Availability
The industry-leading camshaft designers at COMP Cams set out to engineer a camshaft specifically for the requirements of open wheel modified racers. They had to take on the daunting task of building maximum horsepower, while still taking into consideration the tire restrictions, chassis technology, engine combinations, and common rule packages found in open wheel modified racing sanctioning bodies, such as IMCA. The Open Wheel Modified Traction Control Camshaft Series is comprised of 10 solid flat tappet and mechanical roller grinds for small block Chevys. These powerful camshafts are separated into four categories, each of which is optimized for open wheel modified racing. A combination of proven camshaft design technologies and the most innovative and aggressive lobe profiles in the industry has produced camshafts that deliver an extremely wide powerband, pulling hard off the corner and all the way down the straightaway. A further benefit of the broad horsepower curve of these cams is that they minimize tire spin, creating legal traction control. These innovative grinds have been extensively track-tested, and they have been proven to run faster than any camshaft that has ever been tested for this type of racing. COMP Cams OWM T/C Series offers a cam for just about every open wheel modified racer.
Not Yet Reviewed
$341.95
—
$574.95
On Sale
COMP Cams computer-controlled camshafts are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these cams will fit your engine's needs.
( 47 )
$288.95
$231.16
—
$549.95
COMP Cams computer-controlled cam and lifter kits are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these kits will fit your engine's needs.
( 9 )
$587.95
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 203 )
$45.95
—
$622.95
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 12 )
$40.95
—
$726.95
COMP Cams introduces another industry first with their Max-Lift BSR shaft rocker systems, a bolt-in bushed shaft rocker system that increases valve train stiffness helping your engine achieve higher levels of performance. By tying all eight rocker arms together on a single shaft that fits in the stock rocker stand, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection under extreme loads. The increased valve train stiffness created the BSR rocker system allows your existing cam to act like a larger camshaft by transferring more of the motion to the valve or the use of more aggressive, higher lift cams without losing control of the valve train. Take complete control of your valves with the COMP Cams Max-Lift BSR shaft rocker system.
( 3 )
$731.95
—
$883.95
These COMP Cams adjustable phaser lock kits are easily adjustable and allocate locking over the OEM 50 degree phaser range. They allow you the use of larger, more aggressive aftermarket camshafts and are extremely durable. If you're looking for a way to gain more precise centerline control at high rpm under extreme conditions, then these high-quality adjustable phaser lock kits by COMP Cams will do the trick.
( 1 )
$131.95
Even with a thrust button, most stock stamped front covers flex under pressure, causing erratic ignition timing. COMP Cams 2-piece billet aluminum timing covers are strong and rigid enough to eliminate this flexing problem, hold your cam in place, and keep your timing in control. Endplay adjustment is made easy, thanks to an access hole for the dial indicator. Plus, the 2-piece design allows your camshaft to be replaced without disturbing the oil pan seal, making for a much more user-friendly unit.
( 16 )
$319.99
—
$338.99
COMP Cams camshaft phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm. The engine oil is pressure fed to the phasers through passageways in the cylinder heads and cams. The engine computer's control solenoids that adjust this oil flow into and out of the phasers' control chambers, give the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap.
( 2 )
$120.95
Comp Cams cam phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm Engine oil is pressure-fed to the phasers through passageways in the cylinder heads and cams. The engine computers control solenoids that adjust this oil flow into and out of the phasers' control chambers, creating the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap. COMP Cams cam phaser limiter kits restrict the range of cam timing movement (14 degrees for Chrysler, 20 degrees for Ford, and 22 degrees for GM), thus providing the necessary valve clearance for serious performance cams with tighter lobe separations--all while utilizing the benefits of VVT technology. Gain some serious upper rpm power without sacrificing bottom end or mid-range performance with Comp Cams cam phaser limiter kits.
( 6 )
$82.95
—
$281.95
COMP Cams 3-piece billet aluminum timing covers not only look good, but they work good, too. Save time and the hassle of breaking the oil pan seal when you need to change or adjust your timing chain or belt. Even with a thrust button, most stock stamped front covers flex under pressure, causing erratic ignition timing. These covers feature a rigid billet aluminum design that is strong enough to eliminate this flexing problem, hold your cam in place, and keep your timing in control. Endplay adjustment is made easy thanks to an access hole for the dial indicator. Plus, the 3-piece design allows your camshaft to be replaced without disturbing the oil pan seal or removing the harmonic damper. The covers use the same replacement hardware as the 2-piece models. In addition, some of these covers feature integrated time chain tensioner sets and quick-set cam correct and thrust adjustment.
