Availability
With S&S Cycle's wide selection of Harley-Davidson® parts, you're sure to find the parts you're looking for, including head bolt kits. These kits include steel 12-point head bolts and washers that are designed to exceed the needs of your high performance engine.
Not Yet Reviewed
$20.99
—
$137.66
S&S Cycle billet oil pumps are designed and built for your V-Twin. They feature a smoother design from beautiful strong billet and pressure relief towers that are .300 in. shorter than your OEM oil pump. Kits may include: * Pump with cover * Mounting bolts * Supply and return gears * Driveshaft with keys and snap rings * Check ball and spring * Pressure relief valve and spring * Check ball and release valve cover screws with O-rings * Miscellaneous hose fittings, plugs, screws, and gaskets
Not Yet Reviewed
$395.06
—
$398.66
S&S Cycle offers several Super Stock cylinder heads to choose from for your motorcycle. They feature premium valves and high flowing ports to supply your engine with plenty of air, as well as high performance valve springs that may allow installation of cams with up to .650 in. of lift (depending upon cylinder heads chosen). Super Stock cylinder heads are also available in different finishes. Select the ones designed for your bike.
Not Yet Reviewed
$1,428.26
—
$1,999.95
S&S Cycle Late Twin cam chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. They're available for a variety of Harley-Davidson© street bikes from 2006 and up. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,079.96
—
$1,854.86
S&S Cycle Early Twin Cam chain drive camshaft kits are an affordable way to increase performance. These kits allow you to reuse many stock cam drive components, saving you money on parts. Complete kits include the cams, gear cover gasket, cam bearings, and instructions. Go with the less expense and more performance of S&S Cycle Early Twin Cam chain drive camshaft kits.
Not Yet Reviewed
$377.06
—
$386.96
S&S Cycle Late Twin Cam Easy Start chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Easy Start kits allow the stock starter to start any engine regardless of compression ratio! Order the kit recommended for your particular Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Easy Atart chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,955.66
—
$2,529.95
On top of being constructed from superior materials, S&S Cycle's Evolution cylinders have thicker castings, larger cooling fins, and better wear resistance than stock cylinders. The design, finish and workmanship of these replacements corresponds to the stock counterparts that they replace. The cylinders feature ductile cast-iron sleeves in aluminum castings and are available in natural or black powdercoat finish to match OEM components. Individual cylinders and cylinder sets without pistons are bored slightly under size and are not honed, so they may be finish-honed to fit your pistons. Select the cylinders designed to fit your specific Harley-Davidson® model.
Not Yet Reviewed
$815.95
—
$1,499.95
Easily installed, easily removed--S&S Cycle Quickee adjustable pushrods are designed for a simple, trouble-free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! Innovative Quickees feature threaded adjusters that screw into the pushrods until the threads disengage and the adjuster simply slides into the pushrods, making your installation or removal easy. Then, once the pushrods are installed and adjusted, the locknut keeps the adjuster from moving. They will work with stock and aftermarket cams, as well as stock pushrod covers. S&S proven performance makes life easier with their Quickee adjustable pushrods.
( 1 )
$188.96
—
$303.26
S&S Cycle cylinder studs are the perfect replacement for your OEM or S&S cases. These steel head studs are black oxide coated and strong enough to use on the largest of V-twin engines. So next time you do a top end on your Harley-Davidson®, update those head studs with S&S cylinder studs.
Not Yet Reviewed
$46.99
—
$58.99
For stock or high performance, S&S hydraulic tappets offer significant design improvements to withstand the forces, reduce the stress, and solve the possibility of oil starvation. S&S hydraulic tappets feature larger inner bearing races, an improved inner race-roller design, a redesigned and stronger plunger assembly, and revised metering devices for precise oil delivery control. Each lifter body and plunger assembly is hand-fit and then pressure-tested to insure correct operation. Choose the better features of S&S hydraulic tappets for better performance.
Not Yet Reviewed
$199.95
—
$368.96
S&S Cycle offers non-adjustable pushrods for a wide range of Harley-Davidson Big Twin street bikes from the 1940s, '50s, '60s, '70s, and '80s. * Details for 1948-52 models: S&S solid lifter pushrod set for 1948-52 panhead engines. Converts stock 1948-52 valvetrain to solid lifter operation by replacing stock pushrods, which contain built-in hydraulic units with solid non-adjustable S&S pushrods. Requires stock 1948-52 style adjustable lifters. Includes four non-adjustable steel pushrods. Fits stock 74 in. engines with 5.330 in. cylinder length. Pushrods only. * Details for 1966-84 HD models: Non-adjustable pushrod kit. Requires 1948-'2 style adjustable lifters. Includes four non-adjustable steel pushrods. (Pushrods are identical to those used in kit P/N 93-4068.) Recommended for all shovelhead and shovelhead top/panhead bottom engines with 1948-52 style lifters. Fits stock 5.330 in. cylinders.
Not Yet Reviewed
$101.95
Tap into the power of your Milwaukee 8 engine by installing an S&S Cycle camshaft. These kits will increase the torque and horsepower of your bike. They include all required gaskets, O-rings, bearings, and hardware. Order the model recommended for your Harley-Davidson® application.
