Availability
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$19.99
—
$22.99
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 509 )
$17.99
Sealed Power hydraulic lifters are precision-manufactured to maintain precise valve timing under all operating conditions. A patented constant orifice metering valve provides precise oil metering to the overhead valvetrain, and longer plungers or pistons provide increased bearing surfaces, resulting in longer lifter life. Their check valves are lightweight flat discs, allowing for higher speeds and more uniform operation than competitive lifters.
( 51 )
$7.99
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 116 )
$5.99
—
$10.99
An engine running on dirty oil won't last. Keep it clean with an ACDelco Gold oil filter. They help trap particles up to 25 microns, or one-third the width of a human hair, thereby improving the quality, performance, and lifespan of your engine. ACDelco makes oil filters to fit 99 percent of all cars, light trucks, and sport utility vehicles on the road today. Order the model designed for your engine application. Additional features include: * Excellent filter capacity, enhanced efficiency, consistent flow management, and high durability * Tight seals to prevent unfiltered oil from entering your engine * Consistent, dependable oil filtration throughout the filters
( 175 )
$6.99
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 75 )
$29.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 350 )
$110.99
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 38 )
$17.99
WIX oil filters play a vital role in in your vehicle's lubrication system, protecting your engine from premature wear. As gearheads know, every moving part in the engine requires clean oil! WIX oil filters trap more dirt than the leading national brand, and they keep filtering long after the competition has completely quit. WIX patented the first spin-on oil filter in 1954 and has been at the forefront of filter technology ever since. Canister-style oil filters feature strong, full-metal base plates to prevent leaks at the double seam under severe driving conditions. They also offer glass-enhanced media that improve each filter's ability to catch and hold engine-damaging dirt. Choose the WIX oil filter to fit your make and model—for a cleaner-running engine over many extra miles.
( 376 )
$6.99
—
$11.99
Summit Racing™ extended-life oil filters keep your engine free from contaminants. Our canister-style filters feature proprietary synthetic filter media that offers high filtration and low restriction—longer. These economical oil filters deliver up to 10,000 miles of engine protection. Order the model recommended for your vehicle and engine application. Summit Racing™ extended-life oil filters feature: * Durable 0.5mm thick steel canister for withstanding high operating pressures * High-capacity can design for trapping and holding dirt * 98 percent multi-pass particle removed efficiency * High-quality pressed steel baseplate * Silicone sealing gasket * Roll-tap formed threads to help prevent vibration fatigue * Silicone anti-drain-back valve that protects engine during start-up * Filter bypass relief valve if filter media becomes blocked * Textured powdercoating to ensure durability and deliver enhanced grip * Protective film over filter opening to prevent debris from contaminating filter prior to installation
( 39 )
$7.99
With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, Fram Extra Guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection. Extra Guard filters are the perfect filter for everyday drivers who perform frequent maintenance on their vehicles Features include: * Engineered for conventional motor oil * Cellulose and glass blended media provides protection for up to 5,000 miles * 95 percent filtration efficiency * Internally lubricated sealing gasket for easier filter removal * Precision-molded nitrile anti-drainback valve for start-up engine protection * Coil spring with glass fiber reinforced nylon poppet relief valve * Sure Grip coating provides a non-slip finish for easier installation and removal
( 132 )
$3.88
—
$18.39
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 33 )
$6.99
—
$8.99
COMP Cams High Energy camshafts are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These cams offer an increase in both gas mileage and power throughout the rpm range for most street applications.
( 61 )
$367.95
ACDelco Gold PCV valves are high-quality aftermarket components. The PCV (positive crankcase ventilation) valve controls the volume of crankcase vapors that are drawn into the intake manifold. A restrictive PCV valve can cause oil leaks or increase oil consumption. These replacements have been manufactured to meet or exceed your expectations for fit and performance. Order the model recommended for your vehicle.
