Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
96 Results Found For "rod"
Showing In Stock Items. Show All 122 Items.
Clevite H-Series Rod Bearings
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 168 )
$11.99
—
$19.99
King SI-Series Rod Bearings
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 97 )
$10.99
—
$19.99
Melling Performance PRO-Line Pushrods
Melling Performance PRO-Line pushrods give you the reliability that you need from your valvetrain. They are manufactured from high-quality carbon steel, are hardened for use with guideplates, and exceed OEM specifications. Their pushrods also feature close-tolerance wall thickness and a centerless ground to make sure that they are a matched set. Choose Melling Performance PRO-Line pushrods to keep your valvetrain operating efficiently.
( 12 )
$10.99
—
$18.99
Clevite P-Series Rod Bearings
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 289 )
$10.99
—
$19.99
Melling Pushrods
Melling OEM replacement pushrods are perfect for stock rebuild or mild performance applications where open spring pressures do not exceed 300 lbs. They're manufactured from steel tubing and work well with factory or aftermarket rocker arms. These units are available in a wide range of lengths and other options for fitment on countless makes and models. When you're replacing your valvetrain components, trust Melling pushrods to keep your engine running smoothly.
( 78 )
$10.99
—
$16.99
Sealed Power CP-Series Rod Bearings
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 118 )
$10.99
—
$16.99
Trend Pushrods
Trend Performance is an industry standard in high performance valvetrain technology and a leader in pushrod manufacturing. Manufactured in house, Trend pushrods are one-piece, centerless-ground 4130 chrome molybdenum pieces available with range of wall thicknesses, tube diameters, and lengths. They are pre-formed and centerless ground. Trend's stocking pushrods are designed for use in oval track race cars, drag race cars, hot rods, sport compacts, and marine applications. They are manufactured with 5/16 in. ball/ball ends and are available in lengths of 6.00 in. to 11.55 in. in increments of .025 in. The ball ends are machined to a tolerance of plus or minus .001 in. and the pushrods are laser-etched with the part number and specifications on a black oxide finish.
( 5 )
$10.99
—
$19.50
Chevrolet Performance Connecting Rod Bolts
What better way to secure your connecting rods than with genuine Chevrolet Performance bolts? Your rods are an important connection in your rotating assembly--making the fasteners that hold them together even more important. Choose the strength of Chevrolet Performance connecting rod bolts.
( 3 )
$14.99
ARP High Performance Series Connecting Rod Bolt Kits
ARP High Performance Series connecting rod bolts are made from seamless and defect-free 8740 chromoly steel. All ARP rod bolts are heat-treated before grinding and thread rolling and have a large underhead radius for greater strength. Guaranteed to pass magnetic inspection testing, these bolts are nearly five times stronger than OEM bolts. They're used in applications ranging from stock replacement to Circle Track, marine, and drag racing engines.
( 260 )
$11.99
—
$17.99
Eagle ARP Connecting Rod Bolts
Eagle Specialties has teamed up with ARP to offer these quality connecting rod bolts. They're available in a variety of sizes and lengths to suit your needs.
( 26 )
$11.99
—
$19.99
COMP Cams Hi-Tech Pushrods
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 325 )
$12.95
—
$19.95
COMP Cams Magnum Pushrods
COMP Cams Magnum pushrods are the perfect complement to your Hot Street, bracket, oval track, or any other high performance engine. One-piece Magnum pushrods are made of C1020 high-carbon, .080 in. wall chromoly steel and are heat-treated for use with guideplates. They're an affordable way to combat higher spring pressures and the other stresses associated with high performance engines.
( 458 )
$15.95
—
$19.95
Clevite Coated H-Series Rod Bearings
Clevite coated H-Series rod bearings were developed primarily for NASCAR racing, but are also well suited to other types of competition engines. They're especially good for engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. They also have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. The Clevite coated H-Series rod bearings are available with various under-sizes, including 0.001 in. of clearance for polished journals.
( 10 )
$11.99
—
$14.99
Manley Chromoly Swedged End Pushrods
Manley chromoly swedged end pushrods are the perfect solution for your performance engine needs. They feature meticulously formed ends with exact radii for precise fitment, excellent concentricity, and closely controlled length. The pushrods also are heat treated and feature a black oxide finish. When you want the best look no further than Manley chromoly swedged end pushrods.