Not Yet Reviewed
$211.46
—
$2,193.95
S&S Cycle standard forged rocker arms are designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller arms are available in the stock 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$294.26
S&S Cycle 110 in. Power Packages are the ideal combination of performance and savings to transform your Twin Cam HD without breaking the bank. Bump the early Twin Cam from late 96ci or 103ci to 110ci, as well as add matched cams/cam plate/oil pump and everything else a high performance cam chest needs to reliably make big power. Features: * 4 in. bore bolt on cylinder and piston kit * 10.5:1 compression * Wrinkle black finish * S&S 585 Easy Start cams in either gear or chain version * TC3 oil pump * TC3 cam plate * S&S cam chain tensioners or outer cam drive gears * Quickee adjustable pushrods with tubes * S&S precision tappets * Low-friction ductile cast iron liner * Bolts in with no machining, balancing, or splitting the crankcases * Cylinders fit to pistons--no machining required * All parts required to upgrade to gear drive cam or hydraulic tensioners in one easy to order part number
Not Yet Reviewed
$2,992.95
—
$3,121.16
S&S Cycle offers you superior valve train control for your motorcycle with their cam chain tensioners. They provide a thicker shoe, a larger piston, direct chain oiling, and tighter tolerances for improved stability and longer wear life over the stock cam chain tensioners. Order the S&S cam chain tensioners designed for your bike.
Not Yet Reviewed
$94.46
—
$157.46
S&S Cycle precision tappets are high performance replacements for S&S Cycle's previous standard and premium lifters for M8, Twin Cams, and late Sportster applications. Each precision tappet is hand assembled to exacting tolerances and designed for quiet operation and rapid pump up. Features and benefits: * Reduced valve train noise from start-up to shut down * Close tolerances for low leak-down rates * Fast pump up and superior high-rpm performance
Not Yet Reviewed
$251.96
S&S Cycle Super Stock cylinder head kits feature stock-appearing cylinder heads with improved performance. These heads work well with engines of stock displacement but are ideal for engines with a little larger stroke or bore. They are compatible with stock rocker boxes, intake manifolds, and exhaust. The S&S high-performance valve springs allow for camshafts with larger lifts. Super Stock aluminum cylinder head kits are available in multiple finishes depending on application and they contain all the parts needed for installation except where noted.
Not Yet Reviewed
$1,398.56
—
$1,999.95
S&S Cycle Super Stock alternator-style crankcases are perfect for stock replacement and high performance applications. Available in stock and different bore sizes, some are machined for the installation of a crank position sensor, but all are compatible with stock flywheel assemblies, primary covers, gear covers, and are clearanced for 38 amp alternator stators. Certain options may include the required hardware, fittings, and bearings, and may be offered in different finishes. Select the S&S Super Stock alternator-style crankcase designed for your motorcycle's engine.
Not Yet Reviewed
$1,456.16
—
$1,899.95
S&S Cycle 107 in. big bore kits are easy to install and require no machining or re-balancing. These are the largest bores that can be fit in your stock engine case. This is the largest bore that can be fit in a stock engine case. Stock engine height is maintained so there are no manifold or frame fitment issues. Using an 11-fin design, the pre-finished cylinders closely resemble the OEM shape and are ready to install. Take your stock engine case as big as it'll go with S&S Cycle 107 in. big bore kits! Product features include: * CP pistons feature a 3cc pop-up dome for slightly higher compression * Cylinders feature an increased fin area for better heat dissipation * Centrifugal cast gray liner features 40,000 psi tensile strength for superior wear and performance
Not Yet Reviewed
$1,175.36
S&S Cycle breather reed valve assemblies improve oil scavenging and reduce oil carryover. Plus, they'll make your bike run better. The steel breather reeds of these valve assemblies are normally closed. As they open and close again during the stroke cycle, a slight vacuum is maintained in the crankcase, greatly improving oil scavenging. Enjoy your riding experience even more after you install S&S Cycle breather reed valve assemblies.
Not Yet Reviewed
$147.56
S&S Cycle standard adjustable pushrods help to assure consistent valvetrain operation under all conditions. The pushrods are made from rigid chromoly steel tubing and offer a simple, trouble-free installation. You can purchase just the pushrods or as a set with pushrod covers, O-rings, and cover keepers. Replace the stock, non-adjustable pushrods in your stock or high performance application with S&S Cycle standard adjustable pushrods, available for a wide range of Harley-Davidson® bikes from 1984 and up.
( 1 )
$137.66
—
$279.95
S&S tappet cuffs capture the tappets without impacting vertical motion and keeping them perfectly aligned, even in high-stress, high-rpm situations. Factory tappet guides are constructed of plastic and are at risk for allowing the tappets to twist under heavy stress. S&S Cycle tappet cuffs offer proven performance as they're made from billet aluminum and are more durable than your old, stock plastic guides.
Not Yet Reviewed
$76.46
S&S Cycle TC3 oil pump and cam plate kits are designed to deliver increased oil pressure and return scavenge volumes over your factory oil pump while providing increased rigidity and a pressure relief valve. The TC3 oil pump features three stages for consistent oil pressure, plus reliable scavenging, and the TC3 cam plate includes removable passage plugs for easy service. S&S Cycle TC3 oil pump and cam plate kit features include: * Precision CNC-machined forged aluminum * Adjustable oil pressure regulator adjusts without removing the plate from engine * Screens and magnetic traps help protect the scavenge rotors from debris * Special design allows S&S pumps to tolerate more pinion shaft runout without damage
Not Yet Reviewed
$753.26
S&S Cycle roller rocker arms were designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller rocker arms are available in 1.500:1 ratio, 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$550.76
—
$587.66
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
