Availability
Ford Performance Parts hydraulic roller lifters are offered as direct replacements for 302-351W production small block hydraulic roller lifters; and as high performance versions for higher rpm and severe-duty applications. The high performance hydraulic roller tappets were developed specifically for racing conditions and are recommended for performance and racing applications. Both standard and high performance hydraulic roller lifters use the production dog-bone type tie bars and retainer plate components included in M-6253-A50 hydraulic roller lifter installation kits.
( 93 )
$314.99
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 161 )
$701.50
—
$1,119.50
What's a high performance Ford without a set of Ford Performance Parts aluminum valve covers? Take your pick from cast aluminum covers with smooth, finned, and pentroof designs in a variety of polished, satin black, and powdercoated finishes. The valve covers are available in a variety of styles with an impressive array of Ford, Cobra, and Mustang logos that are sure to add an individual touch to your Ford. Features include: * Available for a wide variety of Ford engines * Baffled * May require modifications for roller rockers * Some applications will clear stud girdles and roller rocker arms * Where applicable, include oil fill cap and grommets * 1.200 in. round oil fill/PCV holes on some applications * Most are 50-state legal when installed with appropriate closed PCV hardware
( 183 )
$191.99
—
$483.99
Motorcraft oil filters are specifically designed for Ford, Lincoln, and Mercury vehicles. Each filter, including the popular Motorcraft FL-1A, uses as many as 12 high-quality components. Choose the style designed for fitment on your vehicle. Construction features include: * Steel cases: "Ironed" for a precise fit, fluted to ease removal, and painted for rust resistance * Pressure relief valve: When it's cold outside, or if the filters become clogged, oil flow through the filters can be reduced. If this happens, the relief valve opens to provide a continuous oil supply. Its design also minimizes the chance of contaminated oil recirculating back * Anti-drainback valve: This feature keeps oil in the filters to prevent "dry starts" after your engine has been turned off. It's made with specially formulated materials that resist the aging effects that an engine's heat can cause * Efficient filter media: Re-engineered media increases Motorcraft filters' dirt-collecting capabilities, allowing them to capture more engine-harming particles than ever before
( 134 )
$11.99
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 6 )
$3,617.95
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 311 )
$39.99
—
$99.99
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 54 )
$20.99
—
$234.99
Edelbrock Elite II Series valve covers are the next generation of the original Elite Series valve covers. The Elite II Series feature a design that is influenced by the Elite Series originally released in 1985, but with a new modern take on this classic look. The valve covers are made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Depending on application, Elite II valve covers are available in both stock and tall styles. Tall profile valve covers are 2 in. taller than stock and clear most roller rockers and valve train components, while the stock profile versions clear accessories like air-conditioning and alternator brackets.
( 178 )
$238.95
Some people want a chrome pan, while others want a plain-Jane bare pan. No matter which style you like, Summit Racing™ stock replacement oil pans are perfect stamped steel OEM-style replacements. Most come with a stock baffle, a stock pump location, and a drain plug.
( 966 )
$70.99
—
$81.99
Give your engine bay a custom look! Ford Performance Parts stamped steel engine valve covers are designed "tall" to clear most roller rockers. They also feature recessed Ford Racing, Cobra, or Mustang emblems with inlaid paint for a custom look. Sold in pairs, the valve covers include baffles and oil breather grommets. Choose from a chrome plated or black crinkle powdercoat finish. These are officially license Ford Racing products. Order the valve covers recommended for your vehicle and engine application.
( 14 )
$120.99
—
$145.99
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,332.95
—
$1,479.95
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 507 )
$15.99
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$11.99
—
$74.99
You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.
( 2 )
$1,687.95
—
$1,838.95
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 141 )
$518.47
—
$571.35
Summit Racing offers True Roller timing sets for a wide range of vehicles from the 1950s and up. These single- or double-roller sets have rugged true-roller chains, teamed with steel crank and cam sprockets. The crank sprockets feature multiple keyways, which allow you to set the cam timing to your choice of degrees in advanced, retarded, or normal. Order the timing set recommended for your year, make, and engine application.
( 173 )
$73.99
Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform. The kits are recommended for high-performance street and strip use. Their powerband is from 1,500 to 6,500 rpm, and they maintain 10 to 12 in. of vacuum at idle.
( 41 )
$450.95
—
$455.95
Milodon oil pans are stock replacements for factory oil pans and are perfect for your restoration projects. They're also ideal for engines that are not intended for racing and just need a new stock-style pan. These American-made pans offer an excellent fit and flat, un-warped pan rails, unlike imported pans. They feature internal baffling to keep oil in the sump and free up additional horsepower and are available for most domestic V8 engines.
( 187 )
$209.95
Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.
( 412 )
$391.99
Howards Cams double roller timing sets are hand-matched for quality and reliability. These 3-piece timing sets feature a premium double roller chain for extended life with cast iron cam sprockets. The 3-keyway crank sprockets offer a +4, 0, -4 cam adjustment.
( 10 )
$42.99
—
$49.99
Summit Racing™ offers diecast aluminum oil pans for hundreds of vehicles from the 1950s and up. These top-quality OE replacements are available in a variety of styles, sizes, and finishes. Order the model recommended for your application. (Not intended for racing purposes.)
( 65 )
$129.99
—
$247.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 135 )
$93.99
—
$119.99
PRW Pro Series stainless steel rocker arms are manufactured from lightweight, premium quality 17-4ph stainless steel—a superior alloy high in nickel and chromium. This rigid, premium material provides outstanding fatigue resistance, and high-yield strength to help resist deflection. These rocker arms feature full-cage, friction-reducing needle bearings, and extra-large trunnions to spread out the load and reduce wear. Each rocker body is hand-polished, assembled, and carefully inspected to deliver the finest quality available to the racing and performance industry. Reduce your valvetrain mass with durable, lightweight PRW Pro Series stainless steel rocker arms. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * Each set of 16 comes complete with PRW RockerLocs * Stud-mount design provides plenty of clearance for large diameter springs * CNC-machined pushrod cups * Heat-treated steel nose rollers and shafts resist severity of racing and minimize scrubbing
( 11 )
$25.44
—
$306.70
PRW Platinum Series shaft-mount rocker arm systems fulfill the needs of successful racers and performance engine builders at every level. The Performance Quotient PQx rocker arms are made from quality alloy extrusions. These systems include CNC-machined billet steel pedestals, and ground, steel alloy rocker shafts—along with PRW SCM-4135 alloy steel fasteners, studs, and bolts. PRW Platinum Series shaft-mount rocker complete kits include all the components and hardware required for a professional installation. Order the system recommended for your specific vehicle and engine size. Features, items, and specs: * Several systems to suit many cam profiles * 8 pairs of shaft-mount rockers with adjustable cup-style valve lash adjusters * SAE 42100 full complement precision needle and cage roller bearings * Rated up to 750 lbs. open spring pressure * Internal oiling system for long-lasting performance
( 10 )
$58.18
—
$779.24
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