( 40 )
$4.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 312 )
$42.99
Edelbrock's Signature series chrome valve covers are engineered for function and styled for good looks. They're triple chrome plated for long lasting good looks and have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valves, and include rubber grommets for the breather and PCV valve holes. The covers clear most aluminum rocker arms and moderate lift cams. Some applications come in a high-profile design that's 1 1/4 in. taller than stock and clears most roller rockers and valvetrain components, and a low-profile design that clears air conditioning and alternator brackets.
( 158 )
$76.95
PRW SFI-rated racing dampers are perfect for the weekend warrior or the all-out racer! Many features have been added to broaden the spectrum of fitment and adaptability. The inner hub and outer ring are manufactured from high-quality billet steel forgings, with heated elastomer injected between the two components parts. Their inner and outer grooved ridgelines further secure the inner hubs to the outer rings. PRW dampers are available in a black epoxy or polished steel with an epoxy clearcoat, and meet SFI 18.1 specifications. Features and specs include: * Manufactured from high-grade billet carbon steel forgings * Accurate crank bore for proper pressed-fit * Easy-to-read laser engraved timing marks * Externally balanced dampers include removable counterweights
( 15 )
$208.51
—
$219.61
Standard Motor Products replacement PCV valves are emissions-control devices that route unburned crankcase blowby gases back into the intake manifold where they can be re-burned. By totally eliminating crankcase emissions, the constant recirculation of air through the crankcase helps to remove moisture, which would otherwise cause sludge to form. Standard Motor Products replacement PCV valves will extend the life of the oil and the engine.
( 52 )
$5.99
Sealed Power cast piston rings are part of the comprehensive line of Sealed Power engine components that provide innovative designs, use leading edge materials, and utilize ISO and QS certified manufacturing to deliver top-quality products that meet the rigorous demands of both classic and today's modern engines. Features of and benefits of Sealed Power cast piston rings include: * Variety of top ring and top ring facing materials * Decreased friction * Very resistant to scuffing * Exacting tolerances * Meets or exceeds OEM specifications
( 82 )
$25.99
—
$35.99
Stop the leak! Harmonic balancer repair sleeves from Pioneer are an easy, economical way to repair certain automotive oil leaks. Is your balancer is well-worn, with grooves allowing oil to leak past the crankshaft seal in the timing cover? These durable repair Pioneer sleeves create a smooth new surface. Simply order the parts that match your vehicle specs.
Not Yet Reviewed
$15.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$80.99
—
$129.99
Sealed Power Performance piston rings are made from ductile iron, and compression rings are available with moly, chrome, and plasma-moly facings for extra durability. These OE-quality sets will seal mild- to high-compression engines and help protect against oil blowby. They feature standard ring end gaps for easy installation. Find the bore dimension and ring thicknesses needed for your application.
( 318 )
$48.99
—
$94.99
Summit Bucks
Fel-Pro harmonic balancer repair sleeves are designed to prevent the leaks associated with your timing cover seal. These handy service accessories are made of steel and will help seal the gaps caused by worn-out harmonic balancer shafts. The sleeves are available for thousands of vehicle and engine family applications.
( 31 )
$9.99
—
$24.99
Ordinary oil filters use only cellulose media, but Fram Tough Guard oil filters add microscopic synthetic fibers, creating small windows that trap microscopic dirt particles without affecting the flow of oil. Blending synthetic fibers with cellulose increases a filter's dirt-trapping efficiency and its dirt-holding capacity for higher levels of engine protection and longer filter life. Tough Guard filters are the perfect filter for drivers who push their vehicles in stop and go traffic, towing, and extreme weather conditions Features include: * Engineered for premium conventional and synthetic blend motor oil * Synthetic blend filter media technology provides protection for up to 10,000 miles * 99 percent filtration efficiency * Sure Grip coating provides a non-slip finish for easier installation and removal * Coil spring with glass fiber reinforced nylon poppet relief valve * Silicone anti-drainback valve provides start-up engine protection-up to three times the hot oil resistance as nitrile valves * Internally lubricated sealing gasket for easier filter removal
( 13 )
$6.82
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
