Availability
Showing In Stock Items. Show All 55 Items.
Clearance
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 135 )
$123.99
$86.50
Clearance
PRW Pro Series stainless steel rocker arms are manufactured from lightweight, premium quality 17-4ph stainless steel—a superior alloy high in nickel and chromium. This rigid, premium material provides outstanding fatigue resistance, and high-yield strength to help resist deflection. These rocker arms feature full-cage, friction-reducing needle bearings, and extra-large trunnions to spread out the load and reduce wear. Each rocker body is hand-polished, assembled, and carefully inspected to deliver the finest quality available to the racing and performance industry. Reduce your valvetrain mass with durable, lightweight PRW Pro Series stainless steel rocker arms. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * Each set of 16 comes complete with PRW RockerLocs * Stud-mount design provides plenty of clearance for large diameter springs * CNC-machined pushrod cups * Heat-treated steel nose rollers and shafts resist severity of racing and minimize scrubbing
( 9 )
$25.04
$19.50
Clearance
Why spend time and money reconditioning your stock rods—when you can upgrade to a set of Eagle SIR I-Beam connecting rods for less? They're forged from 5140 steel for outstanding strength and reliability, and they come in both press-fit and bushed pin models. Their lightweight design places less stress on the rest of your rotating assembly to increase engine life and better handle high-rpm use. The rods are X-rayed, sonic-tested, magnafluxed, and shot-peened to stress-relieve the metal. They come with 12-point ARP Wave-Lok rod bolts and are weight-matched to within two grams. The big end sizing is controlled by in-house CNC equipment to ensure precise machining and accurate fitment. Order the individual rod or set recommended for your year/make and engine application.
( 81 )
$74.99
—
$344.99
$49.50
—
$263.50
Clearance
ATK High Performance GM 383 Stroker 435 hp Stage 3 long block crate engines with EFI are designed for better driveability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 435 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Dart SHP aluminum cylinder heads * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
( 1 )
$7,098.99
$5,999.50
Clearance
These high-strength, nodular-iron street performance balancers from Pioneer offer bonded balancer technology to meet the budget of every performance street engine builder from mild to wild. They also make great heavy-duty standard replacement balancers and are perfect for limited-spec race classes, such as late model stock, that require an OE-style balancer. The bonded dampening rubber in these balancers eliminates spinning and component separation, giving reliable performance in engines using up to 6,500 rpm. All Pioneer street balancers feature easy-to-read, permanently etched timing marks on the outer ring.
( 54 )
$270.99
—
$396.99
$124.50
—
$135.50
Clearance
Trans-Dapt Performance chrome engine dress up kits are a terrific way to accessorize under the hood! Each kit contains a variety of items to get your ride show-ready. Many applications are available!
( 6 )
$149.99
$99.50
Clearance
ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs
( 45 )
$2,673.99
$1,885.50
Clearance
KB Performance Hyper piston and ring kits are offered for a wide range of applications from street and towing to marine and race. The kits feature pistons cast from 390 hypereutectic alloy heat-treated to T-6 standards to make them stronger. The pistons also feature fully machined crowns and valve pockets. KB hypereutectic pistons come in several head designs, as well as standard and oversized bore sizes. All KB Hyper pistons are lightweight to improve throttle response and rpm changes, while still being strong enough to withstand high compression and high temperatures. KB Performance Hyper kits (KT) are completed with piston ring sets containing top rings of moly-coated cast iron (M) or ductile iron (D).
( 72 )
$424.99
—
$622.99
$315.50
—
$361.50
Clearance
ACL direct replacement rod bearing sets are affordable, high-quality bearings expertly made from premium materials and engineered to match your exact requirements. They are offered in the Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. Select the set desired for your build. ACL Aluglide bi-metal bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds.
( 1 )
$33.99
—
$44.99
$16.50
—
$21.50
Clearance
If you're building up a Dart block and want the best bearings with the correct sizing, then you'll want Dart cam bearings. They're fully grooved, made from steel-backed babbit, and specifically designed for high performance use. To all of this, Dart adds their own moly-PTFE coating for even better performance and durability. This coating is approximately 0.0005 in. thick, which translates into 0.001 in. less overall clearance.
( 34 )
$25.19
$19.50
Clearance
Howards Cams rev kits are designed for roller cam applications to increase valvetrain stability throughout the rpm range. In addition to increasing rpm capabilities, these rev kits will also keep the lifter in the lifter bore in the event of valvetrain failure. The locator bars and lifter buttons are made of the highest quality aluminum and are then anodized for protection. Each of these kits comes complete with locator bars, springs, and lifter buttons.
( 6 )
$164.99
$114.50
Clearance
Mahle Original offers a variety of high-quality valve lifters for fitment on vehicle and engine applications spanning several decades. These direct replacements will restore factory-type performance in opening cylinder valves.
