Availability
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 153 )
$14.95
—
$215.95
COMP Cams Xtreme Energy DLC hydraulic flat tappet lifters are quality yet inexpensive performance-proven lifters available in hydraulic and solid for multiple applications. These tappets feature a Diamond-Like Coating (DLC) face that forms an extremely hard, tough, and high-lubricity surface to reduce friction at the cam lobe/lifter interface, extending lifter and camshaft life significantly. The lifters maintain the excellent performance expected of a COMP product and are available for Chevrolet, Buick, Cadillac, Pontiac, Oldsmobile, Ford, Chrysler, and AMC applications requiring flat tappets. Additional details: * DLC: Diamond-Like Carbon * Wear-resistant * High lubricity * Cast-iron and steel camshaft compatible * Outstanding performance in Spintron durability testing simulation of an entire racing season * Excellent alternative to hard-to-find standard lifters
( 1 )
$7.95
—
$112.95
COMP Cams NSR Stage 1 HRT hydraulic roller camshaft and lifter kits are designed for a substantial bolt-in power increase. They help you avoid costly breakdowns and early retirement of your Hemi engine by maintaining Spintron-proven valvetrain stability high into the rpm range. These cams provide great throttle response, mid-range torque and excellent power; they're perfect for heavier vehicles. Each kit includes everything needed, such as lifters, valve springs, push rods, and seals. Order the model recommended for your application. Wake up that late model Hemi engine and go with the proven a COMP Cams NSR Stage 1 HRT hydraulic roller camshaft and lifter kit.
( 1 )
$1,839.95
In today's higher rpm engines, the tip of the valve stem is subjected to a tremendous pounding. The best solution to this problem is COMP Cams' lash caps. These hardened lash caps are precision-machined and ground perfectly flat, to maintain accurate valvetrain adjustment.
( 30 )
$8.95
—
$80.95
COMP Cams NSR drift hydraulic roller camshafts are designed for substantial bolt-in power increase—over 90 hp in some applications! They help you avoid costly breakdowns and early retirement of your LS engine by maintaining Spintron-proven valvetrain stability up to 7,500 rpm. These cams provide great throttle response, and may be the best possible drop-in cam for your budget 5.3L drift, road race, or drag build. Make 'em eat your dust with COMP Cams NSR drift hydraulic roller camshafts.
( 2 )
$541.95
COMP Cams hydraulic lifters have a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special, powdered-metal iron alloy and heat-treated for strength and wear resistance. These lifters are produced with a longer piston than conventional hydraulic lifters. The extra length is made possible from a counter-bored pushrod seat position. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity.
( 7 )
$15.95
—
$125.95
Summit Bucks
COMP Cams Chrysler Hemi phaser camshafts utilize Variable Valve Timing (VVT) technology to maximize power and performance in stock and street/strip applications. The new Hemi engines from Chrysler are great power plants straight from the factory, with technology that allows the camshafts to move in real time. Instead of scrapping this advanced system, COMP Cams has embraced it with a new line of aftermarket Hemi-specific cams. The patent-pending Hemi phaser camshafts work with phaser limiters or locks to fully utilize Chrysler's Variable Valve Timing (VVT) technology, which allows them to pick up torque in the low end of the engine, while maintaining power up high. Made from a billet core, these hydraulic roller cams are engineered tough enough to handle 5.7L and 6.4L Hemi street/strip engines. Their unique, no-springs-required design maintains piston-to-valve clearance, while enabling high performance lobes utilizing VVT, making them perfect for late model Dodge Challengers, Dodge Chargers, Chrysler 300s, Jeeps, Dodge trucks, and Mopar crate engines with VVT. COMP Cams Chrysler Hemi phaser camshafts are available as both custom and three different off-the-shelf grinds, dependent upon engine type, for improved performance over OEM options. They will require the COMP Cams phaser limiter or lock kits to limit the degree of maximum cam phasing to 14 crank degrees (7 cam degrees) and they are available separately.
