Availability
Moroso replacement weld-in nipple fittings are designed for the crankcase evacuation kits. They are made of steel and can be welded into any header collector.
( 5 )
$22.99
Moroso filtered fitting screen kits will do the job of effectively eliminating metal and debris from your oiling system.
Not Yet Reviewed
$105.99
Built for racers and engine builders who craved the performance, Moroso racing vacuum pumps are manufactured from billet aluminum and feature a precision-machined shaft, rotor, and bearings that will withstand the rigors of racing. They work by producing high crankcase vacuum, which increases power by improving ring seal, preventing blowby, and detonation. Allowing the use of lower-tension piston rings for less friction. These positive pumps are much more consistent and effective than header-mounted evacuation systems.
( 5 )
$785.99
—
$1,446.99
Automotive oil preheaters allow your engine to start more quickly and reach optimal operating temperature faster, minimizing wear on internal engine components and improving fuel efficiency. Moroso offers internal and self-contained style oil preheaters. Each one features an element designed specifically for heating oil and will not scorch or boil the oil like "converted water heater" designs. Select the one to best suit your needs. Self-contained oil preheaters feature: * 400 watts of power, 110 to 120 V rating * Heating element length: 4 3/4 in. from fitting to tip * Aluminum and steel -12AN bungs or aluminum 1/2 in.-14 NPT weld-in bungs * 3 ft. cord included Internal oil preheaters feature: * 212 watts of power--raises temperature of 12 quarts of oil 60 degrees F in about 30 minutes * Element screws into place * Available with aluminum or steel 1 in. NPT fitting * 120 V rating * Detachable 7-foot cord included * Heating element length: 4 1/2 in. from fitting to tip
( 2 )
$116.99
—
$155.99
Moroso breather tanks are great for low vacuum venting. They're offered in a choice of sizes to suit your application needs, and may be modified for additional fitting for dual vent hoses. These high-strength, lightweight aluminum breather tanks feature a 2 in. breather filter mounted on top and an aluminum bottom drain fitting and ball valve.
( 110 )
$57.99
—
$278.99
Moroso vacuum pump regulators are manufactured from 6061 billet aluminum and have a smooth finish to add a bit of dress-up under the hood. The valves can be disassembled for easy cleaning, and will work with any vacuum level. The vacuum relief point is adjustable by shimming an internal spring to get the amount of vacuum desired.
( 1 )
$230.99
Moroso vacuum pump air/oil separators are used as remote separators and filters on vacuum pump systems. They're designed to be plumbed between your valve cover and the inlet side of your vacuum pump. These separator tanks are made from aluminum and feature a natural finish with a Moroso decal. The universal separators feature internal baffling with mesh media. The O-ringed drain bung and is made from billet aluminum that can be polished, chromed, or powdercoated. Custom or universal, Moroso vacuum pump air/oil separators will work efficiently to increase engine performance.
( 4 )
$235.99
Moroso evacuation system valve cover adapter fittings are designed for the crankcase evacuation kits. They provide an easy way of adding a -12AN male fitting to OEM GM LS engines with an oil fill bung in the valve cover. Just remove the oil fill bung, screw in the fitting and tighten down with built-in hex nut.
( 1 )
$83.99
Racers who use the latest cylinder heads or want a unique look for their engines—or both—can now find quality, lightweight aluminum valve covers at an affordable price. These Moroso fabricated aluminum valve covers have thick billet rails for superior gasket sealing and resistance to warping. They mount through tubes welded directly to the valve covers—to help maintain gasket-rail flatness and prevent leaks. The covers feature a tall design that will clear all rocker combinations, as well as stud girdles. Some models have built-in oilers to keep valve springs cooler in oval track racing. Order the model designed for your vehicle and engine application.
( 27 )
$722.99
—
$784.99
Moroso separator tank replacement parts are high-quality parts designed to improve the performance of your separator tank, as well as the overall performance of your vehicle. Whatever you need for your separator tank, Moroso has you covered.
Not Yet Reviewed
$17.99
These Moroso dry sump oil tanks are designed to separate air quickly from the oil, prevent foaming and ensuring a continuous supply of oil to the pump under all racing conditions. As oil enters the tank, it rotates around the tank wall and de-aerates by spreading over a large surface area, allowing trapped air bubbles to dissipate quickly. This then lets the restored oil flow easily to the bottom outlet of the tank, where it can return to the pump and engine. The oil tanks are supplied with or without integral filtered breather tanks, and all have carefully engineered inlet locations with -AN fittings, large diameter billet aluminum screw-on filler caps, and drain plugs. They are made of aluminum and are TIG-welded for the ultimate in durability.