Not Yet Reviewed
$23.99
$10.50
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 136 )
$16.99
—
$274.99
$10.50
—
$142.50
Clearance
Offering a level of True Roller advantage for the value-racer, Cloyes upgraded the cam sprockets to feature the strength of billet steel and added critical functioning features. The billet steel durability, 9-keyway induction-hardened crank sprocket, .250 True Roller chain, and precise CNC machining together offer quality and adjustability unmatched in their class. Features include: • Billet steel cam sprocket • Induction heat-treated billet steel crank sprocket • 9 keyways allow +/- 8 degrees • Adjustability in 2 crank degree increments • True Roller chain with .250 in. diameter rollers
( 143 )
$141.99
$139.50
Clearance
Melling M-Select Class 1 camshafts are part of their full line of high performance camshafts graded from Class 1 to Class 4. Class 1 camshafts have durations of 200 to 215 degrees at .050 in. lift. They feature good idle quality with strong low-rpm torque and midrange performance. These cams will work well with stock or slightly modified engines with either manual or automatic transmissions. M-Select Class 1 camshafts may have lower vacuum than OE camshafts.
( 33 )
$155.99
$120.50
Clearance
KB Performance hypereutectic pistons are made from 390 aluminum alloy and heat-treated to T6 standards, which makes them 30 percent stronger than ordinary untreated hypereutectics. Their 100 percent CNC-machined crowns, high upper compression-ring location, gas-accumulator groove, drilled oil returns, and spiral-lock retainer grooves make these pistons outstanding for performance applications. They have a lightweight, rigid-rib skirt design that stabilizes the piston in the bore. All of this adds up to pistons that fit tighter than forged types, provide improved oil control, reduce blow-by, increase ring life, eliminate cold start-up knocking, and won't cost you an arm and a leg! Thousands of models are available—find the set and options designed for your vehicle and engine application.
( 137 )
$364.99
—
$459.99
$209.50
—
$313.50
Clearance
Money is power, and the smart money is on KB Performance Claimer piston and ring kits. These kits offer quality and high performance for the power that you need, even when you're building on a budget. Claimer pistons mix a hypereutectic alloy displaying long wear characteristics and unique thermal properties with permanent mold casting processes to produce strong but lightweight pistons for optimal racing performance. Pistons are given an anti-friction coating and supplied with Tru-Arc lock rings so that you can run full floating or press fit. Informed decisions can pay big dividends; put your money on the solid performance of KB Performance Claimer piston and ring kits.
( 12 )
$317.99
$242.50
—
$250.50
Clearance
Engine Works offers guideplates for a wide range of applications, including many Chevy and Ford engine applications from the 1950s and up. These replacements are pressed from heat-treated steel and finished in a black oxide coating. They're available in flat or raised style, in 5/16 or 3/8 in. diameter.
Not Yet Reviewed
$24.96
$15.50
Clearance
Trans-Dapt Performance Slam-Guard oil pans have a 3/16 in. thick skid plate to prevent them from bottoming out, which could puncture or severely damage the pans, causing catastrophic engine failure. These pans are available in chrome or powdercoated silver finishes.
Not Yet Reviewed
$259.99
$191.50
Clearance
Trans-Dapt Performance Asphalt Black valve covers will renew the look of your classic's engine bay. Manufactured from steel, these valve covers have a tough, powdercoat finish that will last longer, and retain its deep dark appearance much better over time. And the Asphalt Black finish will be much easier to maintain, too. Be proud to pop the hood; upgrade your beat-up, rusty, and old components with the stealthy looks of Trans-Dapt Asphalt Black valve covers.
Not Yet Reviewed
$182.99
$92.50
Clearance
High-tensile strength head bolt kits are a necessity with any performance engine build and Engine Works offers a broad selection of head bolt kits to help you complete your cylinder head installation. These head bolt kits contain strong, high-quality steel bolts with a high-tensile strength much higher than OE bolts. Order the bolt kit designed for your application needs.
Not Yet Reviewed
$42.46
$17.50
Clearance
Silv-O-Lite quality cast pistons are manufactured from cast aluminum and then machined to produce a unique diamond finish, all to exacting skirt tolerances. These OE-type pistons are heat-treated and machined for strength and durability, tighter piston-to-cylinder wall clearances, and longer piston life.
( 50 )
$174.99
—
$196.99
$112.50
—
$133.50
Clearance
The unique full body design of these Howards Cams billet aluminum rocker arms offers less flex and will withstand 800-plus lbs. of spring pressure at over .800 in. lift. These rockers are 100 percent CNC-machined and are designed for more retainer and spring clearance than most other brands. They feature needle-bearing fulcrums and roller tips, centerless ground trunnions, centerless ground pins and rollers, and thick-walled adjusting nuts.
( 44 )
$36.99
$22.50
—
$23.50
Clearance
Howards Cams OE-style performance hydraulic roller lifters are stock replacements for use in factory hydraulic roller blocks. These lifters offer the best combination for the street with reduced friction and increased torque and horsepower. They're available in various outside diameters for fitment on specific vehicle applications. Order them individually or as a set.
( 5 )
$27.99
$18.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