( 5 )
$605.95
COMP Cams Godzilla hydraulic roller camshaft upgrades are designed to provide amazing drivability and throttle response, while producing increased torque across the entire RPM range with a significant horsepower bump with minimal effort. They're available in three distinct models: * Stage 1 NSR/NTR model: Utilizes the full phaser sweep for excellent mileage and optimized performance, without compromising durability. They requires no adjustment to the factory cam phasing or ignition timing without the need for a limiter. However, minimal ECU tuning may be required to meet the maximum potential. Testing with an optimized tune resulted in over 60 hp and 15 lbs.-ft. over stock with a much broader torque curve—impressive gains with minimal effort and zero compromise. * Stage 2 NSR model: Maintaining use of the phaser with a limiter kit allows these camshafts to also produce incredible horsepower. They offer maximum torque in the low- to mid-range for heavy vehicles and towing. Stage 2 cams deliver an increase of over 75 lbs.-ft. of torque at 3,000 rpm! They require a phaser limiter (P/N 5473). Testing with the phaser limiter kit resulted in gains of more than 75 hp over stock. One look at the torque curve produced by this camshaft will have your tires crying for mercy. * Stage 3 model: Godzilla Stage 3 camshafts are made for crate engines and engine swaps into lighter vehicles and those seeking maximum horsepower while still utilizing the phaser with a limiter kit. These cams bring the exhaust note that is worthy of the Godzilla name. They will produce well over 600 hp on pump gas! Awesome power can be expected, from 5,000 to 6,700 rpm with the valve spring kit (P/N 7230GCS-KIT) and a phaser limiter (P/N 5473). Testing with the phaser limiter kit resulted in gains of nearly 100 hp and 25 lbs.-ft. over stock. This much horsepower will make even Godzilla fly.
Not Yet Reviewed
$677.95
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. When ultimate strength is required, as with high-rpm roller cam applications, Hi-Tech Race studs are just what you need. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. All COMP Cams Hi-Tech studs have generous radii and feature a black oxide finish.
( 23 )
$11.95
—
$136.95
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. The Magnum series studs work well in applications with moderate lifts and spring pressures. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. COMP Cams studs have generous radii and feature a black oxide finish.
( 24 )
$11.95
—
$129.95
The new COMP Cams DLC High Energy hydraulic lifters perform mechanically just as COMP's well-known High Energy line, but with the added benefit of a DLC surface treatment. This produces a flat tappet lifters with an extremely hard, tough, and slick face that reduces friction at the cam lobe. The unique coating extends the life of the lifter and camshaft, significantly reducing the likelihood of a flattened cam lobe. Additionally, COMP Cams DLC High Energy hydraulic lifters virtually eliminate the need for the traditional break-in procedure associated with cast iron camshafts and flat tappet lifters. They maintain the excellent hydraulic performance that the High Energy Hydraulic Lifters have provided for many years.
Not Yet Reviewed
$10.99
The COMP Cams XFI SPR Ford 4.6L/5.4L modular 3V (Springs & Phaser Mods Required) camshafts are the best way to achieve the most power and torque increases possible with the popular Ford Modular 3V engine. These designs are the next step up from the COMP Cams VSR (Valve Springs Required) cams. When compared to the VSR cams, the SPR cams offer additional mid-rpm power increases as well as substantial power gains in the higher rpm ranges. In addition to increases in horsepower, you can also expect another 800-1000 rpm of useable engine speed and an awesome sounding idle lope to match. To achieve this extra level of performance, lobe profiles and timing events were specifically designed to work with the factory variable cam timing (VCT) system cam phasers for all 2005 and newer Ford Modular 3V engines. These cam phasers were modified with the required COMP Cams Cam Phaser Limiter kit to restrict their movement to no more than 20 degrees. This simple modification gains additional piston to valve clearance, allowing for much larger cam designs. This results in cams that not only maintain low and mid-range power, but have incredible high rpm performance as well, all while maintaining the benefits of cam phasing. As noted by the COMP Cams engineering staff during extensive dyno testing, these camshafts provided the biggest power and torque improvements of any cam series they've ever tested in the Ford Modular 3V engine.
( 1 )
$1,028.95
The right cam choice can make the difference between a bike that performs well or fails to perform. COMP Cams provides the ultimate in arm-stretching, white knuckle power in both street and competitive applications with their Evolution Xtreme Energy hydraulic roller camshafts. COMP Cams pays particular attention to ramp design to keep the cams as quiet as possible and lobe design to maintain as wide a power band as possible.
Not Yet Reviewed
$205.95
COMP Cams oval track camshafts are designed specifically for racing applications. They are available to complement a variety of engine configurations, track lengths, and conditions--simply order the model that fits the needs of your particular make and model. Before you start the next oval track race, install the winning camshaft edge from COMP Cams.
( 19 )
$342.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
