Availability
Trick Flow® Track Max® hydraulic roller camshafts for small block Ford and Ford 5.0L engines are designed and dyno-tested to ensure maximum performance. These camshafts are manufactured from premium billet steel blanks that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 61 )
$349.99
—
$408.99
Trick Flow® Track Max® hydraulic roller camshafts for Ford 4.6L/5.4L 2V modular engines are designed and dyno-tested to ensure maximum performance. These camshafts are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 2 )
$465.99
—
$974.99
Trick Flow® Track Max® hydraulic roller camshafts for big block Mopar engines are designed and dyno-tested to ensure maximum performance. Track Max® camshafts are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 1 )
$520.99
Trick Flow® takes the guesswork out of choosing the right cams and valvetrain upgrades for your Ford 4.6L/5.4L 2V modular engine with these Track Max® hydraulic roller camshafts and valve spring upgrade kits. Kit number TFS-K51802001 is perfect for naturally aspirated street engines operating in the 1,500-5,000 rpm range. Kit number TFS-K51802002 has an 1,800-6,500 rpm operating range and is ideal for mild street/strip engines with power adders using a maximum of 5-6 psi of boost. Kit number TFS-K51802003 delivers strong mid-range to top-end power (up to 6,500 rpm) in extreme duty street and naturally aspirated race engines. Kit number TFS-K51802004 is Trick Flow's highest-performing modular cam kit. It is recommended for maximum duty race engines with power adders and boost pressures of 15-plus psi that operate in excess of 6,500 rpm. The kits come complete with new cams and valve springs plus chromoly retainers, valve locks, seals, 12mm bolts and washers, and installation instructions. PCM tuning is recommended for maximum performance.
( 4 )
$1,205.99
—
$1,206.99
Trick Flow® Track Max® hydraulic roller camshafts for GM LS engines are designed and dyno-tested to ensure maximum performance. These camshafts are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 38 )
$349.99
—
$415.99
Trick Flow® Track Max® camshafts for small block Chevrolet engines are designed and dyno-tested to ensure maximum performance. They are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow performance throughout the engine's powerband. Hydraulic flat tappet and hydraulic roller grinds are available.
( 12 )
$214.99
—
$424.99
Trick Flow® Track Max® camshafts for big block Chevrolet engines are designed and dyno-tested to ensure maximum performance. Track Max® camshafts are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband. Hydraulic roller and mechanical roller grinds are available.
( 1 )
$424.99
—
$474.99
Trick Flow® Track Max® camshaft and lifter kits for small block Chevrolet engines are designed and dyno-tested to ensure maximum performance. These camshafts are manufactured from heat-treated, premium blank cores and are precision-ground to exacting tolerances. Trick Flow® lifters are made from high quality materials to deliver long life and durability over tens of thousands of miles. Together, these components deliver enhanced power and proven performance throughout the engine's powerband!
( 1 )
$279.99
Trick Flow® Track Max® hydraulic roller camshafts for GM LT1 engines are designed and dyno-tested to ensure maximum performance. These camshafts are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 1 )
$626.99
These Trick Flow® cam bolts are designed for aftermarket and OE non-PI camshafts that require 12mm bolts. These cam bolts are made from quality-grade 10.9 steel with a black finish. These cam bolts are a great choice when installing aftermarket or non-PI camshafts.
( 11 )
$21.99
Get your engine back into correct timing with these Trick Flow® cam degree supplemental kit replacement parts. From magnetic bases to indicator extensions, Trick Flow® has you covered.
( 5 )
$29.99
Securely attach your overhead cam with Trick Flow® camshaft tower bolts. They are designed to fit the OEM camshaft towers and are manufactured to factory specifications, ensuring a direct fit.
Not Yet Reviewed
$40.99
Are you putting new cams in your engine? These Trick Flow® roller followers will help you get the job done right and get the most out of your cams. Featuring hardened steel construction, Trick Flow® roller followers are the perfect OE-style replacements for 4.6/5.4L 2V or 4V modular engines.
( 3 )
$14.99
—
$179.88
Trick Flow® patented hex cam gear spacers are great for holding the cam in position when you're setting the cam timing and torquing the cam gear bolts.
( 3 )
$27.99
Tuned by Trick Flow® engineers to deliver optimum horsepower and torque on a small block Ford, these kits will save you cash and take the guesswork out of building a winning engine combination. The Trick Flow® Twisted Wedge® 11R top-end engine kits are built around a set of dyno-proven Twisted Wedge® 11R 170 cylinder heads (TFS-52515301-C00). Also included is a Track Max® hydraulic roller camshaft (TFS-51403001), 1.6 ratio roller rocker arms (TFS-51400520), true roller timing chain set (TFS-51478520), chromoly pushrod set (TFS-21407050), cylinder head bolt kit (TFS-92005), and a complete engine gasket set (TFS-51400904). The test engine with these parts installed made 432 horsepower and 370 lbs.-ft. of torque on Trick Flow's® engine dyno!
