Availability
Kibblewhite Engine Builder Series wrist pin bushings will perform under the most demanding conditions. These special bushing are made from SAE660 bearing bronze to exact tolerances and will meet or exceed the fitment and wear ability of other replacement-style bushings available. They're offered individually or in pairs and are available in stock and in a +.002 in. oversize. Kibblewhite Engine Builder Series wrist pin bushings are wrist pins for Big Twins.
Not Yet Reviewed
$15.73
Milodon balancer bolts are necessary components for any serious engine builder. When a balancer is not properly attached, not only is it dangerous, but it will not do its job of protecting the crack bearings properly. These Grade 8, heat-treated, and thread-rolled steel bolts feature a hex-style head for easy torquing and engine turning by hand. They come available in different thread sizes and underhead lengths to best suit your application needs.
( 30 )
$14.95
These K&N cartridge oil filters are designed to satisfy the needs of racers and engine builders, as well as the average vehicle owner who wants the best oil filters available. K&N cartridge oil filters trap harmful contaminants, while the filters' construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards.
( 1 )
$15.99
—
$18.99
K&N Powersports oil filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. These filters trap harmful contaminants while their design allows for high oil flow rates. They are covered by K&N's limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals. For a high-performance design with outstanding filtration, order the K&N Powersports cartridge oil filters best suited for your application. More product features include: * High-efficiency media with uniform pleats * Ideal for high-end synthetic motor oil
( 27 )
$10.99
—
$13.99
PAC Racing Hot Rod Series valve springs offer the engine and hot rod builder a mild upgrade or replacement for their hot rod. They are available in a variety of spring rates and diameters to accommodate your specific engine and camshaft profile.
( 1 )
$10.44
—
$15.49
Engine Works offers application-specific bolt and stud kits to ensure proper sealing of valve covers. Many professional engine builders prefer to use studs because of their ability to properly position the gasket and guide the cover into position. The bolts and studs are offered in a variety of thread sizes and lengths. The steel studs come with hex nuts for easy installation.
Not Yet Reviewed
$19.96
Clearance
If you're looking for pistons with an unbeatable combination of performance and value, then Speed-Pro hypereutectic pistons are for you. These pistons are manufactured from aluminum alloy that contains 16 percent silicon for greater strength and wear resistance. They're also molded in the latest permanent-mold technology to ensure the precise fit and tight bore clearances that today's top engine builders demand. Hypereutectic pistons are ideal for use in high performance street, bracket, and oval track racing—and will work perfectly with normal ring end gaps. Choose the model designed for your vehicle and engine application.
( 334 )
$35.99
$19.50
Sealed Power engine products are a complete system of application-engineered replacement components, including pistons, piston rings, engine bearings, camshafts, oil pumps, timing components and valvetrain products. Sealed Power connecting rod bearings are available with different linings to meet every engine's needs. They're made using either tri-metal or aluminum bi-metal construction for the utmost in performance and durability for all stock rebuilds and mild performance applications. Tri-metal alloys feature a steel base coated with a sintered layer of copper-lead alloy, followed by layers of electro-plated nickel and babbit to produce the ultimate bearings. Bi-metal aluminum types carry all of the same features without the babbit, as specified by many of today's top engine builders. Sealed Power bearings are available for a multitude of engines in sizes ranging from standard to 0.060 in. oversized.
( 8 )
$12.99
—
$19.99
These COMP Cams belt drive replacement components are designed for use in the ultimate in cam timing systems. These components provide competition engine builders with the most accurate valvetrain replacement components available today. COMP Cams has all of the parts you'll need, from cam gear bolts to shims, washers, gears, and more.
( 10 )
$10.95
—
$19.95
If you've been searching for a more economical alternative to titanium retainers to solve a wear problem or because of "class rules," Manley H-13 tool steel retainers are your solution. These are serious retainers for serious engine builders who demand nothing less than the very best! The H-13 tool steel retainers allow for better processing than other tool steels typically utilized, thus yielding a stronger and more durable product. They're up to 33 percent lighter than standard 10 steel retainers and are only 2 to 4 grams heavier than titanium versions. In addition, the H-13 tool steel retainers are heat-treated to provide the hardness of Rc56.
( 1 )
$14.28
Trend's G Series 4130 wrist pins come in a variety of sizes, wall-thicknesses, finishes, and coatings to better suit your application needs. These components connect the piston to the connecting rod and provide a bearing for the connecting rod to pivot upon as the piston moves. The Trend G Series wrist pins are produced from chrome molybdenum 4130 thick-wall tubing and are a popular choice with OEM's and engine builders. Superior to common 1018 mild steel alternative, these wrist pins are ideally suited for use in naturally aspirated race engines. The four operations performed in the wrist pins manufacture are as follows: Blanked to size, heat treated (60 Rockwell O.D./45 core), tumbled and ground. Order the G Series 4130 wrist pins for your application needs.
Not Yet Reviewed
$18.00
Summit Racing™ steel rocker arms are horsepower builders! These rocker arms can give you that extra lift you've been looking for. They're made from a higher quality, heat-treated steel, and have a longer slot to avoid stud interference. We even include anti-gall grooved pivot balls and locking nuts. You're getting one heck of a deal on horsepower.
( 107 )
$12.99
JE Pistons lock rings are designed for floating-pin pistons. Engines produced with press-fit pins can be converted to the "floating" type, providing that the piston has provisions for a lock ring retainer. Floating pins are preferred by most serious engine builders.
( 22 )
$10.99
—
$17.99
HardDrive cam chain guides are available for all 1999-2006 Harley-Davidson® Twin Cam engines. They are direct OE-replacement parts for worn out originals. Replacement inner and outer cam chain tensioners for Twin Cam engines are also available. The goal of HardDrive Products is to make every bike builder's dreams a reality, providing quality aftermarket parts that make a difference in style, function and performance.
Not Yet Reviewed
$11.66
The engine tear down and cleaning process can lead to broken, bent, distorted, or lost service parts. These items can be troubling to any engine re-builder, especially when they are difficult to obtain. That is why Dura-Bond offers many of the hard-to-find OEM service parts you need. All hardware is manufactured to precise OEM dimensions for exact fit.
( 74 )
$10.99
—
$19.99
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 53 )
$10.99
—
$11.99
Clearance
For three decades, Engine Works has delivered a comprehensive portfolio of high-quality, high-value, and high performance products for racers, engine builders, and weekend gearheads. These valve locks are machined from billet steel and are designed for stock or performance engines using 10 degree valve retainers. Whether you're rebuilding a stock engine or changing to valve springs that have more seat pressure, Engine Works locks offer excellent valve spring location and will provide the reliability you need.
Not Yet Reviewed
$12.46
—
$17.46
Engine Works offers a comprehensive portfolio of high-quality, high-value, and high performance products for racers, engine builders, and everyday gearheads. These oil pan bolt kits are designed for a variety of Chevrolet small block engine applications from the 1950s and up. The steel hex head fasteners have a protective black coating to resist rust and corrosion.
Not Yet Reviewed
$11.21
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