( 3 )
$653.99
—
$924.99
Moroso dry sump breather tanks allow a place for air to escape to the atmosphere. They're designed to be used as a remote breather and oil separator on dry sump tanks and rear axle housings. They have -12AN fittings to simplify plumbing, can be mounted to any panel with included mounting straps, and come complete with a filtered breather and draincock. A perfect companion for Moroso's Racing vacuum pumps or dry sumps, these tanks are all-aluminum and lightweight.
( 3 )
$146.99
—
$505.99
Moroso sandwich oil filter adapters are designed to eliminate the need for a remote filter will still allowing a remote oil cooler or accumulator. The adapter mounts to the spin-on oil filter pocket on the engine and has an oil filter pocket built into the bottom. The ports allow oil to run to a remote cooler or an accumulator without the need of relocating the oil filter. Best of all, the Moroso sandwich oil filter adapters can be clocked so the fittings are where they need to be for maximum clearance.
( 17 )
$110.99
—
$145.99
Moroso remote oil filter adapters are designed to plumb remote oil filters and oil coolers. The fitting direction is adjustable for the best clearance.
( 12 )
$108.99
—
$169.99
Moroso offers external oil pump pickup kits for aluminum wet sump pans. These complete kits contain everything needed to convert an aluminum wet sump oil pan for use with an external oil pump. They include a 7 in. long billet aluminum slotted pickup tube, mounting foot, and removable/cleanable filtered male to male O-ring fitting (multiple sizes available). The kits also make a convenient way to an extra pickup to an aluminum dry sump oil pan. Moroso pickups adapt to a variety of oil pans; welding is required.
Not Yet Reviewed
$132.99
Control the oil with Moroso valve cover baffle kits. These no-weld kits provide an easy way of adding a female AN fitting to steel or aluminum valve cover. And since there isn't any welding required, there is not the possibility of heat damage to the chrome or powdercoat finishes of your valve covers. Moroso valve cover baffle kits include hardware and O-ring, and are available in -8AN, -10AN, and -12AN female fittings.
Not Yet Reviewed
$48.99
—
$55.99
Moroso oil filter block-off plates are designed for use with the Moroso dry sump oiling system or external oil pump. They are drilled and tapped to accept a 1/2 in. NPT fitting to provide increased clearance for installing an input pressure line. Mounting hardware and O-rings are included.
Not Yet Reviewed
$54.99
—
$92.99
True racing parts from Moroso! Oil filter aluminum bypass plates replace the engine-mounted oil filter in wet sump oiling systems and direct the oil to a remote oil filter or oil cooler. They're drilled and tapped for -10 AN O-ring inlet and outlet fittings, and include all mounting hardware, gaskets, and an O-ring.
( 3 )
$45.99
—
$103.99
Moroso replacement electric drive water pump pulleys are universal fitting, direct replacement pulleys for Moroso electric water pump drive kits. They are made from black plastic and intended for drag race applications only.
( 1 )
$38.99
Moroso large-diameter remote oil filter mounts feature a compact, low-profile design that facilitates installation in crowded areas. They are manufactured from 6061-T6 billet aluminum and are anodized blue to resist corrosion. The mounts include two screw-in adapters to cover most large-diameter style oil filters. They use -12 AN inlet and outlet threaded fittings that are positioned vertically to improve laminar flow.
Not Yet Reviewed
$179.99
These Moroso oil preheater cords are replacements for Moroso oil preheater internal aluminum fittings. Moroso is one of the world's most respected suppliers of automotive equipment for racing and street performance applications. If you're looking for a dependable oil preheater cord, Moroso is the place to go.
Not Yet Reviewed
$32.99
Moroso's universal dipstick kits are designed to work with Moroso and other brands of oil pans with a built-in 1/4 in. NPT dipstick provision. Moroso dipsticks feature a universal mounting tab that can be bent or modified to accommodate a wide variety of engine compartment clearances and mounting locations. The dipstick seals to the tube with an O-ring that secures it in place and prevents crankcase gasses from escaping. Moroso universal dipsticks also feature "full" and "fill" marks which can be used as-is, or new marks can be added to indicate your desired engine oil level.
( 86 )
$80.99
Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.
( 417 )
$289.99
—
$1,331.99
Moroso drag race oil pans are available for hundreds of vehicle-specific applications. The sizes and configurations are built for easy installation and optimum performance. Our selection includes a variety of styles, materials, and fluid capacities for drag racing, street and strip, and road race usage. Order the replacement model designed for your ride.
( 58 )
$471.99
—
$1,153.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
