Availability
Showing In Stock Items. Show All 45 Items.
ACDelco Gold PCV valves are high-quality aftermarket components. The PCV (positive crankcase ventilation) valve controls the volume of crankcase vapors that are drawn into the intake manifold. A restrictive PCV valve can cause oil leaks or increase oil consumption. These replacements have been manufactured to meet or exceed your expectations for fit and performance. Order the model recommended for your vehicle.
( 38 )
$3.50
—
$8.99
Our Summit Racing™ valve cover hold-down tabs are designed to spread the fastener load over a larger area of your valve cover flange. This minimizes distortion and decreases the possibility of oil leaks.
( 41 )
$10.99
Standard Motor Products replacement PCV valves are emissions-control devices that route unburned crankcase blowby gases back into the intake manifold where they can be re-burned. By totally eliminating crankcase emissions, the constant recirculation of air through the crankcase helps to remove moisture, which would otherwise cause sludge to form. Standard Motor Products replacement PCV valves will extend the life of the oil and the engine.
( 52 )
$3.99
—
$8.99
Did you lose or damage a valve cover bolt? Chevrolet Performance has you covered with these replacement valve cover bolts. They are just like your factory originals, so you have no worries about fit or appearance--everything will be just how the engineers at Chevy intended. Chevrolet offers these replacement valve cover bolts for most of their popular engines, so finding the right one will be easy.
( 15 )
$6.99
Dress up your engine compartment while keeping oil in its place and the dirt at bay with Summit Racing™ valve cover oil fill caps. They're manufactured from high-quality material, providing a proper fit and seal to prevent oil loss. These round, steel caps are available to fit a variety of applications, including GM, Mopar, Ford, AMC, Jeep, and other make/model vehicles. Whatever your part needs, chances are Summit Racing™ has it!
( 37 )
$4.99
No more struggling to replace the grommet of your valve cover bolt. BTR valve cover fasteners are direct replacements of the stock parts, and they include the bolt and grommet. Secure your valve covers the hassle-free way with BTR replacement valve cover bolts.
Not Yet Reviewed
$4.99
MotoRad crankcase breather caps provide the oil circulation and air ventilation that your engine needs to run properly. Made from heavy-duty steel, MotoRad caps perform well under pressure. Many of these direct fit, high-quality crankcase breather caps are given a zinc plated finish for optimal rust resistance. Get replacements that perform and fit like the originals--MotoRad crankcase breather caps.
( 1 )
$4.99
—
$8.99
On Sale
Add a little pizzazz to your engine with Mr. Gasket chrome valve cover breathers. These custom chrome breathers keep your crankcase properly vented and add a little shine under the hood. Mr. Gasket valve cover breathers are available in push-on or push-in styles.
( 46 )
$11.95
—
$14.93
$7.77
—
$9.70
Trans-Dapt valve cover stud kits make your job easier. These studs assist in keeping the gasket in position during assembly. These kits include studs and serrated locknuts to make your valve cover and gasket installation hassle-free.
( 16 )
$9.99
These valve cover spreader bars from Trans-Dapt spread out to hold down pressure and ensure a leakproof fit. They match the rest of your chrome accessories and are available for a wide variety of applications.
( 31 )
$9.99
Create a positive seal with Chevrolet Performance valve cover grommets. They're precision-made to ensure a secure fit between your valve covers and breather or PCV. Get the right grommets for your GM vehicle from Chevrolet Performance Parts.
( 34 )
$2.99
—
$5.99
Despite their importance, valve cover grommets are often overlooked--and if they're not replaced in time, leaks can easily occur. Fel-Pro offers a range of quality replacement sealing solutions, including these valve cover grommets. They provide reliable, leak-free sealing to help keep your vehicle operating at peak efficiency. The Fel-Pro grommets meet or exceed OE specifications and are validated to provide accurate fit, form, and function.
( 11 )
$12.99
Nix unwanted leaks from your valve cover gaskets--use Spectre Performance valve cover hold-down tabs to keep oil where it belongs--inside your engine! These hold-downs are designed to distribute equalized clamping pressure, thus creating a better valve cover to cylinder head seal. Tight seal, less chance of leaks! Spectre's hold-down tabs are manufactured from quality steel and then triple chrome plated for durability--not to mention, their chrome finish adds a bit of bling to your engine bay area.
( 15 )
$8.99
OER valve cover PCV grommets are correct replacements for the factory originals. These grommets are manufactured to meet or exceed OE specifications, and will help keep oil leaks at bay.
( 9 )
$6.99
—
$7.99
Standard Motor is committed to manufacturing a full line of quality engine management related products to meet strict requirements for form, fit, and function, and these rubber PCV valve cover grommets are no exception. They're designed to ensure a secure fit between the valve cover and breather or PCV for a more positive seal to prevent leaks. When OE fails, trust Standard Motor for quality replacement parts with an enhanced design and superior performance.
( 17 )
$2.99
—
$5.99
ACDelco GM Genuine Parts PCV valve grommets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles.
( 4 )
$3.99
Holley LS coil offset brackets were designed to help clear high-mounted alternators when ignition coils are mounted onto Holley LS/Tall LS valve covers. These service part replacements/add-ons are for Holley LS valve covers with 72mm-spaced coil mounting provisions and 5th generation LS coil bodies only. Each assembly consists of an LS coil offset bracket and two coil mounting bolts (standard M6 x 1.0 threads, 14mm long). Gain that critical one inch (roughly) of clearance space with Holley LS coil offset brackets.
( 3 )
$6.97
MotoRad produces these oil filler caps for nearly every domestic and import vehicle on the road today. MotoRad is the leading supplier of oil filler caps for both the original equipment market and the automotive aftermarket, ensuring you of a quality product.
( 1 )
$2.99
—
$7.99
Summit Racing™ valve cover grommets are designed to control oil leakage into breather caps and keep oil from getting all over your valve covers. The baffled grommets help to eliminate oil blowby, as well. These inexpensive replacements are made to fit most stamped or diecast valve covers. Order the size and style preferred for your application.
( 157 )
$9.99
ACDelco GM Genuine Parts PCV valves are an emission control component. These valves are a GM recommended replacement for your vehicle's original part. The PCV (positive crankcase ventilation) valve controls the volume of crankcase vapors that are drawn into the intake manifold. A restrictive PCV valve can cause oil leaks or increase oil consumption. These GM Genuine Parts PCV valves have been manufactured to provide you with the same performance, durability, and service life you expect from General Motors.
( 4 )
$3.99
—
$8.99
Help deter those unwanted leaks with Dorman valve cover grommets. They're manufactured from oil-resistant rubber to be durable against severe heat and fluctuating temperatures under your hood. Plus, their beveled design ensures a secure, airtight seal. Choose the style and size designed for your vehicle application.
( 70 )
$2.99
—
$6.99
If you're looking for a nice set of valve cover hold-downs, than look no further. Proform offers these chrome valve cover hold-downs that definitely add a nice touch to your engine compartment.
( 11 )
$8.99
Metro Moulded rocker arm cover plugs are manufactured to meet and exceed OE specifications. These quality neoprene plug reproductions deliver the right fit, function, and form for your vehicle.
( 3 )
$8.99
Dorman PCV breather hoses can help maintain engine life and performance. They are direct replacements to keep your vehicle running in top form. Brittle or clogged hoses can cause emission problems. New PCV breather hoses, tubes, and elbows from Dorman are original equipment solutions designed to head off problems and prolong your positive crankcase valve's proper operation. Preserve your PCV system--install new breather hoses from Dorman.
( 27 )
$4.99
—
$7.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
