Availability
Built for racers and engine builders who craved the performance, Moroso racing vacuum pumps are manufactured from billet aluminum and feature a precision-machined shaft, rotor, and bearings that will withstand the rigors of racing. They work by producing high crankcase vacuum, which increases power by improving ring seal, preventing blowby, and detonation. Allowing the use of lower-tension piston rings for less friction. These positive pumps are much more consistent and effective than header-mounted evacuation systems.
( 5 )
$625.82
—
$1,446.99
Moroso drag race oil pans are available for hundreds of vehicle-specific applications. The sizes and configurations are built for easy installation and optimum performance. Our selection includes a variety of styles, materials, and fluid capacities for drag racing, street and strip, and road race usage. Order the replacement model designed for your ride.
( 57 )
$428.65
—
$1,932.99
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 75 )
$22.61
—
$32.99
Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.
( 412 )
$185.99
—
$1,801.99
Why run an inferior cast performance oil pump when you can run Moroso billet aluminum Professional gerotor oil pumps? The pumps use the same gerotor technology that they have used in their dry sump oil pumps for over twenty years. They're designed and tested with leading engine builders and offer features such as dual feed inlets for superior oil flow, an adjustable by-pass, a Hard-Coat finish for durability. Other features include a precision machined 6061-T6 billet aluminum body with a mounting boss cross section that's 5.7 times that of a stock pump to eliminate vibration and fatigue failures. The pumps are recommended for use with all tolerance high horsepower engines using any rod combination, including aluminum. They're supplied with a mounting stud and intermediate shaft.
( 3 )
$843.99
Looking for a great Pro Eliminator oil pan? Look no further than Moroso. These oil pans feature: * Partitioned and louvered windage tray with baffles to divide mains; separates oil quickly from rotating assembly for ultimate oil control and maximum horsepower gain * Billet end caps with extremely close tolerances * Innovative pro sump design baffling system prevents oil from climbing pan walls, keeping oil contained in the pickup area during hard acceleration and braking * Maximum-size double kickouts collect oil thrown from the rotating assembly, reducing windage and increasing power * Two -8 AN drains and an oil pump access bung allow oil pressure adjustment on pumps with adjustable bypasses * Removable plugs with O-ring seal provide convenient access to pan mounting bolts * Bolt holes are relocated to avoid interference with rods, allowing longer strokes (requires drilling and tapping of block pan rail on some blocks)
( 7 )
$992.50
Moroso offers a variety of wet sump baffled oil pans for road racing, drag racing, street and strip, and Circle Track applications. They're available for a variety of year/make and engine applications. Control your vital lubricant in extreme driving situations with a replacement or upgrade Moroso wet sump baffled oil pan.
( 22 )
$514.99
—
$910.99
Moroso billet aluminum spur gear oil pumps feature special anti-cavitation slots, feeder grooves, and an enlarged bypass area that is machined into the housing to bleed oil back to the inlet side of the pump. They combine to offer a smooth and consistent flow of oil, which improves the pumps' overall performance, extends engine life, and places an even loading on the distributor shaft to eliminate spark scatter. Manufactured using a proprietary casting process offering superior durability and reliability, the pump body and cover assembly are made to exact design specifications, while the gear and inner rotor shaft assemblies are matched to maintain absolute minimum clearances and provide maximum volumetric efficiency.
( 11 )
$554.99
—
$766.99
Moroso drag/road racing oil pans are made with thick, precision laser-cut steel rails, and feature a 7 quart capacity that moves oil away from your rotating assembly, offering excellent oil control and horsepower savings. The pans' race-proven diamond shape, four trap door assembly, and anti-slosh baffles keep your oil contained in the oil pump pickup area during road and drag racing. Moroso drag/road race oil pans have a billet aluminum adapter with a 1/4 in. NPT sensor port that allows a 13/16th thread Moroso or OEM filter to be mounted in the stock location--no need to run a remote oil filter. These pans use a stock dipstick.
( 39 )
$475.99
—
$1,264.99
Moroso PCV air/oil separators will help increase your engine's performance. These air/oil separators will capture excess oil and keep it out of your intake tract so that your engine will breathe cleaner intake air--better air equals better performance. Moroso offers universal and custom fit versions in small and large body sizes. The large bodies, besides having more capacity, feature a bottom drain with an elbow that makes draining the collected oil virtually mess-free. Their polished billet aluminum bodies can be chromed, painted, or powdercoated. The small units offer a 2-piece body that unscrews for draining and are available raw or with polished or anodized finishes.
( 326 )
$187.75
—
$495.99
Moroso main cap girdles for Ford are designed to fit 289-302 c.i.d. engines using a 2-bolt main block. They are manufactured from 1/2 in. thick steel and can fit over main caps without the need for additional spacers. The girdles include all necessary mounting hardware and will fit standard high-volume oil pumps.
( 10 )
$334.99
Moroso LS swap oil pan kits include anti-slosh baffle, oil pickup, required sealing gaskets and O-rings, as well as mounting hardware. The cast aluminum pans offer a 6-qt. capacity, feature an integral 22mm spin-on oil filter provision with oil cooler port ideal for use with a Moroso or OEM equivalent filter, and are compatible with LS car application dipsticks.
