Availability
S&S Cycle Late Twin Cam Easy Start chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Easy Start kits allow the stock starter to start any engine regardless of compression ratio! Order the kit recommended for your particular Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Easy Atart chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,955.66
—
$2,529.95
K&N premium oil filters for powersports vehicles utilize an innovative, highly efficient synthetic-blend filtration media designed to be compatible with synthetic, petroleum-based, and blended oils, including the high concentrations found in synthetic racing oils. The heavy-duty canister is engineered to be exceptionally durable, and a 17mm welded hex nut can be used for quick and easy filter removal. Engineered to support exceptionally high flow rates while providing outstanding protection from harmful engine contaminants, each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers. For a high-performance design with outstanding filtration, order the K&N premium powersports canister oil filters best suited for your application. More product features include: * Pleated synthetic-blend filtration media * Pre-drilled nut for safety wire attachment * Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength * Designed to operate with all synthetic, conventional, and blended motor oils
( 94 )
$15.41
—
$17.99
Summit Bucks
S&S Cycle offers several Super Stock cylinder heads to choose from for your motorcycle. They feature premium valves and high flowing ports to supply your engine with plenty of air, as well as high performance valve springs that may allow installation of cams with up to .650 in. of lift (depending upon cylinder heads chosen). Super Stock cylinder heads are also available in different finishes. Select the ones designed for your bike.
Not Yet Reviewed
$1,428.26
—
$1,999.95
Inspired by S&S Pro Stock drag race engines, S&S Cycle 4 in. Sidewinder big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing, or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 4 in. Sidewinder kits offer the biggest cylinder bore that can be installed in a stock crankcase without machining! Features: * Low-friction ductile cast iron liner * 10.5:1 compression * Bolts in with no machining, balancing, or splitting the crankcases * 88 in. engines are boosted to 100 in. * 96 in. and 103 in. engines are boosted to 110 in. * Complete kits include cylinders, pistons, gaskets, and instructions * Wrinkle black and silver cylinders that match stock finish
Not Yet Reviewed
$1,395.86
—
$1,435.46
S&S Cycle billet oil pumps are designed and built for your V-Twin. They feature a smoother design from beautiful strong billet and pressure relief towers that are .300 in. shorter than your OEM oil pump. Kits may include: * Pump with cover * Mounting bolts * Supply and return gears * Driveshaft with keys and snap rings * Check ball and spring * Pressure relief valve and spring * Check ball and release valve cover screws with O-rings * Miscellaneous hose fittings, plugs, screws, and gaskets
Not Yet Reviewed
$395.06
S&S Cycle precision tappets are high performance replacements for S&S Cycle's previous standard and premium lifters for M8, Twin Cams, and late Sportster applications. Each precision tappet is hand assembled to exacting tolerances and designed for quiet operation and rapid pump up. Features and benefits: * Reduced valve train noise from start-up to shut down * Close tolerances for low leak-down rates * Fast pump up and superior high-rpm performance
Not Yet Reviewed
$251.96
Wiseco powersports 4-stroke forged series piston kits include your rings, piston pin, and circlips. Wiseco has a decade of experience producing quality pistons for dirt bikes, motorcycles, ATVs, snowmobiles, and outboard marine engines. Their piston kits provide strong, lightweight pistons with optimized designs that improve engine efficiency and maximize your torque and throttle response. Plus, Wiseco powersports piston kits are produced right here in the USA. It's time to blaze your own trail with these Wiseco powersports piston kits! Order the piston kit designed to fit your application.
( 1 )
$183.99
—
$624.97
Easily installed, easily removed--S&S Cycle Quickee adjustable pushrods are designed for a simple, trouble-free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! Innovative Quickees feature threaded adjusters that screw into the pushrods until the threads disengage and the adjuster simply slides into the pushrods, making your installation or removal easy. Then, once the pushrods are installed and adjusted, the locknut keeps the adjuster from moving. They will work with stock and aftermarket cams, as well as stock pushrod covers. S&S proven performance makes life easier with their Quickee adjustable pushrods.
