Availability
Showing In Stock Items. Show All 415 Items.
ACDelco GM Genuine Parts rocker arms are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles. That means the purchase of ACDelco GM Genuine Parts rocker arms will provide the correct fit and performance, delivering an easier install along with the optimal operation in your vehicle. The rocker arms are offered in different styles, ratios, and mounting options. They're available for hundreds of applications.
( 1 )
$15.99
—
$17.99
Chevrolet Performance LSX block lifter guides are designed specifically for use on Chevrolet Performance LSX blocks. These 8 in. x 4 in. x 4 in. composite lifter guides will help properly complete your build or repair so you can get back on the road. Don't take chances with arbitrary inexpensive versions—order Chevrolet Performance LSX block lifter guides.
Not Yet Reviewed
$19.84
Are you putting new cams in your engine? These Trick Flow® roller followers will help you get the job done right and get the most out of your cams. Featuring hardened steel construction, Trick Flow® roller followers are the perfect OE-style replacements for 4.6/5.4L 2V or 4V modular engines.
( 3 )
$14.99
—
$18.99
No camshaft swap is complete without a new set of lifters. Treat your engine to the "good stuff" with new Trick Flow® hydraulic lifters or lash adjusters. Featuring durable hardened steel construction, these lifters and adjusters are a must when installing new cams—and are perfect replacements for worn or ticking lifters in used engines. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods. The sets are available in a variety of fitment options for applications from 1955 and up.
( 47 )
$11.99
—
$16.99
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 26 )
$17.99
—
$21.99
Mopar Replacement rocker arms offer an original equipment fit. That means their fitment and install will be hassle-free. These genuine OE Mopar parts will help to keep your vehicle's engine running its best. Select the Mopar Replacement rocker arms designed for fitment for your vehicle application.
( 18 )
$11.99
—
$15.99
Melling Performance PRO-Line pushrods give you the reliability that you need from your valvetrain. They are manufactured from high-quality carbon steel, are hardened for use with guideplates, and exceed OEM specifications. Their pushrods also feature close-tolerance wall thickness and a centerless ground to make sure that they are a matched set. Choose Melling Performance PRO-Line pushrods to keep your valvetrain operating efficiently.
( 6 )
$10.99
—
$19.99
Sealed Power Hi-Rev hydraulic lifters operate at or near zero lash for higher rpms without adjustment, unlike a mechanical setup. They have a reduced internal height to maintain the proper valvetrain geometry of a stock rebuild. They are recommended for high-performance street and racing use.
( 2 )
$14.99
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 324 )
$17.95
—
$30.95
ACDelco GM Genuine Parts engine camshaft retainer plates are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles, so you can be confident they will fit and perform just like the originals they are replacing. Select the thrust plates designed for your vehicle.
( 4 )
$14.99
Trend Performance is an industry standard in high performance valvetrain technology and a leader in pushrod manufacturing. Manufactured in house, Trend pushrods are one-piece, centerless-ground 4130 chrome molybdenum pieces available with range of wall thicknesses, tube diameters, and lengths. They are pre-formed and centerless ground. Trend's stocking pushrods are designed for use in oval track race cars, drag race cars, hot rods, sport compacts, and marine applications. They are manufactured with 5/16 in. ball/ball ends and are available in lengths of 6.00 in. to 11.55 in. in increments of .025 in. The ball ends are machined to a tolerance of plus or minus .001 in. and the pushrods are laser-etched with the part number and specifications on a black oxide finish.
( 5 )
$10.99
—
$19.50
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 38 )
$10.99
—
$18.99
ACDelco hydraulic lifters and lash adjusters will help maintain a consistent rate between your rocker arms and the engine valves. Periodic adjustments of the valve lash are often necessary for peak performance. These OE-style replacement lifters are made to GM specs, maintaining a proper lash condition while preventing unnecessary valvetrain wear and noise. Order the style and model designed for fitment on your specific vehicle.
