Availability
Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance
Not Yet Reviewed
$2,449.95
—
$2,549.95
Vintage Air offers their totally cool Front Runner engine drive systems for your small block Ford! With a unique design focused on performance, Vintage Air Ford systems are strong, compact, and extremely good looking. They feature a patented, one-piece, forged aluminum timing cover with integral accessory mounts and utilize a spring-loaded tensioning system for no-nonsense, trouble-free operation. Systems are available for power steering with or without pump and non-power steering applications in your choice of bright or black hard coat finishes. Vintage Air Ford Front Runner engine drive systems may include: * ARP stainless 12-point bolt and hardware * 170 amp alternator * Dayco OEM tensioner * Timing cover gasket set * Dayco serpentine drive belt * Power steering pump * 4-bolt crankshaft pulley * High performance water pump * Water pump pulley * Power steering pump pulley
( 11 )
$1,139.99
—
$3,197.99
Holley's Ford 7.3L Godzilla high-mount accessory drive complete kits with their patent-pending technology, integrates timing cover, oil pump, oil pan, water pump, alternator, and the option for A/C and/or P/S, all in one streamlined system. Plus, they are compatible with both factory crank pulleys and aftermarket damper/pulleys. Positioning an engine swap correctly is crucial, ensuring it aligns with the vehicle's original engine's crankshaft centerline. Holley's innovative solution achieves just that, allowing proper engine placement while providing clearance for a stock Fox Body hood (when used with a low-profile intake). Our system replaces Ford's sump-mounted oil pump with a high-capacity gerotor pump positioned behind the timing cover, gaining crucial crossmember and ground clearance. To ensure reliability, they incorporated a proven pump design utilizing Melling sourced components that mimics the factory pressure level. Unlike most pumps that require removing the oil pan to change the pressure spring, Holley introduced a first-of-its-kind external access port, allowing hassle-free spring switching. Moreover, their cast aluminum oil pan features a performance-minded windage tray and baffle, guaranteeing proper oil pickup during high-G maneuvers. For extreme situations, such as drag racing, upgrade to the optional race baffle to always ensure proper oil delivery. These accessory drive systems offer flexible configuration options to meet various needs, making Holley's Godzilla high-mount accessory drive kits the ultimate solutions for engine swaps, offering unparalleled functionality, adaptability, and ease of installation. Choose from natural as-cast aluminum or black finish.
Not Yet Reviewed
$2,599.95
—
$3,199.95
March Performance Style Track serpentine systems are created with a combination of high style and low price that will find favor among car enthusiasts everywhere. The systems have a unique, easy-to-use belt tension adjustment tool. Once the belt tension has been set, the adjustment tool is easily removed and stowed away until the next time that the belt requires adjustment. Nearly 150 models are available, designed for fitment on specific applications. Assembly options include with or without power steering pump or A/C compressor; crankshaft pulley finish; bolt hole quantity; and water pump material. Order the replacement serpentine system recommended for your vehicle.
( 52 )
$1,567.99
—
$3,119.99
Holley's Ford 7.3L Godzilla high-mount accessory drive base kits with their patent-pending technology, integrates timing cover, oil pump, oil pan, water pump, alternator, and the option for A/C and/or P/S, all in one streamlined system. Plus, they are compatible with both factory crank pulleys and aftermarket damper/pulleys. Positioning an engine swap correctly is crucial, ensuring it aligns with the vehicle's original engine's crankshaft centerline. Holley's innovative solution achieves just that, allowing proper engine placement while providing clearance for a stock Fox Body hood (when used with a low-profile intake). Our system replaces Ford's sump-mounted oil pump with a high-capacity gerotor pump positioned behind the timing cover, gaining crucial crossmember and ground clearance. To ensure reliability, they incorporated a proven pump design utilizing Melling sourced components that mimics the factory pressure level. Unlike most pumps that require removing the oil pan to change the pressure spring, Holley introduced a first-of-its-kind external access port, allowing hassle-free spring switching. Moreover, their cast aluminum oil pan features a performance-minded windage tray and baffle, guaranteeing proper oil pickup during high-G maneuvers. For extreme situations, such as drag racing, upgrade to the optional race baffle to always ensure proper oil delivery. These accessory drive systems offer flexible configuration options to meet various needs, making Holley's Godzilla high-mount accessory drive kits the ultimate solutions for engine swaps, offering unparalleled functionality, adaptability, and ease of installation. Choose from natural as-cast aluminum or black finish.
