Availability
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 164 )
$10.99
—
$23.99
Choose quality valve springs from Brodix. Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. Brodix Cylinder Heads offers a variety of valve springs to suit your needs.
( 3 )
$15.99
ACDelco GM Genuine Parts rocker arms are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles. That means the purchase of ACDelco GM Genuine Parts rocker arms will provide the correct fit and performance, delivering an easier install along with the optimal operation in your vehicle. The rocker arms are offered in different styles, ratios, and mounting options. They're available for hundreds of applications.
( 1 )
$15.99
—
$17.99
WIX has the lowdown on dirt, and their Racing oil filters are ready to trap more dirt--45 percent more! Your engine needs lots of clean oil to get you across the finish line first, and WIX has spent years of researching the effects of racing on filters, and decades of manufacturing the best, to gain true distinction in all types of racing. These oil filters feature special glass-enhanced media to catch dirt particles without restricting oil flow to your hungry powerhouse. Plus, a strong steel perforated spiral center tube keeps the flow moving and has the highest collapse strength in the industry. WIX Racing oil filters have a heavy-duty can and cover to handle the stress of racing, and some filters include anti-drainback and filter bypass valves. If you're a serious racer, these track-proven filters are your ultimate choice. Guard your engine from power-robbing dirt with WIX Racing oil filters. These filters are designed for racing use only--not for street use.
( 113 )
$10.99
—
$19.99
From the leader in performance cooling, Derale oil galley bypass plugs for Gen III and IV LS engines helps improve flow, oil pressure, and completely block dirty engine oil from bypassing the filter with a triple O-ring design. A direct replacement for the plastic OEM barbell plug, they are made from 6061 T-6 billet aluminum and black anodized. Derale plugs have three preinstalled Viton® O-rings and threaded #6-32 holes for easy installation.
( 4 )
$21.49
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$12.99
—
$21.99
ARP valve cover bolt kits are offered in a choice of chromoly steel with a black oxide finish or corrosion-proof polished stainless steel. You also have a choice between hex head and easy-access 12-point designs. The heads feature a wide base for better load distribution and sealing.
( 264 )
$10.99
—
$21.99
ARP has designed these extra heavy-duty oil pump driveshaft kits to provide you with the reliability you need. Made from heat-treated chromoly steel, they are larger in diameter than the OEM unit. This enables the ARP shafts to handle the added torque requirements of increased oil pump capacity or heavy-viscosity lubricants. Rated at 220,000 psi, ARP oil pump driveshafts are ready to do the job.
( 247 )
$15.99
—
$21.99
End your camshaft timing worries! High-quality ARP cam bolts have increased preload clamping force to ensure positive timing gear register. Their increased material strength overcomes valvetrain harmonics and stress. These cam bolts have a reduced head size that makes installation and removal easier. They are available in 170,000 psi high performance kits and 190,000 psi Pro series kits.
( 277 )
$14.99
—
$20.99
Chevrolet Performance LSX block lifter guides are designed specifically for use on Chevrolet Performance LSX blocks. These 8 in. x 4 in. x 4 in. composite lifter guides will help properly complete your build or repair so you can get back on the road. Don't take chances with arbitrary inexpensive versions—order Chevrolet Performance LSX block lifter guides.
Not Yet Reviewed
$19.84
Allstar Performance valve cover breathers are offered in shielded and non-shielded versions. These aluminum breathers can be used on valve covers with breather tubes.
( 15 )
$10.99
—
$12.99
Economical Dura-Bond standard cam bearings feature round babbit construction for low friction, outstanding conformability, and added embeddability.
( 94 )
$10.99
—
$21.99
Dayco High Performance V-belts deliver more flexibility and increased airflow around the accessory drive belt, so they run cooler and last longer than most competitive belts. Dayco was one of the first to develop raw edge sidewall construction, which facilitates controlled slippage around pulleys. This feature ensures the superior performance that drivers demand from their vehicle. The V-belts' three plies of neoprene-impregnated fabric resist heat, oil, and grease. A specially formulated treatment of the polyester cord provides the strength, stability, and reliability that's required within the standards of today's industry.
( 85 )
$10.99
—
$21.99
Durable and heavy-duty Edelbrock valve guides are made of manganese-bronze material for the ultimate in wear. They are designed to fit Edelbrock cylinder heads.
( 4 )
$17.95
—
$24.95
Are you putting new cams in your engine? These Trick Flow® roller followers will help you get the job done right and get the most out of your cams. Featuring hardened steel construction, Trick Flow® roller followers are the perfect OE-style replacements for 4.6/5.4L 2V or 4V modular engines.
( 3 )
$14.99
—
$18.99
ARP water pump pulley bolt kits will provide the reliability required in racing and high performance street applications. These premium-grade, 170,000 psi pulley bolts securely attach the pulley to the water pump on your engine. Washers are included.
( 41 )
$13.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 287 )
$10.99
—
$23.99
Treat your Brodix heads to a set of new valve guides. Their replacement valve guides are made from premium materials, like phosphorous bronze, manganese, soft steel, nickel, and more in a large selection of diameters and lengths. Complete the valve guide work for your cylinder heads with replacements from Brodix.
( 1 )
$12.99
—
$21.99
No camshaft swap is complete without a new set of lifters. Treat your engine to the "good stuff" with new Trick Flow® hydraulic lifters or lash adjusters. Featuring durable hardened steel construction, these lifters and adjusters are a must when installing new cams—and are perfect replacements for worn or ticking lifters in used engines. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods. The sets are available in a variety of fitment options for applications from 1955 and up.
( 47 )
$11.99
—
$16.99
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 26 )
$14.99
—
$21.99
Securing your timing cover is easier than ever with ARP timing cover bolt kits. You can choose between polished stainless steel and chromoly black oxide finishes. They are available in your choice of standard hex or compact 12-point style heads, and washers are included.
( 221 )
$11.99
—
$19.99
Mopar Performance valve springs are made from stronger steel than OEM and are intended for general performance use. They're available for many applications in single and dual versions. And make a great choice for your muscle car.
( 4 )
$13.99
—
$17.99
These Dart adjustable pushrod guideplates are designed to give you the extra flexibility in alignment that you need for cylinder heads with different spacing. They are manufactured from durable steel and install easily with no modifications.
( 18 )
$10.18
Mopar oil filters are ready for high performance. They are engineered to meet the demands of your heavy-duty and high-power applications. The the best performance of your vehicle choose genuine Mopar Performance oil filters.
( 5 )
$11.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