( 1 )
$188.96
—
$303.26
COMP Cams twin cam Thumpr camshafts are designed as a serious performance upgrade with hard-hitting sound! They feature an aggressive design that provide a thumping exhaust note and they provide a great performance upgrade to any 103 cu. in. and larger twin cam engine. The cams feature a sophisticated "Endurance Ramp" lobe design that makes great power but is easy on the tappets and valve train for long life. They feature a wide power band and pull great up to 5,400 to 6,400 rpm dependent upon the camshafts selected, and engine combination. The cams are made from 8620 billet steel and have been shown to make greater gains in power, acceleration, and throttle response when tested with larger throttle bodies. Put more power to the ground, and make some noise with Comp Cams twin cam Thumpr camshafts.
( 1 )
$243.95
COMP Cams V-Thunder performance replacement lifters feature a rigid nodular cast iron body with a 52100 bearing, axle, and wheel assembly for strength. They utilize an advanced ultra-high flow metering system that allows more oil movement through the engine to aid in cooling. Each lifter is precision I.D. ground, matched with a graded piston, and features a high-performance retaining ring. Keep your valvetrain stable with COMP Cams V-Thunder performance replacement lifters.
Not Yet Reviewed
$58.95
—
$213.95
COMP Cams twin cam camshafts are designed as a performance upgrade, that offer more power with long valve train life. These camshafts provide a great performance upgrade to any 103 cubic inch and larger twin cam engine. The cams feature a sophisticated "Endurance Ramp" lobe design that makes big power but is easy on the tappets and valve train for long life. They feature a wide power band and pull great up to 5200 – 6200 RPM dependent upon the camshafts selected, and engine combination. The cams are made from 8620 billet steel for added strength and durability. Upgrade your camchest by installing a set of Comp twin cam camshafts.
( 5 )
$243.95
S&S Cycle standard adjustable pushrods help to assure consistent valvetrain operation under all conditions. The pushrods are made from rigid chromoly steel tubing and offer a simple, trouble-free installation. You can purchase just the pushrods or as a set with pushrod covers, O-rings, and cover keepers. Replace the stock, non-adjustable pushrods in your stock or high performance application with S&S Cycle standard adjustable pushrods, available for a wide range of Harley-Davidson® bikes from 1984 and up.
( 1 )
$139.46
—
$279.95
Summit Bucks
S&S Cycle cylinder studs are the perfect replacement for your OEM or S&S cases. These steel head studs are black oxide coated and strong enough to use on the largest of V-twin engines. So next time you do a top end on your Harley-Davidson®, update those head studs with S&S cylinder studs.
Not Yet Reviewed
$45.86
—
$55.76
Summit Bucks
S&S Cycle Late Twin cam chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. They're available for a variety of Harley-Davidson© street bikes from 2006 and up. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,079.96
—
$1,854.86
S&S Cycle standard forged rocker arms are designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller arms are available in the stock 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$294.26
KB Performance V-Twin piston and ring kits bring all of the knowledge and experience of a legendary engine builder to the world of high performance motorcycles. These pistons use the latest manufacturing techniques and standards to ensure quality and maximum available performance. The kits are offered in hypereutectic 390 alloy and forged 4032 low-expansion alloy. KB Performance V-Twin piston and ring kits are available for Harley-Davidson® and Indian motorcycles in a variety of engine sizes and compression ratios.