Not Yet Reviewed
$1,549.95
BluePrint Engines offers accessory drive systems for a variety of year/make and engine applications. Unless otherwise noted, the systems contain the various crankshaft pulleys; water pump components; power steering pulleys, brackets, and pump; alternator pulleys, brackets, and parts; and necessary hardware. Order the drive system recommended for your vehicle.
( 1 )
$849.95
—
$2,199.95
Lares power steering pulleys are designed to fit your OEM pulley setup. Manufactured from quality materials, and available for a wide variety of applications, each power steering pulley meets OE specifications to ensure a precise fit and proper function. Keep your steering system operating reliably, order the Lares power steering pulley in the application you need.
( 25 )
$18.99
—
$25.99
On Sale
Professional Products pulley spacers make up the difference. These spacers are made from quality aluminum or steel, depending on the application, providing proper fitment for pulley alignment.
( 55 )
$23.99
—
$26.99
$21.59
—
$24.29
March Performance revolver serpentine conversion kits feature a solid one-piece bracket that provides rigid support for the alternator and power steering. A separate, low-mount driver side bracket allows for the option of power steering or no power steering. The March Performance revolver serpentine conversion kits feature a unique, easy-to-use belt tension adjustment tool. Once the belt tension has been set, the adjustment tool is easily removed and stowed away until the next time that the belt requires adjustment. As a result, these kits display a much cleaner appearance.
( 10 )
$1,685.99
—
$2,153.99
Scott Drake crankshaft pulleys are designed from steel and painted black. These 2-groove crank pulleys are used when adding power steering to a manual steering car. Their 3-bolt design will fit 1965-68 289 and 302 engines. Notes: They will not fit later 302s unless the proper harmonic balancer is installed. Not for cars with A/C.
( 2 )
$96.85
Scott Drake water pump pulleys are 2-groove steel models with a painted black finish. They are needed when adding power steering to manual steering cars, and will fit specific engines with or without air conditioning. Keep your water pump turning and circulating coolant with the help of a new Scott Drake pulley.
( 1 )
$83.75
Scott Drake engine pulley sets are available with single, double, and triple groove crankshaft pulleys. Their offerings fit late Ford engines (1965-70) with or without power steering and/or air conditioning. Scott Drake aluminum pulley sets contain a crankshaft, water pump, and alternator pulley, along with high-quality installation hardware.
( 3 )
$209.95
—
$222.95
These billet serpentine systems are easy to install, budget friendly, and styled just right. Summit serpentine belt systems start with a CNC-machined, 1/2 in. thick, 6061 T6 billet aluminum face plate, which has positive belt adjusting holes for both the alternator and A/C pump, plus beveled edges and a machined Summit logo. You also get CNC-machined 6061-T6 billet aluminum crank, water pump, alternator, power steering, and clutch cover pulleys, plus a chrome 105 or 140 Amp alternator, a chrome Sanden SD-7 A/C compressor with manifold lines (as noted), an as-cast aluminum GM Type 2 power steering pump (as noted), an as-cast GM high-flow water pump, a serpentine belt, and all the mounting hardware you need. It might look fancy, but adjustments are easy, all you need is a pinch bar and a socket wrench.
( 10 )
$2,599.99
—
$3,199.99
March Performance 1979-93 5.0L Ford pulley kits are designed for normal street driving. They reduce accessory drag, which typically creates about 12.5 HP at the rear wheels and eliminates belt throwing. These 3-piece pulley kits are available in both aluminum and steel sets. Aluminum sets are machined from 6061-T6 billet aluminum for extra strength. They are hand-polished and then covered with a "no polishing" clear powdercoated finish. They're also given a durable hard coating on the crank pulley to prevent oil seal leaks, and on the water pump pulleys to prevent premature wear. Steel sets are made from high-carbon steel, precision-machined to run perfectly true. They are coated with iron phosphate, and then given a high-gloss black polyester powdercoating for maximum rust prevention.
( 4 )
$131.99
—
$174.99
March Performance aluminum V-belt water pump pulleys are precision CNC-machined to run perfectly true. Machined from 6061-T6 aluminum for extra strength and wear, they feature a no-polishing, clear powdercoated finish. Choose from 1 or 2-groove water pump pulleys for your application. They are available in performance ratios for increased horsepower during normal street driving, and high water flow ratios for increased cooling during critical low-speed driving, to prevent overheating.