( 1 )
$12.99
—
$20.99
AFR replacement stainless steel valves are designed to fit your AFR cylinder heads without any modifications. They are made from stainless steel with chrome stems and hardened valve tips. AFR replacement stainless steel valves are also swirl-polished and fully machined. Both the materials used, and the heat-treating process are superior to the original equipment replacement pieces.
( 6 )
$21.00
Timing chains stretch over time and become slack. Melling timing chain tensioners will retain the efficiency of your timing chain. These quality-built steel components keep your chain under the proper tension for optimum performance in your engine. So, if your old tensioner is allowing your timing chain to "slack off," replace it with a Melling!
( 3 )
$12.99
—
$17.99
COMP Cams Magnum pushrods are the perfect complement to your Hot Street, bracket, oval track, or any other high performance engine. One-piece Magnum pushrods are made of C1020 high-carbon, .080 in. wall chromoly steel and are heat-treated for use with guideplates. They're an affordable way to combat higher spring pressures and the other stresses associated with high performance engines.
( 450 )
$15.95
—
$22.95
ACDelco GM Genuine Parts engine valve lifter guides keep the lifters from rotating. These GM-recommended replacements deliver peace of mind that the fit, form, and function are of the highest standards. Order the guides designed for your GM year/make and engine application.
( 5 )
$12.99
—
$17.99
Melling rocker arms, available for both domestic and import applications, meet or exceed OEM specifications. Depending on the OE design specifications, Melling rocker arms are provided in either stamped or cast materials. Built from only the best materials and manufacturing processes available, they are perfect replacements priced right for your budget. Melling recommends installing new rocker arms with every engine rebuild to assure long engine life and efficient performance. Answer the little knock under your hood with replacement rocker arms from Melling--a supplier of quality engine parts.
( 72 )
$10.99
—
$22.99
Chevrolet Performance offers these valve springs for a variety of applications, and because they come from Chevrolet Performance, you can be assured that you're getting the right valve springs for your needs.
( 7 )
$10.99
—
$17.79
It's never a good idea to cut corners when you're installing new valves. Melling is noted for its world-class engineering, superior grade alloy materials, and advanced manufacturing processes. Melling intake and exhaust valves meet the exacting specifications required for efficient, durable, and powerful performance. They feature high-fatigue strength, excellent heat resistance, and offer years of dependable service. Available in a wide variety of designs and materials for most OEM and performance vehicle applications, each valve is built and validated to meet or exceed OE specifications. Melling valves—unsurpassed quality you can trust.
( 44 )
$10.99
—
$20.99
COMP Cams dual taper pushrods feature a unique dual taper for high strength and lightweight construction. They are manufactured from special steel alloy and utilize a 210-degree tip for an increased load-bearing surface. COMP Cams dual taper pushrods feature a .165 in. wall thickness to withstand today's high-pressure valve springs.
( 3 )
$20.95
—
$26.95
Mopar Performance valve springs are made from stronger steel than OEM and are intended for general performance use. They're available for many applications in single and dual versions. And make a great choice for your muscle car.
( 4 )
$13.99
—
$15.99
COMP Cams straight tube pushrods feature an extra-thick .125 in. wall and an ultra-rigid large 7/16 in. diameter design that prevents the damaging valvetrain vibrations that occur when smaller diameter pushrods snap back into position. These straight tube pushrods are offered in a variety of lengths and are precision-made with high-strength materials for consistency and accurate geometry. Selecting the correct pushrods is critical for proper valvetrain operation. You can count on COMP Cams for the quality components you need to keep your engine running right!
( 4 )
$17.95
—
$24.95
BTR VVT Phaser Limiters enable you to either limit or completely eliminate the VVT function on your Gen IV LS engine or Gen V LT engine. The Comp Cams phaser tool (purchased separately) is required to disassemble your cam sprocket and install the limiter or lockout.
Not Yet Reviewed
$19.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
