Availability
Low Range Off-Road alternator conversion brackets allow you to upgrade to one of several common, larger alternators. They are laser-cut from plate steel and hand MIG-welded to perfection. Low Range Off-Road alternator conversion brackets are engineered for perfect alignment of the alternator belt, and include bracket mounting hardware. Looking to run bigger lights, a winch, or even just a better stereo system? Swap out your tiny stock alternator for more power, and mount it securely with LROR alternator brackets.
( 2 )
$15.18
JE Pistons Series 51 wrist pins are specifically developed for use with their pistons. These pins are designed to further reduce reciprocating weight and are super-finished on both the outside and inside to help minimize piston pin bore wear and fatigue cracking. JE Pistons philosophy of supplying the finest products at competitive prices has never been more evident than in their line of wrist pins. Order the JE wrist pin designed to fit your application.
( 8 )
$17.99
Wiseco offers a variety of piston wrist pins designed to handle normal wear and tear on your aftermarket engine during high-contact stress and impact loading applications for those of you running nitrous. Made from different grades of quality steel and finished to support the specific use needed, Wiseco piston wrist pins are available in a variety of diameters, thicknesses, and lengths to best suit your needs.
( 8 )
$15.99
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$13.99
—
$23.99
Economical Dura-Bond standard cam bearings feature round babbit construction for low friction, outstanding conformability, and added embeddability.
( 95 )
$10.99
—
$21.99
In the market for high performance breathers for your high performance needs? Well, listen up, direct from Edelbrock, these circle track breathers have a chrome plated top for lasting shine and are stamped with the Edelbrock name--so they are ideal for high-rpm, high-performance applications. The oiled-cotton, gauze and screen elements have very low restriction--and they're washable! These washable breathers are available in a choice of push-on or clamp-on styles to suit your needs.
( 13 )
$20.95
Mopar Replacement engine oil filters are engineered for specific vehicles to provide a precise, factory-style fit. They're manufactured from quality materials that offer high flow and low restriction. Protect the integrity and efficiency of your vehicle by changing your oil filter according to your maintenance schedule. Genuine OEM Mopar engine oil filters are designed for dependable performance to keep your Mopar ride running its best.
( 10 )
$10.50
—
$21.99
On Sale
The lifeblood of your vehicle is lubricant—which is why Mr. Gasket engine oil dipsticks and tubes are so important. They're small, inexpensive parts that tell you if your oil supply is dangerously low. And besides the function they fulfill, these accessories look great under the hood. Made from steel or billet aluminum, the dipsticks are available in a black, polished, or chrome plated finish. Find the OE-style kit that's built to fit your specific engine application.
( 84 )
$31.48
$12.97
—
$21.55
Royal Purple Extended Life oil filters offer high performance filtration for your oil system! Designed for superior particle removal and low flow restriction, these filters meet or exceed OE requirements and will not affect your car's warranty. Features include: * Thick shell material provides extra security against punctures from road debris * 100 percent screen-backed synthetic media provides superior filtration, while keeping restriction low * Ultra-strength filter housing endures a higher burst strength than conventional filters * High performance silicone anti-drainback valve prevents dry starts, even in extreme conditions * Extra-heavy duty rubber base gasket ensures a leak-free seal * Metal end caps provide a positive seal for filter element assembly * Center tube prevents filter element collapse * Bypass valve ensures oil flow in situations of excessive filter element flow restriction
( 90 )
$18.99
Summit Racing™ LS rocker arms are high-quality rocker arms that have a pedestal mount, roller fulcrum style, and are made of high-quality ductile iron construction to ensure long-lasting durability and performance. They are moly coated for wear resistance and smoother low friction operation. So, if you're looking for a quality set of rocker arms for your LS motor, Summit Racing™ has the rocker arms for you!