( 105 )
$107.99
—
$139.99
March Performance Ford 429-460 serpentine drive kits are precision CNC-machined from solid billet 6061 T-6 aluminum to fit perfectly and handle high-torque and vibration. They are powdercoated to eliminate polishing in those hard-to-reach places, and then hard coated in high-wear areas. These pulleys will not fracture like common cast pulleys, since high-tensile strength means much longer wear. The street rod ratio increases water flow and fan speed, which helps at critical low-speed driving.
( 11 )
$407.99
—
$948.99
Scott Drake billet aluminum power steering pump pulleys are designed to work exclusively on Ford power steering pumps. Depending on the year and engine size, Ford offered 2 different diameter pulleys, a 5 in. and 5.5 in. Be sure to measure your original pulley to get the right diameter. They are interchangeable and both will work for just about any application. The larger 5.5 in. diameter version is best suited for high-rpm operation as it will help protect the pump. The smaller 5 in. version provides more power assist at low-rpm especially idle but not ideal for racing or high-rpms.
( 6 )
$66.35
—
$68.15
Vintage Air water pump pulleys add the finishing touch to your engine compartment. Remove the guesswork—if Vintage Air says something fits, it fits. There's never any fine-tuning or modifying their components to get them to fit; just follow the instructions and enjoy the results. Don't try to align your water pump using aftermarket pulley systems; Vintage Air decided that there had to be a better way. Their machined steel or aluminum V-belt pulleys are designed to the tightest possible configuration. Versions are available for a wide variety of makes and models.
( 7 )
$138.99
Auto Specialties underdrive water pump pulleys will help to deliver more horsepower by reducing parasitic drag. These pulleys are made from durable, black nitride hardened steel and will help to reduce the wear on your car's accessories. This power-freeing modification requires only simple hand tools to install.
( 50 )
$87.99
—
$109.99
Clearance
Put some tension on your belts with Dorman automatic belt tensioners. Rigorously tested for sustained performance by a team of product and quality engineers, Dorman's automatic belt tensioner assemblies are designed to provide proper tension to vehicle serpentine belts. They incorporate a damping design, torsion spring, and sealing system to ensure the proper functioning of many integral engine components. Replace worn-out or weak parts with Dorman automatic belt tensioners. The automatic belt tensioner should be replaced whenever the serpentine belt is replaced. Features include: * Quality tests include torque testing, spring-back testing, corrosion-resistance testing, and on-vehicle testing * Solid steel or aluminum construction for long-lasting durability * Highly resistant to heat and shock * Designed to fit properly every time
( 42 )
$54.99
$23.50
—
$175.99
Billet Specialties Tru Trac serpentine systems with A/C feature easy, straightforward assembly—with no spacers or washers to fool with. The entire Tru Trac systems are designed to mount to the engine block to allow for any cylinder head/intake configuration. All hardware and fasteners are included in each kit to complete the install. Tru Trac serpentine systems with A/C include: * Powermaster 170 amp 1-wire alternator * Billet aluminum alternator fan and pulley * Edelbrock water pump * Billet aluminum water pump pulley * Billet aluminum bridge bracket * Patent-pending billet aluminum tensioner engineered specifically for each Tru Trac serpentine system * Billet aluminum tensioner pulley * Billet aluminum crankshaft pulley * Polished ARP 12-point stainless steel fasteners * Goodyear Gatorback 6-rib serpentine belt * Comprehensive installation manual * Polished Sanden SD-7 A/C compressor * Polished billet aluminum A/C compressor clutch cover * Polished billet aluminum A/C compressor manifold
( 20 )
$2,430.95
—
$3,965.95
Take up the slack with Dayco No Slack Idler pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime-lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Idler pulleys.
( 80 )
$15.99
—
$126.99
March Performance Pro-Track serpentine conversion kits are your lightweight, high-strength solution to replacing your old, unreliable V-belts. These dependable kits are simple to adjust and are a great way to get A/C into your ride. Pro-Track serpentine conversion kits feature three idlers to provide perfect belt wrap for no-slip operation. These top-quality kits are available with or without power steering. March Performance Pro-Track serpentine conversion kits are a reliable, dependable and beautiful addition to your project!
( 7 )
$1,643.99
—
$2,566.99
Need some good-looking pulleys for your street ride? You can't go wrong with Summit Racing™ water pump pulleys will help you maintain water pump efficiency with quality and style.
( 226 )
$42.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