( 4 )
$3,821.99
No camshaft swap is complete without a new set of lifters. Treat your engine to the "good stuff" with new Trick Flow® hydraulic lifters or lash adjusters. Featuring durable hardened steel construction, these lifters and adjusters are a must when installing new cams—and are perfect replacements for worn or ticking lifters in used engines. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods. The sets are available in a variety of fitment options for applications from 1955 and up.
( 47 )
$9.99
—
$814.99
Trick Flow® VVT delete combos are required when removing the active fuel management system on your late model Chevy Gen IV engine. They are engineered by Trick Flow® to include all of the components you will need to do the job right. And, they come available in one or 3-bolt designs.
( 14 )
$318.99
—
$319.99
If you're looking for serious street/strip performance from your one-of-a-kind custom vehicle, then these Trick Flow® PowerOval® 280 Fast As Cast® top-end engine kits for big block Chevrolet engines are just what the doctor ordered. Featuring Trick Flow® PowerOval® 280 heads with 113cc combustion chambers, these top-end engine kits were designed to give your engine the best possible components for excellent low and midrange torque and horsepower. For serious pavement-pounding power, choose these Trick Flow® PowerOval® 280 Fast As Cast® top-end engine kits for big block Chevrolet. Top end kits include: * 2 Trick Flow® PowerOval® 280 cylinder heads * Trick Flow® Track Max® hydraulic roller camshaft with 0.600 in. of intake and exhaust valve lift * Hydraulic roller lifters * Chromoly pushrods * Roller rocker arms with a 1.7 ratio * Billet steel timing set * Cylinder head bolts * Gasket set
( 3 )
$5,063.90
Carefully tuned by Trick Flow® engineers to deliver optimum horsepower and torque on a big block Mopar 440, these PowerPort top-end engine kits save you cash and take the guesswork out of designing a winning engine combo. Each kit is built around a set of dyno-proven PowerPort 240 cylinder heads and includes a Track Max® hydraulic roller camshaft, a Track Heat® intake manifold, 1.6 ratio roller rocker arms with shafts and hold-down bolts, MLS head gaskets, a cylinder head bolt kit, and an intake gasket set with valley pan.
Not Yet Reviewed
$5,379.90
Trick Flow® replacement timing gears are designed from high quality materials for performance 2 V modular engines. Since they're interference engines, timing component wear can ruin your day. That's why Trick Flow® has engineered these replacement timing gears to keep your engine running smoothly.
( 5 )
$84.99
These Trick Flow Cylinder Head Replacement Components are here to help, if you should ever need to repair your cylinder heads. These parts are designed for Trick Flow Heads only!
( 2 )
$192.99
Trick Flow® valve spring upgrade kits include everything that you need to install a high performance cam. The kits contain valve springs with dampers, chromoly retainers, valve seals, locks, spring shims, and a spring height gauge. Instructions are also included.
( 66 )
$176.99
—
$252.99
Twisted Wedge® 11R 227 cylinder heads represent Trick Flow's ultimate development of the Twisted Wedge® innovation, featuring Trick Flow's most efficient combustion chamber design. The combustion chamber and valve layout move the intake valves away from the cylinder walls to reduce valve shrouding, significantly improving flow at higher lift. Shallow 11° intake/13° exhaust valve angles improve piston-to-valve clearance for high lift cams and reduce chamber volume for improved compression and efficiency. High velocity runners are optimized on the flow bench and dyno proven to outperform the competition on hydraulic roller camshaft engines. Premium materials and components, along with world-class CNC processes, guarantee uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. Machined castings increase strength and have a billet-like appearance. Additional features include CNC-profiled combustion chambers, 2.080"/1.600" stainless steel intake/exhaust valves, Trick Flow® by PAC Racing valve springs, and titanium retainers. Twisted Wedge® 11R 227 heads have CNC Competition Ported runners with a premium high- resolution finish for ultimate performance. Cylinder heads are available fully assembled or as bare castings. Sold individually. Key Features: • 227cc intake ports and 56cc or 66cc combustion chambers • 2.080 in. stainless steel intake valves • 1.600 in. stainless steel exhaust valves • .625" thick deck • Titanium retainers • 11 degree intake valve angle • 13 degree exhaust valve angle
Not Yet Reviewed
$1,524.99
Trick Flow engineers used the best features of OEM GM LS3 and LS7 cylinder heads, combined with their own race-winning engineering and technology, to create the GenX® 255—the ultimate ultimate square port LS cylinder head for 4.000" and larger bore engines. The heads feature fully CNC Competition Ported runners with a premium high resolution surface finish for maximum airflow and performance potential. Stock LS3 ports accommodate LS3-style intake manifolds and LS9/LSA blower assemblies. The valve angles have been changed from 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head deck were redesigned to work with all LS head gasket and engine block combinations. GenX 255 heads are available with standard or 6-bolt per cylinder mounting patterns. Trick Flow GenX 255 cylinder heads are emissions-legal under CARB E.O. #D-747 for 2007-present GM vehicles with 6.2L engines. They are available fully assembled or as bare castings. Sold individually.
( 7 )
$1,149.99
—
$1,599.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
