Availability
These Trick Flow® cam bolts are designed for aftermarket and OE non-PI camshafts that require 12mm bolts. These cam bolts are made from quality-grade 10.9 steel with a black finish. These cam bolts are a great choice when installing aftermarket or non-PI camshafts.
( 11 )
$21.99
Are you looking for a head bolt reducer bushing for your Trick Flow® heads? Then you need a set of these Trick Flow® head bolt bushings. If your block uses a smaller diameter bolt than your head does, then one of these is what you need.
( 19 )
$4.99
—
$59.99
Get consistent cylinder head clamping force from the cylinder head experts! Trick Flow® cylinder head bolt kits are made from premium-quality alloy steel with cold-formed hex heads and rolled threads and have a black oxide finish (except as noted). Each kit contains all of the hardware that you need to mount a pair of heads, including hardened washers.
( 50 )
$59.99
—
$197.99
Trick Flow® 8mm timing cover bolt and stud kits are designed for Ford 4.6L/5.4L 2V applications. These bolt and stud kits allow you to maintain your factory accessory mounting when used with Trick Flow® Twisted Wedge® 185/195 Series cylinder heads on modular engines originally equipped with 10mm bolts and studs.
( 3 )
$80.99
Securely attach your overhead cam with Trick Flow® camshaft tower bolts. They are designed to fit the OEM camshaft towers and are manufactured to factory specifications, ensuring a direct fit.
Not Yet Reviewed
$40.99
These Trick Flow® valve cover bolts not only keep your valve covers securely fastened, but they also do it with great style. They're made of high-quality grade steel and have a black oxide finish to offer up lasting performance and stylish good looks.
( 3 )
$13.99
—
$27.99
These Trick Flow® A460 18-bolt cylinder head fastener conversion kits include the necessary parts to complete the installation of A460 18-bolt cylinder heads. They feature a black oxide finish that protects them from wear and corrosion. These Trick Flow® A460 18-bolt cylinder head fastener conversion kits include the following components: * Eight 7/16 in. x 0.660 in. washers * Eight 7/16 in. x 0.813 in. washers * Eight 7/16 in.-20 NF 12-point nuts * Eight 7/16 in. x 2.500 in. studs * Eight 7/16 in. x 1.750 in. 12-point bolts
( 1 )
$66.99
No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 21 )
$849.99
—
$874.99
Trick Flow® GenX® 260 square port cylinder heads for GM LS7 are the best choice for your LS-based performance build for several reasons. The A356-T6 aluminum castings feature more material for increased rigidity and strength. Factory LS7 port locations, valve angles, and valve locations have been maintained to work with existing intakes and pistons. One-piece modular, 2024-T4 billet aluminum rocker arm mounts enhance valvetrain stability and are removable for shaft rocker setups. High flow, high velocity CNC Competition Ported runners with the premium high resolution surface finish provide all-out air flow and performance throughout the entire powerband. Plus there's clearance for 3/8" pushrods and through-deck coolant holes that fit all GM LS gasket and block combinations, Trick-Alloy™ powdered metal valve guides, and solid stem valves. Fully assembled heads also include Trick Flow® by PAC Racing Pacaloy valve springs, steel or titanium spring retainers, die forged steel valve locks, and stainless steel valves. Trick Flow® GenX® 260 cylinder heads are emissions-legal under CARB E.O. D-747 for 2006 to present GM vehicles with 7.0L engines. They are available fully assembled or as bare castings and sold individually.