Not Yet Reviewed
$254.99
These Moroso dry sump oil tanks are designed to separate air quickly from the oil, prevent foaming and ensuring a continuous supply of oil to the pump under all racing conditions. As oil enters the tank, it rotates around the tank wall and de-aerates by spreading over a large surface area, allowing trapped air bubbles to dissipate quickly. This then lets the restored oil flow easily to the bottom outlet of the tank, where it can return to the pump and engine. The oil tanks are supplied with or without integral filtered breather tanks, and all have carefully engineered inlet locations with -AN fittings, large diameter billet aluminum screw-on filler caps, and drain plugs. They are made of aluminum and are TIG-welded for the ultimate in durability.
( 3 )
$806.99
—
$924.99
Moroso vacuum pump/dry sump pump drive kits are designed to accommodate almost any race engine combination. These steel mandrels bolt directly onto the hub or balancer to provide rigid pulley mounting.
( 19 )
$240.99
—
$425.99
Moroso has done it again with these alternator and vacuum pump mounting bracket kits. They feature two separate mounts incorporated into one billet aluminum frame, with belt adjustment for both the alternator and the vacuum pump. Specifically designed for use with an electric water pump, the Moroso alternator and vacuum pump mounting bracket kits eliminate the need for any other types of bracketry. They come available for Moroso, CSR Performance, and Meziere electric water pumps. All mounting hardware and spacers are included, so they will install with most old and new-style drive mandrel kits.
( 2 )
$423.99
—
$524.99
Moroso Ultra-Pro aluminum Pro Modified oil pans have all of the features and designs that you need for your high-horsepower engine. They have a removable bottom section that provides quick, between-rounds access to inspect main bearings and replace pistons without removing the entire oil pan. The removable section uses a machined channel, which accommodates a reusable square O-ring rubber gasket to provide leak-free sealing. The Moroso Ultra-Pro aluminum Pro Modified oil pans are box-style, all-aluminum pans featuring a maximum-size power kickout, a unidirectional windage tray screen, a block-high crankshaft scraper, and internal baffling. Designed for 2-piece rear main seal Donovan-style big block Chevrolet engines, Moroso Ultra-Pro aluminum Pro Modified oil pans give you the strength, reliability, and access that you need for your engine.
( 1 )
$1,435.97
—
$2,181.99
Moroso remote oil filter mounts give you the freedom to mount your oil filter in an easier place to access. They are made of cast aluminum and feature a center port that can be used for an oil pressure or temperature gauge.
( 18 )
$71.99
—
$195.99
Moroso V-belt crankshaft pulleys are CNC-machined from billet aluminum with a hard-coat anodized finish. They're designed to fit any 1 in. diameter crank-driven mandrel with 1/8 in. x 1/8 in keyway. Moroso V-belt crankshaft pulleys are available in 2.5 in. and 4 in. diameters.
( 5 )
$60.99
—
$96.99
Moroso vacuum pump service kits furnish various parts you need to rebuild your pump. These kits are available for the original-style, as well as the new, enhanced version pumps—and are available for both 3- and 4-vane vacuum pump applications.
( 4 )
$100.99
—
$264.99
Moroso's blueprinted racing oil pumps feature anti-cavitation slots and enlarged feeder grooves that are ball-milled smooth, providing steady oil flow to each side of the gears for high-rpm lubrication. They feature a Parkerized coating that retains oil for extra lubrication during break-in and cold starts. The included intermediate shafts are manufactured from SAE 4150 chromoly steel, with a slot drive for positive engagement and to withstand high-rpm operation. Each pump is individually tested to ensure proper functionality.
( 3 )
$356.99
Moroso truck oil pans are made from the finest steel and aluminum available. Each pan is jig-welded and block-fit to minimize warpage and ensure proper fit and sealing. Before leaving Moroso's factory, each pan is leak-tested for the ultimate in quality control. Pans are available for street and off-road use, and are built with extra strength for unsurpassed durability.
( 4 )
$193.99
—
$636.99
Racers who use the latest cylinder heads or want a unique look for their engines—or both—can now find quality, lightweight aluminum valve covers at an affordable price. These Moroso fabricated aluminum valve covers have thick billet rails for superior gasket sealing and resistance to warping. They mount through tubes welded directly to the valve covers—to help maintain gasket-rail flatness and prevent leaks. The covers feature a tall design that will clear all rocker combinations, as well as stud girdles. Some models have built-in oilers to keep valve springs cooler in oval track racing. Order the model designed for your vehicle and engine application.
( 24 )
$477.99
—
$1,526.99
Designed for a simple, bolt-on installation, Moroso oil pump and pickup kits include the pickup factory-welded to the oil pump. The pickups' wire mesh screen traps debris without restricting flow, and their orientation ensures an optimum 1/4 in. clearance from the bottom of the oil pan, eliminating timely measuring, aligning, and welding.
( 52 )
$160.99
—
$220.99
Moroso vacuum pump air/oil separators are used as remote separators and filters on vacuum pump systems. They're designed to be plumbed between your valve cover and the inlet side of your vacuum pump. These separator tanks are made from aluminum and feature a natural finish with a Moroso decal. The universal separators feature internal baffling with mesh media. The O-ringed drain bung and is made from billet aluminum that can be polished, chromed, or powdercoated. Custom or universal, Moroso vacuum pump air/oil separators will work efficiently to increase engine performance.
( 4 )
$177.99
—
$235.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
