Availability
Milodon oil pump rebuild kits are designed to keep your oil pump operating properly. They include all necessary parts to overhaul your pump. Milodon oil pump rebuild kits are available for Mopar Hemi and big block engines.
( 1 )
$52.95
Milodon windage tray stud kits are required to mount a windage tray assembly correctly. The adjustable mounting feature allows you to position the tray as closely as possible to the rotating assembly (minimum 1/10 in.), so the tray can work at its maximum potential. You can also adjust your tray to avoid interference with the oil pan (special torquing requirements apply, and the tray must lie naturally flat after positioning nuts are torqued). These fasteners are available individually or in larger quantities, and are designed for fitment on a wide range of make/model engine applications.
( 39 )
$27.95
—
$114.95
These Milodon LS & Gen III oil filter relocation kits allow you to choose a new spot to mount your oil filter. They include two 36 in. hoses that can handle a working pressure of 250 psi, and aluminum AN-style fittings for a leak-free connection. Designed specifically to fit late model Chevy V8 engines, the Milodon LS & Gen III oil filter relocation kits make moving your oil filter easy.
( 3 )
$250.95
Milodon lifter valley screen kits provide inexpensive insurance for small block and big block Chevy racing engines--especially for dry sump applications. Designed to prevent broken parts from falling into the oil pan or pump and causing serious engine damage, these stainless steel screens affix to the old drainback holes located in the valley area of Chevy engines. The kits include instructions and epoxy.
( 8 )
$33.95
Make your oil filter more accessible with Milodon remote oil filter kits. They allow you to install your filter in any location for a more convenient setup and easier maintenance. Milodon remote filter kits feature race-quality components for reliable, leakproof performance.
( 6 )
$219.95
Milodon timing gear drive hardware kits are the right components for proper service. These replacement bolt packs are offered for all of their gear drives. Milodon gear drives are designed for "all out competition", but work equally well in any application. So when service is necessary, choose genuine Milodon parts and hardware kits to maintain the performance you've come to expect.
Not Yet Reviewed
$45.95
Milodon timing gear drive conversion kits are designed to change your existing Milodon gear drive assembly from a carbureted-style with no cam drive capability … to an injected/blown-style with a cam-driven hex. Kits include the cam hub, a secondary cam cover, all mounting bolts, and a camshaft end play control device. Why buy a new gear drive, when a Milodon conversion kit can enable your gear drive to work the way you need it to. Order the model recommended for your year/make and engine application.
Not Yet Reviewed
$175.95
Milodon complete engine bolt kits are available with and without headbolts—and include the fasteners that you need to build a high performance engine, in one convenient box. You get carb studs, intake bolts, valve cover studs, timing cover bolts, a Grade 8 balancer bolt, water pump bolts, and header bolts. Also included are oil pan bolts, water neck bolts, fuel pump bolts, and distributor bolts. Order the kit recommended for your engine application. Features include: * Where applicable, race-quality 170,000 psi headbolts with reduced-size 1/2 in. hex head allow for easy head bolt re-torquing without excessive valvetrain interference * Carb and valve cover studs have thread starter nose to allow for easy assembly * Intake and header bolts use a reduced size 3/8 in. head to allow for greater access when tightening * Timing cover and pan bolts have serrated washer faces to resist loosening, even with initial engine startup gasket shrinkage * Water pump bolts for Chevys include both long and short water pump bolt sets; water pump and timing cover bolts for Ford 302 engines include all 19 bolts required * Balancer bolts are Grade 8 and include a heavy-duty washer and locking washer
( 4 )
$117.95
—
$144.95
Milodon freeze plugs will not rot out, like lower cost steel ones. Your new engine assembly deserves the best. Don't get stuck trying to replace a leaking steel freeze plug behind a motor mount a year or two from now. Milodon freeze plug kits include all of the necessary external block freeze plugs, and cam and oil galley plugs for one complete engine.
( 48 )
$19.95
—
$55.95
Milodon oil pan bolt kits were specially designed to firmly hold oil pans in place and not loosen up. They feature a built-in washer face with case-hardened serrations. The washer face and small head permit the use of a socket wrench for quick and accurate installation. They can be reused time and time again.
( 63 )
$12.95
—
$19.95
Milodon oil pan stud kits are undoubtedly the best choice for attaching your Milodon oil pan. They include heat-treated studs with rolled threads and special nuts with built-in serrated washer faces. These kits provide easy pan installation and prolonged gasket life, and their special serrated nuts guard against pan loosening during operation.
( 30 )
$27.95
—
$45.95
Milodon offers these valve cover stud kits for both universal and vehicle-specific applications. They're available in a variety of thread sizes, lengths, and quantities. The steel studs come with hex nuts for easy installation.