( 157 )
$10.15
—
$19.19
Chevrolet Performance Pushrods
Chevrolet Performance offers a complete line of heavy-duty pushrods for most GM engines. They're designed to deliver in high performance street and competition applications. Made of high-quality materials, these pushrods are available in a variety of sizes and style options to suit your needs.
( 3 )
$12.99
—
$15.99
Mopar Replacement Pushrods
Mopar Replacement pushrods are genuine OE-replacements. That means your Chrysler, Dodge, Jeep, or Ram will receive the perfect part to repair and/or restore your vehicle's performance and safety, just as it should be.
Not Yet Reviewed
$14.99
Clevite V-Series Rod Bearings
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$12.99
—
$17.99
COMP Cams Straight Tube Pushrods
COMP Cams straight tube pushrods feature an extra-thick .125 in. wall and an ultra-rigid large 7/16 in. diameter design that prevents the damaging valvetrain vibrations that occur when smaller diameter pushrods snap back into position. These straight tube pushrods are offered in a variety of lengths and are precision-made with high-strength materials for consistency and accurate geometry. Selecting the correct pushrods is critical for proper valvetrain operation. You can count on COMP Cams for the quality components you need to keep your engine running right!
( 4 )
$17.95
—
$19.95
Manley Replacement Connecting Rod Bolts
Big-time clamping force for your connecting rods! Manley replacement connecting rod bolts feature a .0005 to .0070 in. interference fit to guarantee rod cap alignment and actually strengthen the connecting rod. They are available in ARP2000 alloy with an 8740 chromoly steel. Nuts and lubricant are included.
( 5 )
$13.99
—
$14.49
ARP Pro Series Connecting Rod Bolts
ARP Pro Series connecting rod bolts are precision CNC-machined to exacting specifications and designed for optimum reliability. They are heat-treated and threads are rolled to provide up to ten times more fatigue strength. This makes them far superior to standard OEM fasteners in terms of durability, and fully capable of handling the extra stress of high-combustion engines.
( 70 )
$16.99
COMP Cams High Energy Pushrods
COMP Cams High Energy pushrods are your best choice when building an engine for your street rod, RV, or everyday driver. COMP Cams High Energy pushrods are manufactured to meet or exceed all original equipment specifications for pushrods. They will mate perfectly with High Energy or Magnum rockers.
( 244 )
$10.95
—
$17.95
COMP Cams Hi-Tech 210 Degree Pushrods
These COMP Cams Hi-Tech 210 degree pushrods were specifically designed for high-lift applications where pushrod and seat interference are problems at maximum lift. They're heat-treated to a minimum hardness of 60 on the Rockwell C scale, for the ultimate in strength. COMP Cams even gives them a black oxide finish and imprints the length and part number on them. In addition, they feature a 210 degree radius, rather than the standard 180 degree radius, so they'll work great with rocker arms that feature cup-type adjusters and applications requiring more load-bearing surface from the pushrod. If you are building a high-horsepower, high-rpm, high-lift camshaft engine, then you need to use these COMP Cams Hi-Tech 210 degree pushrods for maximum reliability.
( 7 )
$18.95
King AM-Series Rod Bearings
King AM-Series rod bearings are recommended for street or marine applications. They have superior embeddability, which provides greater macro-particle and reduces scratching of the crank journals and tearing or weakening of the Babbitt overlays. The direct replacements feature tolerance control up to +/- .0001—and they're lead-free, making them environmentally friendly and user-safe. Order the King AM-Series rod bearings in the application designed for proper fitment with your vehicle.
( 29 )
$10.99
—
$19.99
Clevite AL-Series Rod Bearings
More and more manufacturers have shifted to aluminum bearings in their OE engines and Clevite AL-Series rod bearings are designed to be the highest-quality replacement bearings in the industry. They carry on the tradition and reputation that Clevite has built throughout the course of time. AL Series engine bearings feature a 100 percent lead-free aluminum silicon bi-metal material, which includes 60 percent more silicon than the leading competitor's bi-metal material for better conditioning of journal surfaces. These bi-metal bearings also offer greater wear resistance than the leading competitor's bi-metal material, as well as greater seizure resistance. Clevite AL-Series bearings feature 100 percent bored inside diameters for precision and surface characteristics and, where appropriate, straight-shell main bearings utilizing an "umbrella" groove that allows for superior oil control and improved pressure.
( 29 )
$11.99
—
$16.99