( 2 )
$1,149.99
—
$1,599.99
Trick Flow® Super 23® 175 cylinder heads deliver performance that far exceeds the power capabilities of factory heads on 283-350 c.i.d. small block Chevy engines. It starts with the small cross section Fast as Cast® runners. They promote excellent port velocity for increased low end torque and have a profile that provides excellent flow for making high RPM horsepower on small bore engines. Modern CNC-profiled chambers promote combustion efficiency to maximize power with less ignition timing, reducing the potential for detonation. The result is more power and torque, better drivability, and greater throttle response from your street performance engine. The features don't end there. Trick Flow® Super 23® 175 cylinder heads have improved A356-T61 castings with 3/4" thick decks for added strength and durability. They also have a competition multi-angle valve job, angled spark plugs, and raised valve cover rails for improved rocker clearance and less potential for oil leaks. Heads are available assembled with premium components including stainless steel valves, bronze guides, 7° machined locks, chromoly retainers, and your choice of PAC Racing valve springs for flat tappet or hydraulic roller cams. Trick Flow® Super 23® 175 heads accept most original accessories. They are emissions-legal under CARB E.O. #D-747-1 for 1995 and earlier GM vehicles with Chevy 262–350 engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 1 )
$899.99
Trick Flow engineers used the best features of OEM GM LS3 and LS7 cylinder heads, combined with their own race-winning engineering and technology, to create the GenX® 255—the ultimate ultimate square port LS cylinder head for 4.000" and larger bore engines. The heads feature fully CNC Competition Ported runners with a premium high resolution surface finish for maximum airflow and performance potential. Stock LS3 ports accommodate LS3-style intake manifolds and LS9/LSA blower assemblies. The valve angles have been changed from 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head deck were redesigned to work with all LS head gasket and engine block combinations. GenX 255 heads are available with standard or 6-bolt per cylinder mounting patterns. Trick Flow GenX 255 cylinder heads are emissions-legal under CARB E.O. #D-747 for 2007-present GM vehicles with 6.2L engines. They are available fully assembled or as bare castings. Sold individually.
( 7 )
$1,149.99
—
$1,749.99
Trick Flow® main stud girdles will strengthen Ford's factory 2-bolt main cap assemblies. Crafted from tool steel and finished with black oxide, these girdles come with main cap bolts and a provision for an oil pump pickup tube hold-down. Tie your Ford caps together for better performance with main cap girdles from Trick Flow®.
( 13 )
$214.99
—
$258.99
Trick Flow® VVT delete combos are required when removing the active fuel management system on your late model Chevy Gen IV engine. They are engineered by Trick Flow® to include all of the components you will need to do the job right. And, they come available in one or 3-bolt designs.
( 14 )
$318.99
—
$319.99
If you're looking for serious street/strip performance from your one-of-a-kind custom vehicle, then these Trick Flow® PowerOval® 280 Fast As Cast® top-end engine kits for big block Chevrolet engines are just what the doctor ordered. Featuring Trick Flow® PowerOval® 280 heads with 113cc combustion chambers, these top-end engine kits were designed to give your engine the best possible components for excellent low and midrange torque and horsepower. For serious pavement-pounding power, choose these Trick Flow® PowerOval® 280 Fast As Cast® top-end engine kits for big block Chevrolet. Top end kits include: * 2 Trick Flow® PowerOval® 280 cylinder heads * Trick Flow® Track Max® hydraulic roller camshaft with 0.600 in. of intake and exhaust valve lift * Hydraulic roller lifters * Chromoly pushrods * Roller rocker arms with a 1.7 ratio * Billet steel timing set * Cylinder head bolts * Gasket set
( 3 )
$5,063.90
Trick Flow® potent PowerPort® A460 360 cylinder heads for Ford 429/460 are ideal for use in drag racing, monster trucks, tractor pulling, and other ultra-high power, large cubic inch engine combinations. The heads have CNC Competition Ported runners with Trick Flow® top-of-the-line, premium high resolution surface finish for maximum airflow and performance in all-out naturally aspirated or forced induction applications. Other features include big block Chevrolet-style exhaust port openings and a heavy duty 18-bolt mounting pattern for superior gasket retention. Trick Flow® PowerPort A460 360 cylinder heads are available fully assembled or as bare castings and are sold individually.
