Availability
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$13.99
—
$23.99
Get smooth valvetrain performance! Chevrolet Performance LS rocker arms install easily on your LS cylinder heads without any modifications. Add some additional horsepower and increase your rpm capability with a set of Chevrolet Performance LS rocker arms.
( 3 )
$18.99
—
$19.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 286 )
$10.99
—
$24.99
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$12.99
—
$21.99
Summit Bucks
An engine running on dirty oil won't last. Keep it clean with an ACDelco Gold oil filter. They help trap particles up to 25 microns, or one-third the width of a human hair, thereby improving the quality, performance, and lifespan of your engine. ACDelco makes oil filters to fit 99 percent of all cars, light trucks, and sport utility vehicles on the road today. Order the model designed for your engine application. Additional features include: * Excellent filter capacity, enhanced efficiency, consistent flow management, and high durability * Tight seals to prevent unfiltered oil from entering your engine * Consistent, dependable oil filtration throughout the filters
( 177 )
$10.99
—
$20.99
Whether you're putting together a rowdy stroker motor or are applying additional pressure via forced induction, BTR Platinum valve springs are up to the task of controlling your valvetrain. They are available in styles, diameters, and spring rates to suit several applications, as well as in sets or individually.
( 2 )
$17.99
These COMP Cams Hi-Tech 210 degree pushrods were specifically designed for high-lift applications where pushrod and seat interference are problems at maximum lift. They're heat-treated to a minimum hardness of 60 on the Rockwell C scale, for the ultimate in strength. COMP Cams even gives them a black oxide finish and imprints the length and part number on them. In addition, they feature a 210 degree radius, rather than the standard 180 degree radius, so they'll work great with rocker arms that feature cup-type adjusters and applications requiring more load-bearing surface from the pushrod. If you are building a high-horsepower, high-rpm, high-lift camshaft engine, then you need to use these COMP Cams Hi-Tech 210 degree pushrods for maximum reliability.
( 7 )
$18.95
—
$23.95
These Chevrolet Performance oil filler caps are a simple and attractive addition to your valve covers. These caps are offered in push-in and twist-on styles and feature a GM or Chevy Bowtie emblem.
( 12 )
$12.99
—
$20.70
Summit Racing™ split lock bolt kits put a new twist on the theory of mechanical locking fasteners. These innovative bolts use a locking set pin built into the bolt itself—and when tightened, the set pin expands the bolt threads against the thread wall. This, in turn, provides a locking system without having to use any additional wires, locking compounds, or lock washers. To remove the split lock bolts, simply loosen the set pin and back out the fastener. They are available in a variety of thread sizes, for engine applications from the 1950s and up.
( 35 )
$26.99
Additional "free" horsepower can be found by the installation of Milodon crankshaft scrapers. They'll remove any excess oil left on the crank and rods that the windage tray doesn't remove. The scrapers require fitting to individual crank and rod profiles, as well as to engine stroke. The wipers should be fitted to within .045 in. from rods and .035 in. from crank counterweights. When installed, the scrapers are sandwiched between pan rail and block.
( 2 )
$18.95
HardDrive offers Performance heavy-duty oil filters for a wide range of Harley-Davidson motorcycles from the 1980s and up, including Touring, FLT, Softail, and Sportster models. Order the replacement filter recommended for your bike. Product details: * Media enhancement by M-Pleating, increases dust holding capacity (DHC) and reduces pressure drop * The zigzag pleating pattern provides more filtration area, allowing more DHC * Additional filtration area gives the oil more room to flow, resulting in lower pressure drop * The media is resin-impregnated to ensure structural integrity during its operation under pressure and temperature spikes * Forming tapped thread for easy installation and spin-on * Pre-lubricated gasket * The gasket is lubed from the factory to aid installation * The base plate is covered with shrink film to ensure that the lube stays there until the time of usage and dust protection * Heat-resistant Anti-Drainback valve (ADBV) * Unlike standard nitrile rubber, silicone rubber has a higher heat resistance * The enhanced ADBV will prevent dry starts and provides durability throughout the extended life of the filter * 17mm hex nut * Easy for service and removal after prolonged usage * The nut is designed for safety wire attachment if needed * 16 weld spots for higher nut fatigue strength * 30+ percent gauge thickness for higher burst strength * Oval inlet hole for even lower flow resistance
Not Yet Reviewed
$11.66
—
$17.06
Clearance
Rein Automotive engine oil filter housing caps fit European vehicles the way the original manufacturer intended. Designed to match or exceed the OE materials, they are available as direct-fit replacements for the specified vehicles. If your filter housing cap is difficult to remove or reinstall due to wear, select a new one from Rein for your vehicle. Additional features: * Prevents moisture and debris from entering and contaminating the system * Manufactured to strict engineering standards/specifications in materials and tolerances * Produced by an original equipment supplier.
