Availability
Showing In Stock Items. Show All 152 Items.
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 144 )
$563.55
—
$643.31
System 1 has eliminated the need for disposable oil filters. Built from durable anodized aluminum housing, System 1 filters feature a washable, stainless steel element that can be used over and over again. They can be completely disassembled for inspection, revealing metal shavings and residue that could indicate engine wear or damage. System 1 oil filters are perfect for daily drivers, fleet vehicles, and race and marine applications.
( 16 )
$190.00
—
$304.00
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 39 )
$80.28
—
$112.40
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 136 )
$162.99
—
$208.99
Lares power steering pulleys are designed to fit your OEM pulley setup. Manufactured from quality materials, and available for a wide variety of applications, each power steering pulley meets OE specifications to ensure a precise fit and proper function. Keep your steering system operating reliably, order the Lares power steering pulley in the application you need.
( 28 )
$21.99
—
$24.99
ARP Pro Series connecting rod bolts are precision CNC-machined to exacting specifications and designed for optimum reliability. They are heat-treated and threads are rolled to provide up to ten times more fatigue strength. This makes them far superior to standard OEM fasteners in terms of durability, and fully capable of handling the extra stress of high-combustion engines.
( 70 )
$179.99
Is your crankcase breather filter clogged up with oil? Replace it with a new one! Dorman steel crankcase breather filters are designed to allow for proper crankcase ventilation for more efficient filtering and air circulation.
( 1 )
$92.95
Aeroquip quick-drain oil pan couplings are great for street rides, hot rods, race cars, or anything else that you need to cleanly drain fluid from efficiently. They eliminate the potential for spillage by draining directly into a waste container and make changing your oil quick, clean, and fun.
( 9 )
$72.99
Gator Fasteners modified rock arm pedestals are machined/milled for installation of head studs in your engine. Rather than having your old stock pedestals machined to size, Gator's are ready to drop right in and get back to building that motor. Features and benefits: * No downtime waiting on the machine shop to mill your old ones * No hassle of dealing with cores * Already sized to fit head stud kits whether it be Gator or ARP brand * High-quality precise machine work * High-strength metal * Brand new, not made from old cores
Not Yet Reviewed
$219.99
PROMAXX Performance Cummins 6BT cylinder heads are designed and developed using factory Cummins 6BT castings. These replacement cylinder heads feature castings thicker than standard OE specifications in crack-prone areas for added durability. They're generously offered assembled with valves, valve seals, springs, retainers, and locks. Improve the already impressive reliability and longevity of your Cummins turbodiesel with PROMAXX Performance 6BT cylinder heads.
( 4 )
$711.00
Fluidampr Cummins full power kits are designed for use in 1989 and newer 5.9L / 6.7L Cummins performance engine builds above 700 hp and 1,250 lbs.-ft. of torque. The kits are highly recommended for drag racing and sled pulling. For applications above 3,500 rpm, use in conjunction with a Fluidampr Cummins drill pin kit. Unleash all the horsepower of your modern diesel engine with a Fluidampr Cummins full power kit. Features and items: * 1/2 in. thick torque plate with textured finish mounts between the damper face and bolts to provide a wider, stronger clamping surface * Torque plate incorporates a 5/8 in. hex head for barring the engine over * Heat-treated, high-strength extended length ARP bolts * Diamond-impregnated friction washer
Not Yet Reviewed
$230.62
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 252 )
$90.99
Hamilton Cams Cummins Tappets are solid valve lifters and are available for Cummins 24-valve and 12-valve 6-cylinder engines. They are also offered for Cummins 4BT 4-cylinder (8-valve) engines. Cast tappets for 6-cylinder engines feature a 1.450 in. diameter and do not interfere with the fuel pump eccentric on 12-valve engines. Much wider than the 1.100 in. tappets used in early 12-valve engines, their greater surface area makes them perfect replacements. These 24-valve and 12-valve tappets work well with the wider lobes of Hamilton Cams camshafts and promote much better lobe life with today's low zinc oils. For use over 5,000 rpm, with heavy valve springs, or a billet steel cam, Hamilton Cams offers 1.450 in. steel tappets. They are specially designed and manufactured to handle the higher pressures, rpm, and loads of competition use. Hamilton Cams Cummins 4BT tappets have a 1.300 in. diameter; much wider than many 4BT tappets that are only 1.10 in. These cast 1.300 in. tappets allow the pressures between the camshaft and the tappet to be spread over a significantly larger surface area to reduce lobe and lifter wear.
( 1 )
$169.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 286 )
$13.99
Summit Racing™ offers a range of diesel performance pistons in different over-sizes for your rig. These precision-manufactured parts are tough and feature skirt coatings and anodized top ring lands for long life. Order the replacement pistons recommended for your engine application.
Not Yet Reviewed
$741.99
—
$1,074.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 163 )
$18.99
—
$23.99
On Sale
Trust Fleece Performance to bring you the best OE alternative parts you need! Their replacement rocker arm assemblies are direct-fit replacements for specific Cummins engines that meet or exceed OE specifications. Service your diesel with the help of Fleece Performance.
Not Yet Reviewed
$119.99
$101.99
PRW Dodge Cummins rocker arm systems are the perfect upgrade to provide more power and run your diesel engine more efficiently. Each rocker is made from alloy steel substantially stronger than stock. PRW Cummins shaft systems are manufactured to exceed OEM specifications as a "drop in" assembly using the stock arm ratios. The upgraded rocker arm systems are complete with everything you need, from ball adjusters and fasteners, along with silicon bronze bushings instead of OEM-style needled bearings for prolonged life expectancy. Note: some applications are pre-machined for high performance cylinder head stud kits.
( 1 )
$542.77
—
$583.90
Trans-Dapt Performance remote oil filter relocation kits allow you to move your oil filter to a more accessible location, making filter changes quick and easy. They're available in single or dual filter kits. Dual filter kits double the filtration of your oil system to keep oil cleaner and add an extra quart of oil capacity.
( 79 )
$151.99
As the crankshaft flexes, the balancer absorbs incredible amounts of energy. ARP balancer bolt kits will ensure that your balancer is locked into position. They feature a 12-point head that accepts a deep socket to eliminate the fear of stripping the head.
( 625 )
$37.99
—
$44.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 318 )
$89.99
On Sale
Upgrade your Cummins valve springs and retainers with Fleece Performance spring and retainer kits. They are manufactured from "super clean" high-tensile chrome silicon steel with a proprietary multi-step heat treating process that minimizes load loss. The springs have a seat pressure of 105 lbs. with an open pressure of 195 lbs. at maximum lift. The retainers are through hardened 4140 chromoly steel and have a black oxide finish. Please note: Retainer locks are not included.
Not Yet Reviewed
$499.99
$424.99
Dorman offers replacement EGR gaskets in a variety of styles, materials, configurations, and kit contents. Exhaust gas recirculation (EGR) is actually an emissions reduction technique used in gasoline and diesel engines. The system works by recirculating a portion of the engine's exhaust gas back into the engine cylinders, diluting the oxygen and providing gases that benefit combustion. The Dorman heat-resistant gaskets seal the EGR valve where it connects to the exhaust system. Order the gasket or kit recommended for your vehicle application.
Not Yet Reviewed
$180.95
Continental Accu-Drive tensioners are designed so that the belt tension, frictional damping, and amount of belt take-up are ideal for your application. All Continental Accu-Drive automatic belt tensioners meet or exceed OEM specifications for all major car manufacturers.
( 29 )
$71.99
—
$115.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
