Availability
Showing In Stock Items. Show All 25 Items.
Classic Ford 302 stock drop-in long block crate engines from ATK High Performance are shipped to you fully dressed. These are basic stock engines with moderate horsepower and torque based off the 80-86 Ford 302 engine. These engines typically make about 240 horsepower on the dynamometer. Additional specs: * Block: seasoned OE roller block * Bore/Stroke: up to 4.060 x 3.000 * Displacement: 302 c.i.d. * Crankshaft: OE Ford cast late model crankshaft (50 oz. imbalance) * OE steel connecting rods 5.4 in. stock bolts * Pistons: hypereutectic * Piston rings: moly rings * Compression Ratio: 8.5:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: OE stock * Camshaft bearings installed and blocked to OEM position * Cylinder heads: OE cast iron * Freeze plugs: brass installed and sealed * Rocker arms: stamped steel 1.5 ratio * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. front sump * Weight: 430 lbs. * For engine break-in please follow the ATK break-in procedure that is included with the engine.
( 32 )
$3,998.99
Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 2 long block crate engines to give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 2 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * Intake manifold * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Distributor * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
( 4 )
$4,210.99
Ford Performance Parts 2018 2.3L 310 hp EcoBoost long block crate engines are designed for traditional rear drive installations. They're the same EcoBoost engine found in the 2018 Mustang and feature turbocharging, direct injection, and twin independent variable cam timing (Ti-VCT). The swap possibilities are almost endless: from early street rods, kit cars, most generations of Mustang, to just about any other vehicle build. Ford Performance Parts 2.3L 310 hp Mustang EcoBoost engine kit—this kind of performance comes standard with a dose of adrenaline! Features and items: * 310 hp and 350 lbs.-ft. torque at 3,000 rpm (with 93 octane fuel) * Production turbocharger * Starter and mounting hardware * Alternator and mounting hardware * Flywheel * Engine harness (not installed, must be used with Ford Performance control pack) * Throttle body (not installed, must be used with Ford Performance control pack) * Engine kit uses Ford Performance Parts M-6017-23T control pack (not included) for easy plug-and-play installation
( 1 )
$5,242.99
Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds
Not Yet Reviewed
$15,262.99
Bring your old car or truck back to life with ATK High Performance Ford 351W 300 hp Stage 1 long block crate engines. These engines are built by hand by true craftsmen to ensure a strong-running, reliable engine for your daily driver or hot rod. These engines come ready for you to install your choice of finishing touches, so you can get back out on the road. More product features, items, and specifications include: * Seasoned OE-style roller block (1987-95; 300 hp, 377 torque; 4.060 in. bore x 3.500 in. stroke) * OEM E7TE cast iron cylinder heads (1.77 in. intake/1.46 in. exhaust) * OE-style connecting rods and crankshaft (one-piece rear main seal; 28 oz. balance) * Hypereutectic pistons (9.1:1 compression ratio) * Hydraulic roller camshaft Camshaft ---220/224 Intake/Exhaust Duration at 0.050 in. Lift ---0.512 in. /0.512 in. Intake/Exhaust Valve Lift with Factory Rocker Arm Ratio ---112 degrees LSA (Lobe Separation Angle) * Moly-style piston rings * Timing cover * Oil pan (rear sump truck) and oil pump (Melling standard volume) * Stamped steel 1.6 ratio rocker arms
( 5 )
$3,841.99
Start with the right foundation for your Blue Oval build--start with Ford Performance Parts 363 c.i.d. Boss short block assemblies. Build a powerful 8.2 in. deck engine for your vintage muscle, street rod, Fox body, or late model Mustang by starting with the same short block used in the 500 hp Z363 crate engines. These Ford Performance Parts Boss short block assemblies take the bore out to 4.125 in. for 363 stroked cubes of power. Plus, strength from within is provided by the forged crankshaft and I-beam connecting rods. Power your next project with Ford Performance Parts 363 c.i.d. Boss short block assemblies. Additional technical specifications: * Engine type: 302 based small block Ford * Bore x stroke: 4.125 in. bore x 3.400 in. stroke * Block: Boss 4-bolt main block M-6010-BOSS302 * Piston to Deck Height: .01 in." below deck (nominal) * Crankshaft: SCAT forged steel * Connecting rods: SCAT forged steel I-beam connecting rods with floating pins and ARP bolts * Pistons: Mahle forged aluminum, 1.5mm, 1.5mm, 3.00mm rings, valve reliefs for X306, X307, Z304DA, Z304P, N351, and other inline valve Windsor cylinder heads * Pistons designed for 20 degree valve angle heads and will fit stock or most spread valve guide centerlines; 6cc valve pockets, check piston to valve clearance * Compatible with most aftermarket performance cylinder heads * Designed for M-6049-X306//X307/Z304DA/Z304P and N351 cylinder heads. Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Hydraulic roller camshaft compatible * Recommended cylinder head fasteners M-6065-BOSS head bolts or M-6014-BOSS studs depending on application * Requires head gaskets M-6051-R351 * Internally balanced; requires "0" balance flywheel and damper * High performance harmonic balancer M-6316-D302 recommended * High-volume oil pump M-6600-D2 recommended * 302 bolt pattern oil pan and timing cover * Built with all new parts * Photo and specifications may vary
( 1 )
$6,005.99
Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY
( 1 )
$11,701.99
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 73 )
$2,482.99
—
$6,224.99
Ford Performance Parts Aluminator 5.2 XS long block crate engines are the most powerful, naturally aspirated, modular engines ever built by Ford. Utilizing the technology and hardware originally developed for the Shelby GT350 Mustang, the Aluminator 5.2 XS engines have a rating of 580 hp—making them worthy successors of their previous rendition, the A50XS. They're hand-assembled with premium aftermarket components, along with unique components developed specifically for the Cobra Jet racing program. Ford Performance Parts has created a balanced combination of high-end horsepower and strong mid-range torque in the ultimate cross-plane crankshaft long blocks: the Aluminator 5.2 XS engines. Summary of Aluminator XS features and specs include: * Designed to work with 2015-17 Mustang GT electronics—custom calibration required * 580 hp * 445 lbs.-ft. torque * 5.2L 317 cu. in. * 12:1 compression ratio * Hard-anodized forged pistons with low-friction coating * Unique H-beam connecting rods with bolts * Unique Ford Performance forged steel cross-plane crankshaft * Ford Performance Shelby GT350 cylinder block * Ford Performance Shelby GT350 oil pan, featuring integrated windage and slosh baffles, as well as an integrated oil pickup * Ford Performance Cobra Jet tuned intake (will not clear production 2015-17 hood without modification) * Ford Performance dual 65mm bore throttle body * Four-valve-per-cylinder Shelby GT350 fully CNC-ported aluminum heads with roller-finger camshaft followers * Unique Ford Performance camshafts * Camshaft specifications: Intake—14mm lift/270 degrees duration, exhaust—14mm lift/270 degrees duration * Low-leak rate Variable Cam Timing (VCT) phasers * Robust primary timing chains, as used on Shelby GT350R * Ford Performance 47 lb. fuel injectors * Ford Performance M-12A227-CJ13 high-rpm pulse ring * Unique Ford Performance blue coil covers with added unique badging—only on the Aluminator 5.2XS * Ford Performance zero (0) heat-range spark plugs * Ford Performance oil filter * 200 amp alternator and Front Engine Accessory Drive (FEAD) kit, as used on the Cobra Jet race car
Not Yet Reviewed
$24,500.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