( 23 )
$15.95
—
$36.95
Increased oil capacity and oil control are an absolute must to handle the demands of higher rpm and increased horsepower. Milodon Gen III Hemi oil pan kits are engineered with internal baffling that can free up additional horsepower. They have a 6 qt. capacity--a necessity for high-volume oil pumps and increased rpm ranges, and these "golden" steel pans include windage tray, pickup, gaskets, and hardware. Select the oil pan kit with the proper sump location for your setup.
Not Yet Reviewed
$489.95
Milodon oil pump stud kits are a must for high performance and racing engines. Centerless ground from 8740 chromoly steel, they feature rolled and heat-treated threads, a ground washer, and a Grade 8 nut.
( 2 )
$12.95
Milodon main stud kits are required where maximum gasket loading and minimal wear and tear are exerted on the block threads. These engine studs are premium-grade, race-quality studs that are created from aircraft-quality 8740 chromoly steel right in Milodon's own plant. They are ground and thread-rolled after heat treatment to ensure the exacting tolerances that Milodon requires for all of their fasteners. This ensures strength and consistent torque readings. The tensile strength of these premium fasteners is 190,000 psi, which is more than adequate for the most demanding applications. All kits come complete with 4130 heat-treated, parallel-ground washers and high-strength nuts.
( 20 )
$74.95
—
$209.95
Milodon premium-grade bolts are forged from 8740 chromoly steel. They are ground and thread-rolled after heat-treatment to ensure exacting tolerances. These bolts feature a 1/2 in. hex head for greater socket clearance, a wide flange area under the head for greater load spread, and a black oxide finish.
Not Yet Reviewed
$234.95
Milodon Vac-U-Pan systems are a highly effective method of achieving optimum power through significantly reducing oil pressures. The breather of the units attaches to the valve cover and the probe is inserted into the header. Exhaust scavenging pulls pressure and blowby out of the motor. These complete kits include breathers, check valves, and weld-in nipples.
( 16 )
$80.95
Ideal for street and strip applications, Milodon windage trays are specially contoured for a good fit. They permit rapid oil return and protection from oil splash-back, while providing increased power. They are available in either a solid design with louvers or a high-tech screen design.
( 96 )
$46.95
—
$102.95
Milodon external oil systems allow for the bypassing of irregular and restrictive stock internal oil passages. They also allow for the placement of the pickup in an optimum position, plus the use of free-flowing braided line. These kits are available with static or swivel pickups with single or dual lines, and with oil pumps with different levels of output. They provide the optimum in oiling for all types of competition and come complete with all necessary bolts, fittings, O-rings, etc., for installation. A Milodon oil pan, windage tray and oil pump drive shaft will complete the package. In some cases, notching the frame is required.
( 4 )
$579.95
Milodon head studs are required where maximum gasket loading and minimal wear and tear are exerted on the block threads. They are premium-grade and race-quality, created from aircraft-quality 8740 chromoly steel right in Milodon's own plant. These studs are ground and thread-rolled after heat treatment to ensure the exacting tolerances that Milodon requires for all of their fasteners. This ensures strength and consistent torque readings. The tensile strength of these premium fasteners is 190,000 psi, which is more than adequate for the most demanding applications. All kits come complete with 4130 heat-treated, parallel-ground washers and high-strength nuts. These studs are available for dozens of specific cylinder head style applications.
( 11 )
$122.95
—
$367.95
Swap out your leaky stock timing chain cover with one of these stylish, high-quality Milodon timing covers. CNC-machined from quality steel, each timing cover is precision-checked for the proper placement of the seal and dowel pins to avoid leaks and to ensure an exact fit. Order the model you need.
( 106 )
$69.95
Milodon locking cam plate and bolt sets will prevent loosening during operation. They're a low cost investment to prevent potential damage.
( 1 )
$7.95
These Milodon stainless steel oil dipsticks are CNC-machined from billet stainless steel to stay bright and rust-free. All dipsticks feature an O-ring seal top and bottom to positively seal against water & dirt. The braided stainless steel hose will flex around headers, tube mounts, and anything else in the way.
( 180 )
$92.95
—
$95.95
Milodon aftermarket main bearing caps not only strengthen factory 2-bolt blocks, but they will also add a measurable degree of strength to 4-bolt blocks. They are made from precision-machined, high-strength steel, which has the proper balance of strength and flexibility to allow for the transfer of increased shock loads to the crank and bearings. The secret is in the side bolts. They are angled so that they pull from the side walls of the block and not from the flimsy main web area. They'll also load the cap against the register step, which will prevent dreaded "cap walk." They can be installed by anyone with a hand drill and a tap and they come with the necessary bolts, washers, and drill bushing to complete the installation. Milodon main cap kits are available in your choice of angled or straight bolts.
( 20 )
$119.95
—
$459.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