( 2 )
$1,699.99
—
$2,349.99
Build the ultimate classic-looking hi-po Chevy small block with Trick Flow® DHC™ 200 cylinder heads. Patterned after Trick Flow's popular DHC™ 175 as-cast heads, DHC™ 200 heads get the full CNC-ported treatment to substantially ramp up power production. New 64cc CNC-profiled combustion chambers with 2.055 in. intake valves and CNC Street Ported runners promote big increases in high-RPM horsepower and torque. Bronze alloy valve guides, ductile iron valve seats, and stainless steel valves ensure excellent durability, while proprietary valve profiles and multi-angle valve seat machining maximize flow at low lift. Extra thick decks and walls increase casting strength for peace of mind in demanding conditions. Chromoly steel retainers, 7-degree machined steel valve locks, factory intake and exhaust port locations, and your choice of Trick Flow by PAC Racing valve springs are also standard. As with all Trick Flow® cylinder heads, DHC™ 200 heads are cast from A356-T61 aluminum to keep weight low. To preserve the vintage theme, exterior touches like straight spark plug holes, castings with or without accessory bolt holes, and other OE double hump head styling cues deliver the traditional look you're going for. Sold individually.
( 1 )
$949.99
—
$1,274.99
Trick Flow's potent PowerPort® A460 340 cylinder heads for Ford 429/460 are ideal for use in drag racing, monster trucks, tractor pulling, and other ultra-high power, large cubic inch engine combinations. Fast As Cast® runners precisely duplicate the port shape and profile of CNC-ported heads, delivering near-CNC-ported airflow, power, and performance for about the same price as regular cast cylinder heads. Other features include big block Chevrolet-style exhaust port openings and bolt pattern and your choice of standard or heavy duty 18-bolt mounting patterns. Trick Flow PowerPort A460 340 cylinder heads are available fully assembled or as bare castings. Sold individually.
Not Yet Reviewed
$1,224.99
—
$1,749.99
These Trick Flow® valve cover spacers give you the clearance you need to run shaft mount roller rocker arms on your Chevrolet LS1 engine. They are made of aluminum, are 1/2 in. thick, and include the longer bolts and thicker gaskets for installation.
Not Yet Reviewed
$274.99
These Trick Flow® valve cover adapters allow you to run early-style valve covers with your late model Chevrolet's centerbolt heads. Plus, the adapters give you the option of running a stud girdle to increase valvetrain stability and improve overall performance. The adapters come with all necessary hardware and gaskets.
( 5 )
$148.99
Trick Flow® cast aluminum valve covers not only look great, but they also eliminate the distortion, cracking, and oil leaking issues of the factory plastic valve covers. And that’s not all. There’s also a baffled PCV valve connector plus baffled and threaded fresh air connections for supercharged and turbocharged engines. The valve cover kits fit all Ford 4.6L/5.4L 2V engines with left- or right-side oil fill. Includes valve covers, OE-style gaskets, bolts, bolt seals, and two filler caps.
( 3 )
$256.99
You made an investment with some cool looking Trick Flow® fabricated aluminum valve covers for your ride, so why skimp on the installation hardware? These Trick Flow® valve cover accessory kits are the appropriate attaching hardware for ensuring a correct installation. They will also add the perfect finishing touch to your engine compartment. These kits offer up great performance along with great style.
( 1 )
$35.99
—
$81.99
Trick Flow® fabricated aluminum valve covers allow you to reduce engine weight without sacrificing performance. These tall-height covers clear roller rocker arms and rocker stud girdles. They include new mounting hardware to ensure a correct installation. The valve covers are ideal for a variety of Chevy applications from 1965 and up.
Not Yet Reviewed
$561.99
Trick Flow® billet steel timing sets will provide accurate, reliable timing thanks to the billet steel gears and a double roller timing chain. They come with a 3-position or 9-position keyway that allows you to run the cam straight-up, retarded, or advanced.
( 21 )
$151.99
—
$155.99
Trick Flow® main cap fastener replacement hardware kits are available for a variety of small and big block applications from the early 1960s and up. The 2-bolt mains are offered in bolt and stud (with nut) styles, and in standard hex and extended hex head style, all with washers included. These kits are intended for use with Trick Flow® main cap girdles. Order the hardware needed for your year/make and engine.
Not Yet Reviewed
$50.99
—
$73.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