( 2 )
$17.99
JE Pistons Pro Seal piston rings feature barrel-faced top rings made from premium ductile iron. They also have a special high-tech, friction-reducing, plasma-moly inlay on the face that combines molybdenum, nickel, chrome, and trace elements. The results are higher temperature resistance, reduced wear, better ring sealing, and reduced flaking. The second rings are a taper-faced, reverse-torsional design with a special phosphate coating. The oil-control rings are available in your choice of either low or standard-tension types. Choose the set designed for fitment on your engine application.
( 4 )
$19.66
—
$21.89
Continental Conti VX fractional horsepower V-belts run smoother, quieter, last longer, and substantially improve energy efficiency compared to non-cogged belts. This means that you no longer have to accept the lower energy efficiency associated with envelope belts on fractional horsepower light-duty drives. Advanced V-belt technology has resulted in the development of a cut-edge, molded cog construction which exceeds the performance of conventional envelope design. The cogged design of Conti VX FHP V-belts (standard on 4L and 5L sizes) provides a greater surface area for heat dissipation and allows increased air flow around the belt during operation. These factors help to reduce internal belt temperatures and greatly improve belt life—even in tropical climates. The cogged design also improves flexibility, especially where minimum or substandard sheave diameters are involved. Don't settle for anything less than the precision engineered Continental Conti VX fractional horsepower V-belts designed to provide perfect fit, form, and function for your application. Product features, items, and specifications include: * Molded cog construction exceeds conventional envelope belts in every performance category except oil resistance, as confirmed in extensive testing * Low cross section vibration in rubber-edged, cogged belts reduces noise generation for improved performance in noise-sensitive equipment and overall indoor environments * Dust-proof and moderately oil-resistant * Heat, ozone, and abrasion resistant * Working (outside) temperature range of -30 degrees C (-22 degrees F) to 140 degrees C (284 degrees F)
Not Yet Reviewed
$10.99
—
$22.99
Howards Cams' Pro-Alloy is a specially developed low-stress, high-endurance material. Years of development, experience, and testing have gone into creating these Pro-Alloy mechanical roller valve springs. They have a low fatigue rate compared to most other roller springs on the market. These springs exceed H-11 Vasco-Jet specifications and are cycle-tested to 12 million cycles with no breakage.
( 1 )
$19.99
—
$20.99
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$12.99
—
$21.99
Clevite coated H-Series rod bearings were developed primarily for NASCAR racing, but are also well suited to other types of competition engines. They're especially good for engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. They also have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. The Clevite coated H-Series rod bearings are available with various under-sizes, including 0.001 in. of clearance for polished journals.
( 10 )
$11.99
—
$20.99
ICT Billet engine block drill templates are made from aerospace-grade billet aluminum. To use, you simply attach the template with your factory hardware, mark the hole, and then drill the hole using an "R" drill bit and an M10-1.5 tap. Got an LS truck block that needs the second mounting hole for low-mount alternators or other accessories? ICT Billet makes it simple with their easy-to-use templates.
( 2 )
$18.99
COMP Cams's XD-A pushrods offer a game-changing method for accurately setting lash or pre-load while using non-adjustable-style rockers. These patent-pending pushrods incorporate a top section that slides 2 in. inside a wider bottom section, with one or two shims captured in-between. Proven to 9,000-plus rpm in solid roller LS applications, the system provides a 90 percent increase in bending stiffness for enhanced valvetrain stability. It also allows for lightening of a rocker arm system by 30-plus grams on the backside by removing the adjuster and required support area for threads and seating. The use of lighter rockers with XD-A adjustable pushrods allow higher rpm to be achieved by creating a much more dynamically stable valvetrain system. COMP Cam XD-A pushrods are designed especially for engines with low-mass rocker arms and a light valvetrain with drop-in fitment in LS engines. They can be adjusted over a range of .172 in. in .004 in. increments with shims. Choose the pushrods with the adjustment range needed for your setup.
Not Yet Reviewed
$24.95
Dorman PCV valves are designed to match the fit and function of the original valve on specified vehicles and are engineered for durability and reliable performance. These direct replacement parts are made to help fully restore PCV valve functionality after the original equipment has failed. The PCV valves are made from quality materials, and offer a low-cost, time-saving repair solution to ensure reliable performance and long service life.