( 18 )
$379.95
COMP Cams V-Thunder Hy-Rev lifters were designed to handle the demand of today's high performance engines. These anti-pump-up lifters are produced on state-of-the-art computer controlled machinery which hold the tolerances to 0.003 in. for a precise fit. If you are looking to increase rpm capability and valvetrain stability, look no further then COMP Cams V-Thunder Hy-Rev lifters.
Not Yet Reviewed
$24.95
COMP Cams Tri-Power Xtreme modular 2-valve camshafts have been designed to work with the FAST-FLASH programmers to optimize torque and horsepower and improve fuel efficiency. They are available for late model, fuel injected, computer-controlled engines. These 2-valve camshafts feature a hydraulic roller swinging follower design, work with a standard valvetrain, and require no modifications to install.
Not Yet Reviewed
$838.95
—
$854.41
On Sale
COMP Cams Tri-Power Xtreme camshafts have been designed to work with the FAST-FLASH programmers to optimize torque and horsepower and improve fuel efficiency. They are available for late model, fuel injected, computer-controlled engines. The COMP Cams Tri-Power Xtreme camshafts work with a standard valvetrain, and require no modifications to install.
Not Yet Reviewed
$579.95
$463.96
—
$549.95
COMP Cams HRT Max Power Master camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created these more complete, perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power MK-kits include: * HRT Cam * Lifters * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)
( 5 )
$1,644.95
—
$1,839.95
On Sale
COMP Cams Magnum hydraulic roller camshafts are designed for everyone from the serious street performance enthusiast to the all-out competition drag racer. Whether you're driving a street rod or show car with power accessories, or a super gas, super competition car on alcohol, one of these cams will fit your engine's needs.
( 17 )
$549.95
$439.96
—
$549.95
On Sale
COMP Cams HRT Stage 1 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads. All HRT Stage 1 camshafts do not require upgraded valve springs.
( 1 )
$605.95
$521.96
—
$1,236.95
COMP Cams Thumpr LS Master camshaft packages come as a complete valvetrain parts package that is matched for specific LS applications and desired performance. COMP Cams engineers have spent countless hours testing and creating valve train component combinations that are perfectly matched for maximum horsepower and dependability, as well as creating that wildly popular Thumpr sound in GM LS applications. These packages can add anywhere from 60 to 110 hp (depending on the application). COMP Cams Thumpr LS Master camshaft packages include: * Thumpr LS camshaft * Lifters * Timing gear set * Pushrods * Valve springs * Retainers * Valve locks * Spring seats * Valve seats
( 8 )
$1,288.95
On Sale
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
( 1 )
$605.95
$521.96
—
$1,236.95
COMP Cams Xtreme Energy modular 2-valve camshafts are specifically created for high-demanding, overhead-camshaft engine configurations. From stock replacements to ultimate performance, there is an Xtreme Energy cam to meet your performance goals.
( 20 )
$838.95
On Sale
COMP Cams Xtreme Energy camshafts employ the latest cam technology to provide maximum performance. Whether your use is off-roading, towing, or street performance, there's an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers—while delivering increased engine vacuum. Hundreds of models are available for fitment on vehicles from 1955 to the present. Select the cam designed for your application.
( 340 )
$549.95
$288.95
—
$1,067.95
On Sale
COMP Cams Thumpr NSR Hemi Gen III/IV camshafts bring the wildly popular Thumpr sound to late model Hemi engines, while offering big power gains and no need to upgrade valve springs. The cams are made from billet steel cores for increased strength—and require no springs for a far easier installation. Great in naturally aspirated or supercharged applications, COMP Cams Thumpr NSR Hemi Gen III/IV camshafts provide excellent performance in mid- to upper-rpm ranges. Order the model designed for your vehicle and engine application.
Not Yet Reviewed
$579.95
—
$605.95
$521.96
—
$545.36
On Sale
COMP Cams LSR Series hydraulic roller camshafts feature modern lobe profiles that take full advantage of high-flowing late model GM LS3 rectangular port cylinder heads. They are tailored for a specific rpm range and usage, from torque to high-rpm horsepower. Give your Chevy LS3 engine a shot in the arm with one of these COMP Cams LSR Series hydraulic roller camshafts.
( 26 )
$566.95
$453.56
—
$541.95
COMP Cams NSR Stage 1 HRT hydraulic roller camshaft and lifter kits are designed for a substantial bolt-in power increase. They help you avoid costly breakdowns and early retirement of your Hemi engine by maintaining Spintron-proven valvetrain stability high into the rpm range. These cams provide great throttle response, mid-range torque and excellent power; they're perfect for heavier vehicles. Each kit includes everything needed, such as lifters, valve springs, push rods, and seals. Order the model recommended for your application. Wake up that late model Hemi engine and go with the proven a COMP Cams NSR Stage 1 HRT hydraulic roller camshaft and lifter kit.
( 1 )
$1,839.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