Not Yet Reviewed
$19.99
$13.50
—
$20.99
Clearance
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$42.99
$19.50
Fram premium Defense oil filters offer outstanding filtration and engine protection. They're designed to operate with all synthetic, conventional, and blended motor oils. The pleated synthetic-blend filtration media shields your engine from contaminants, while ensuring a consistent flow of oil. The heavy-duty spin-on cannisters are exceptionally durable. Order the model recommended for your vehicle. Additional details: * Designed to allow high flow rates and a consistent flow of oil to your engine * Fast and easy Wrench-Off removal using the welded one-inch hex nut (some models) * High capacity to withstand the service intervals recommended by vehicle manufacturers * Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
( 3 )
$10.99
—
$18.99
These Fram High Mileage oil filters feature an industry-exclusive, patented time-released gel additive that conditions oil through the entire oil change cycle. The gel additives balance oil PH and maintain viscosity. The filters use cellulose and synthetic glass-blended media to provide three times more engine protection than the leading economy oil filters, while maintaining 95 percent dirt-trapping efficiency. Ideal for older engines that are more susceptible to oil breakdown, Fram High Mileage oil filters will keep your oil at its proper viscosity until your next oil change.
Not Yet Reviewed
$16.99
—
$18.31
If you've been searching for a more economical alternative to titanium retainers to solve a wear problem or because of "class rules," Manley H-13 tool steel retainers are your solution. These are serious retainers for serious engine builders who demand nothing less than the very best! The H-13 tool steel retainers allow for better processing than other tool steels typically utilized, thus yielding a stronger and more durable product. They're up to 33 percent lighter than standard 10 steel retainers and are only 2 to 4 grams heavier than titanium versions. In addition, the H-13 tool steel retainers are heat-treated to provide the hardness of Rc56.
( 1 )
$14.28
On Sale
Genuine Holley Quality Parts offer Holley tensioner spacer kits for your R4 accessory tensioners. Spacer and hardware are included to provide additional support and clearance.
Not Yet Reviewed
$27.69
$15.23
Continental Accu-Drive idler pulleys deliver OE form, fit, and function for optimum performance and durability. They are application-specific and follow original equipment material requirements. Additional hardware is provided when required, avoiding the need to hunt down replacements for stripped bolts or missing washers. Continental idler pulleys come ready to install without any extra fabrication or machining. Thermoplastic pulleys features include: * Available for smooth and grooved applications * Glass-reinforced thermoplastic provides ideal dimensional control and running surface durability * Service-free, sealed ball bearings * Molded-in bearing for optimum fit and long service life * Precise dimensional tolerances for smooth operation. Steel pulleys features include: * Precision steel stamping * Close tolerance ball bearing pocket * Electro-deposited coating for superior corrosion resistance * Crowned running surface aids proper belt tracking
Not Yet Reviewed
$15.99
—
$20.99
PRW Sportsman steel roller tip rocker arms are an ideal choice for a significant cross-section of engines. Anything from a mild street rebuild to the performance demands of off-track, Circle Track, and drag racing. These 4340 chromoly steel rocker bodies feature a longer pivot slot for higher lift camshafts. They're much stronger than stamped steel, so rocker arm flex is negligible. The roller tip minimizes scrubbing from the valve stem pushing forcefully against the valve guide. This reduces friction and frees up an additional 15 to 30 hp over stock models. PRW Sportsman steel roller tip rocker arms are an excellent performance alternative to stock rockers. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * PRW RockerLocs * Rated at 350 lbs. open spring pressure * Heat-treated pivot balls
( 33 )
$12.31
Customize your Harley® with one of these HardDrive oil dipsticks and filler caps. These push-in accessories are made from steel with a brilliant chrome finish. In addition to the one-piece cap and dipstick, some models also include an analog oil temperature gauge that displays from 50 to 350 degrees F. Choose the style designed for fitment with your particular bike.
( 2 )
$12.56
HardDrive offers full synthetic media oil filters for a wide range of Harley-Davidson© motorcycles from the 1990s and up—including Touring, Softail, and Dyna models. Order the replacement filter recommended for your bike. Product features: * Media enhancement by M-Pleating, increases dust holding capacity (DHC) and reduces pressure drop * The zigzag pleating pattern provides more filtration area, allowing more DHC * Additional filtration area gives the oil more room to flow, resulting in lower pressure drop * The synthetic media is resin-impregnated to ensure structural integrity during its operation under pressure and temperature spikes * Forming tapped thread for easy installation and spin-on * Pre-lubricated gasket * The gasket is lubed from the factory to aid installation * The base plate is covered with shrink film to ensure that the lube stays there until the time of usage and dust protection
Not Yet Reviewed
$10.76
—
$17.06
Clearance
For high load applications, King SM-Series rod bearings contain the strongest aluminum-based material offered by King. The alloy is strengthened by the addition of manganese and chromium. King SM-Series connecting rod bearings feature a traditional steel-backing, plus an aluminum bonding layer and the aluminum bearing alloy. These replacement sets are available for a variety of vehicle applications.
( 1 )
$25.99
$10.50
—
$21.99
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$10.99
—
$17.99
Clearance
PCV valve hoses transfer excess gasses from the crankcase to the PCV valve. If these hoses become faulty, the gas will not be transferred back into the engine, and your vehicle will be less efficient, with increased emissions and poor fuel economy. Motorcraft replacement PCV valve hoses are constructed of EPDM rubber for reliable performance in your crankcase ventilation system. These hoses are recommended by Ford Motor Company—and will resist heat, oil, grease, and other underhood additives. Choose the model designed for fitment on your vehicle.
( 1 )
$21.99
$10.99
—
$28.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