( 19 )
$146.99
—
$252.99
Summit Bucks
S&S Cycle early Twin Cam chain drive cam chest replacement kits are designed to upgrade your early 1999-2006 Twin Cam to 2007-16 style camshafts and oil pump. Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Order the kit recommended for your specific Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Inner and outer camshaft bearings * Quickee pushrods * Pushrod tubes * Available with or without chain drive camshafts * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,499.95
—
$1,854.86
WIX oil filters play a vital role in in your vehicle's lubrication system, protecting your engine from premature wear. As gearheads know, every moving part in the engine requires clean oil! WIX oil filters trap more dirt than the leading national brand, and they keep filtering long after the competition has completely quit. WIX patented the first spin-on oil filter in 1954 and has been at the forefront of filter technology ever since. Canister-style oil filters feature strong, full-metal base plates to prevent leaks at the double seam under severe driving conditions. They also offer glass-enhanced media that improve each filter's ability to catch and hold engine-damaging dirt. Choose the WIX oil filter to fit your make and model—for a cleaner-running engine over many extra miles.
( 374 )
$7.99
—
$10.99
Summit Bucks
S&S Cycle 107 in. big bore kits are easy to install and require no machining or re-balancing. These are the largest bores that can be fit in your stock engine case. This is the largest bore that can be fit in a stock engine case. Stock engine height is maintained so there are no manifold or frame fitment issues. Using an 11-fin design, the pre-finished cylinders closely resemble the OEM shape and are ready to install. Take your stock engine case as big as it'll go with S&S Cycle 107 in. big bore kits! Product features include: * CP pistons feature a 3cc pop-up dome for slightly higher compression * Cylinders feature an increased fin area for better heat dissipation * Centrifugal cast gray liner features 40,000 psi tensile strength for superior wear and performance
Not Yet Reviewed
$1,175.36
Summit Bucks
On top of being constructed from superior materials, S&S Cycle's Evolution cylinders have thicker castings, larger cooling fins, and better wear resistance than stock cylinders. The design, finish and workmanship of these replacements corresponds to the stock counterparts that they replace. The cylinders feature ductile cast-iron sleeves in aluminum castings and are available in natural or black powdercoat finish to match OEM components. Individual cylinders and cylinder sets without pistons are bored slightly under size and are not honed, so they may be finish-honed to fit your pistons. Select the cylinders designed to fit your specific Harley-Davidson® model.
Not Yet Reviewed
$815.95
—
$1,499.95
Summit Bucks
S&S Cycle 110 in. Power Packages are the ideal combination of performance and savings to transform your Twin Cam HD without breaking the bank. Bump the early Twin Cam from late 96ci or 103ci to 110ci, as well as add matched cams/cam plate/oil pump and everything else a high performance cam chest needs to reliably make big power. Features: * 4 in. bore bolt on cylinder and piston kit * 10.5:1 compression * Wrinkle black finish * S&S 585 Easy Start cams in either gear or chain version * TC3 oil pump * TC3 cam plate * S&S cam chain tensioners or outer cam drive gears * Quickee adjustable pushrods with tubes * S&S precision tappets * Low-friction ductile cast iron liner * Bolts in with no machining, balancing, or splitting the crankcases * Cylinders fit to pistons--no machining required * All parts required to upgrade to gear drive cam or hydraulic tensioners in one easy to order part number
Not Yet Reviewed
$2,992.95
—
$3,121.16
Replace worn out breather gears with the heavy-duty steel versions from S&S Cycle. Manufactured from industry-leading materials and using up-to-date equipment, they ensure everlasting reliability and enduring value. Order the S&S breather gears designed for your motorcycle application. Product features include: * All-steel construction for superior dimensional stability; abrasion * Welded-in screen * Higher flow than stock * Elongated breather pocket scavenge hole for increased solution * Improved oil scavenging from breather gear pocket * Options: Standard diameter for replacement or new builds or Plus .030 in. diameter for damaged engines
Not Yet Reviewed
$140.36
COMP Cams Evolution magnum hydraulic roller camshafts are high performance camshafts designed for your Harley-Davidson®. They are constructed from superior-quality materials to bring the best possible performance to your ride. If you're looking to upgrade your Harley®, COMP Cams Evolution magnum hydraulic roller camshafts are must-haves.
Not Yet Reviewed
$205.95
—
$325.95
WIX Filters chrome oil filters are a chrome plated version of the same high-quality WIX filter you normally use, but with a show-quality finish.
( 3 )
$15.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
