Availability
Showing In Stock Items. Show All 85 Items.
Mopar Performance valve springs are made from stronger steel than OEM and are intended for general performance use. They're available for many applications in single and dual versions. And make a great choice for your muscle car.
( 4 )
$13.99
—
$15.99
Mopar Replacement rocker arms offer an original equipment fit. That means their fitment and install will be hassle-free. These genuine OE Mopar parts will help to keep your vehicle's engine running its best. Select the Mopar Replacement rocker arms designed for fitment for your vehicle application.
( 18 )
$11.99
—
$17.99
Clearance
Mopar Replacement lifters offer an original equipment fit. That means their fitment and install will be hassle-free. Whether you call them lifters, tappets, or followers, these genuine Mopar replacements will fit the profile of your camshaft lobes to keep your engine running its best.
( 4 )
$11.99
Mopar Replacement pushrods are genuine OE-replacements. That means your Chrysler, Dodge, Jeep, or Ram will receive the perfect part to repair and/or restore your vehicle's performance and safety, just as it should be.
Not Yet Reviewed
$14.99
Mopar Replacement valve springs are manufactured from durable quality materials, just like the originals, to fit just like the originals. Over time your valve springs can start to break down and cause huge problems. Choosing genuine Mopar parts delivers the confidence that you have the right part, with the right fit, and the right performance to restore and/or repair your Chrysler, Dodge, or Jeep properly and safely. Order the model you need.
Not Yet Reviewed
$10.99
Clearance
Mopar Replacement intake and exhaust valves are genuine OE-replacements. That means your Chrysler, Dodge, will receive the perfect part to repair and/or restore performance and safety, just as it should be. Select the intake and exhaust valves designed for your application needs.
Not Yet Reviewed
$26.99
—
$42.99
$12.50
—
$16.50
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 109 )
$22.95
Stress placed on cams and timing sets in today's racing engines produces a weak area at the front of the block. COMP Cams solved the problem with their moly-coated wear plates and thrust bearings. They are a must for all Chevy big block engines. The thrust bearings are a one-piece encapsulated design for the Chevys and a 3-piece design for Fords.
( 19 )
$19.95
—
$22.95
Cloyes wear plates prevent your cam from walking and provide a good anti-friction surface. Cloyes offers several styles of wear plates for various applications.
( 7 )
$13.99
—
$19.99
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 153 )
$14.95
—
$25.95
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 28 )
$24.95
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. The Magnum series studs work well in applications with moderate lifts and spring pressures. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. COMP Cams studs have generous radii and feature a black oxide finish.
( 24 )
$13.95
These COMP Cams rocker arm shaft spacers are designed to allow the engine to rev higher and reduce the possibility of parts breakage. They are used on engines with adjustable rocker arms to improve valve tip alignment.
( 1 )
$17.95
These COMP Cams Pro Magnum hydraulic lifters are specifically designed to perform at higher engine speeds. When engines are equipped with a hydraulic camshaft, high rpm is limited by the improper positioning of the internal piston as the lifter inevitably "pumps up." This improper location results in broken valves, and, therefore, leads to lost power or sometimes even engine failure. These lifters offer a distinct advantage over standard high-performance hydraulic lifters, especially in race applications where a hydraulic lifter must be used.
( 38 )
$15.95
COMP Cams Performance Series solid lifters are specifically designed for high-end street and race applications. They feature a precision-ground crown radius and surface finish to promote performance camshaft compatibility and high-rpm durability. The lightweight design and premium one-piece pushrod seat provide an extended rpm range, and their accurately located oil band yields a consistent, properly metered oil flow.
( 23 )
$20.95
—
$26.95
Do you have a new timing cover, or one that lacks a timing pointer? If so, then you clearly need a great looking pointer to complete the package. Milodon has the perfect accent to your timing cover. They will look great with your cover and are marked off with a wide span of degrees both before and after TDC, so you can get the precise timing setting that you need.
( 52 )
$12.95
On Sale
Manley Race series performance valves are a great choice for your bracket, oval track, or high performance street engine. All valves are made from stainless steel (intakes are NK-842; exhausts are XH-426) with chrome stems and hardened valve tips. In addition to being made from high-quality materials, Race series valves are swirl polished and fully machined.
( 76 )
$22.45
$21.33
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 325 )
$19.95
Cloyes engine timing sets meet OE performance requirements. They utilize the latest in design and materials so you can enjoy quiet, maintenance-free performance. These sets are available in various timing chain styles, such as link belt, single roller, and single non-roller. The gears are made from high alloy steel, and heat treated for durability; while the chain is pre-stressed, and heat treated for longevity. Order the timing set designed for your specific model application.
( 7 )
$20.99
COMP Cams roller lifter link bars are designed to replace your worn or damaged link bars, when fitted to COMP Cams roller lifters. They are precision-crafted from stainless steel and wear-coated for a long life in all applications.
( 1 )
$14.95
On Sale
Manley Severe Duty series performance valves are a great choice for your high performance or race engine. All valves are made from stainless steel (intakes are NK-844; exhausts are XH-428) with chrome stems and hardened valve tips. Severe Duty series valves are made of superior materials, are fully machined and swirl polished, and are available with either undercut "Pro Flo" stems or straight stems.
( 17 )
$22.45
$21.33
COMP Cams Magnum pushrods are the perfect complement to your Hot Street, bracket, oval track, or any other high performance engine. One-piece Magnum pushrods are made of C1020 high-carbon, .080 in. wall chromoly steel and are heat-treated for use with guideplates. They're an affordable way to combat higher spring pressures and the other stresses associated with high performance engines.
( 454 )
$15.95
—
$17.95
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. COMP Cams valve spring retainers are the solution. Precision-machined, these retainers are specifically designed for positive location when combined with COMP Cams' valve springs. They're available for single, double and triple-spring applications.
( 164 )
$11.95
Clearance
Continental OE Technology Series timing belts are designed to deliver precise, non-slip timing. Engineered with OE Solutions Technology and made to last, these belts are constructed with enhanced rubber compounds, reinforced with fiberglass and aramid cords. They resist shrinkage and stretching; plus, the premium polymers offer exceptional heat and abrasion resistance. The molded teeth resist deformity and offer improved rigidity to ensure a long, dependable life. Hundreds of replacement belts are available for applications from the 1970s and up.
( 5 )
$14.99
—
$15.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
