144 stress-proof steel. Most Edelbrock Performer-Link true roller timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set cam timing 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. Edelbrock Performer-Link true roller timing chain sets are not for use above 6,500 rpm.
( 168 )
$117.95
—
$130.95
$106.16
—
$117.86
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