Not Yet Reviewed
$16.99
Sierra Marine drain taps are designed and manufactured for low-pressure applications. Made to the highest quality standards, they provide a leak-proof, metal-to-metal seal with hand tightening.
( 2 )
$16.99
Continental ContiTech fractional horsepower V-belts are tasked with powering light machinery, home appliances, shop equipment, fan blowers, and more. They will perform each job quietly, with smoother, longer lasting, and substantially improved energy-efficient operation. The Continental ContiTech line of FHP belts includes a complete selection of sizes and types for all fractional horsepower motors. Features and construction of these FHP V-belts: * Cooler running for longer life * Low-vibration for minimal noise * Superior efficiency for improved performance * High-tensile Vytacord improves dimensional stability * Engineered rubber compound for maximum flex-life * Molded cogs improve flexibility and heat dissipation * Backing is oil, ozone, and abrasion-resistant
Not Yet Reviewed
$11.99
Mahle is the world's largest manufacturer of piston rings. Their tremendous research and development and extensive OE connections mean that Mahle Original standard piston ring sets have the technological edge. Things like narrow compression rings, steel compression rings for gasoline engines, low-tension oil rings, and coated compression rings for diesels all came from OE. Mahle's entire Original line proves time and again that it should be the ring of choice under every hood - regardless of the application. Mahle Original standard piston rings offer high tensile strength, high yield strength, and excellent hardness with low ring mass. These factors lead to stress resistance, minimal groove pound-out, long service life, cylinder conformability, oil economy, and good blow-by control with low friction. Whether you're repairing a modern computer-controlled engine, or rebuilding an older engine, be sure to specify Mahle Original standard piston ring sets (formerly Perfect Circle) … trusted by professional automotive technicians for over 100 years.
( 11 )
$11.99
—
$19.99
Dura-Bond 70000 Series valve seat inserts feature sintered, high-speed (tungsten carbide) tool steel construction. Special additives blended into the matrix impart high-temperature lubrication properties which makes the material impervious to extreme heat and machining, enabling it to be used in "dry" fuel applications such as propane (LPG) and natural gas. Dura-Bond 70000 Series valve seat inserts are more than adequate to withstand the demands of modern engines that put a higher level of thermal and mechanical stress on valve seat inserts. The patented materials and processes offer excellent machinability, along with low wear and high heat resistance. For the heavy- or extreme-duty use Dura-Bond recommends their 70000 Series valve inserts and are used in engines using diesel, unleaded gasoline, and propane.
Not Yet Reviewed
$10.99
—
$13.99
Dura-Bond 90000 Series valve seat inserts feature sintered, high-speed (tungsten carbide) tool steel construction. Special additives blended into the matrix impart high-temperature lubrication properties which makes the material impervious to extreme heat and machining, enabling it to be used in "dry" fuel applications such as propane (LPG) and natural gas. Dura-Bond 90000 Series valve seat inserts are more than adequate to withstand the demands of modern engines that put a higher level of thermal and mechanical stress on valve seat inserts. The patented materials and processes offer excellent machinability, along with low wear and high heat resistance. For the heavy- or extreme-duty use Dura-Bond recommends their 90000 Series valve inserts and are used in engines using diesel, unleaded gasoline, and propane.
Not Yet Reviewed
$13.99
NTK engine variable valve timing solenoids are manufactured to meet the demands of today's VVT engines at both low and high rpms. The solenoids are individually tested to ensure consistent quality, with end of production tested in oil to ensure the valve is primed to work properly upon installation. Order the model recommended to fit your vehicle. Additional VVT solenoid features: * Manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage * High-strength thermoplastic for resistant to temperature, moisture and chemicals * Precision-wound, copper-coated windings help increase solenoid longevity * Hard-coated anodized spool valve prevents corrosion for lasting service
Not Yet Reviewed
$20.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
