Availability
Chevrolet Performance 6.2L 376 C.I.D. 495 hp engine assemblies feature an impressive 495 hp at 5,570 rpm with 475 lb.-ft. of torque. The assemblies use a production bottom end and the race-tested LS "Hot" cam. With significantly more duration than the stock camshaft, the valves remain open longer allowing these engines to pull in increased amounts of clean air through the large rectangular ports. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engine includes: * Fully assembled long block * Oil pump, pick-up and oil pan * Harmonic balancer * Front timing cover * Oil filter
( 3 )
$7,515.69
Chevrolet Performance LS3 6.2L 376 c.i.d. engine assemblies use an impressive 10.7:1 compression ratio to put out 525 hp at 6,200 rpm and 486 lbs.-ft. of torque at 5,200 rpm. They feature a cast aluminum block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .525 in. intake and .525 in. exhaust valve lift, with a 226 degree intake and 236 degree exhaust valve duration at .050 in. cam lift. Assemblies also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Exhaust manifolds * 14 in. flexplate * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube
Not Yet Reviewed
$11,923.08
Chevrolet Performance hydraulic roller lifters are designed as direct replacements for your engine. These lifters were designed for use by GM to be used in performance engine builds and incorporate improved valving to allow higher rpm capability- what more can you ask for?
( 64 )
$51.99
—
$553.04
Here, at last, is the king of all big block crate engines from Chevrolet Performance. These 502 cu. in. engines are available unassembled or fully assembled. Each version makes extensive use of aluminum to keep weight down—including aluminum heads, intake, water pump, and valve covers. Additionally, ZZ502 c.i.d. deluxe long block crate engines are full of heavy-duty parts, such as: forged aluminum pistons, forged shot-peened steel connecting rods with 7/16 in. bolts, forged steel crankshaft, 14 in. automatic transmission flexplate, 4-bolt main blocks, stainless steel valves, 6 qt. oil pan, and windage trays. The complete Chevrolet Performance engine kits come with Gen 6 four-bolt main blocks with one-piece rear main seals. Hydraulic roller camshaft specs are: .527 in. intake lift, .544 in. exhaust lift; the duration at .050 in. for intake is 224, and 234 for exhaust with a 112-degree lobe centerline. Other features include a single roller timing chain, aluminum large oval port, and 110cc combustion chambered heads. Intake runner volume is 290cc; stainless steel valves are installed, with 2.25 in. intake side and 1.88 in. on the exhaust side. Valve springs are rated at 140 lbs. closed and 368 lbs. open, good for up to .680 in. lift. These heads have exhaust crossovers. Aluminum high-rise dual-plane square bore bolt pattern intake manifolds and an 870 cfm carburetor are also included.
( 3 )
$14,319.04
If you're looking for a cost-effective camshaft solution to delete that pesky DOD—Chevrolet Performance stock replacement non-DOD camshafts are the answer. They're designed to work with OEM valve springs/pushrods in the DOD-equipped Gen 4 trucks. These OEM camshafts are standard equipment on non-DOD 5.3L trucks. Since they come as a single-bolt style, new timing gear won't be necessary. Just swap cams and additional DOD delete parts (sold separately) and you're ready to roll! A fairly stock truck shouldn't require dyno tuning; however, the DOD system must be disabled in ECU for proper functionality. It is advised to consult with your tuner for more information. Order the model recommended for your year/make and engine application. Additional features include: * Hydraulic roller tappet cam * Single-bolt camshaft gear attachment * Computer-controlled compatible * This is the camshaft only (other components sold separately)
( 17 )
$194.99
—
$352.99
Chevrolet Performance has recreated the classic L88 Big Block combination in the ZZ427/480 long block crate engine. Rated at 480 hp, it features an iron block, forged steel crankshaft, and high-flow aluminum cylinder heads. An upgraded hydraulic roller camshaft improves drivability and rpm range, while lower 10.1:1 compression means you can enjoy the power on pump gas, too. The ZZ427 comes complete with: high-flow oval port heads, a high-lift camshaft, aluminum intake manifold, 770 cfm Holley carburetor, an HEI distributor, aluminum water pump, balancer, spark plug wires, and a 14 in. flexplate. If you're looking for a modern version of the classic L88, the Chevrolet Performance ZZ427/480 long block crate engine is the answer. Additional specs and features include: * 4.250 in. bore with 3.750 in stroke * Cast iron block with 4-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum pistons * Hydraulic roller camshaft: - Valve lift .527 in. intake/.544 in. exhaust - Duration (.050 in) 224 intake/ 234 exhaust * Aluminum oval port heads with 110cc chambers * 2.190 in. intake/1.880 in. exhaust valves * 10.1:1 compression ratio * Aluminum 1.7:1 ratio roller rocker arms * HEI distributor * 770 cfm carburetor * Aluminum short water pump * Ignition timing base 10 degrees BTDC, 36 degrees total * 6,400 maximum recommended rpm
( 5 )
$16,256.95
Chevrolet Performance LS3 6.2L 376 c.i.d. 430 hp long block crate engines use an impressive 10.7:1 compression ratio to put out 430 hp at 5,900 rpm and 425 lbs.-ft. of torque at 4,600 rpm. They feature a cast aluminum engine block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .551 in. intake and .522 in. exhaust valve lift with 204 degrees intake and 211 degrees exhaust valve duration at .050 in. cam lift. Long block crate engines also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube
Not Yet Reviewed
$10,317.33
Chevrolet Performance LSX 454 long block crate engines are built with an all-forged, super-tough rotating assembly and feature a pair of new deep-breathing LSX 6-bolt cylinder heads. They also come dressed with great looking, all-new orange powdercoated valve covers with an engraved LSX 454 logo. With a carburetor and high-flow Chevrolet Performance intake manifold (sold separately), these engines are good for about 627 hp and 586 lbs.-ft. of torque. Due to the number of application variations, the LSX 454 crate engines do not include an oil pan, and the valve covers do not include provisions for mounting the ignition coil brackets. Other specifications include: * 4.185 in. bore * 4.125 in. stroke * Cast iron LSX Series block with cross-bolted 6-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum 11.0:1 compression pistons * Hydraulic roller camshaft * 0.635 in. lift intake/0.635 in. lift exhaust, 236 intake/246 exhaust duration at .050 in. lift * Aluminum LSX-LS7 cylinder heads with 70cc chambers * 1.8:1 aluminum roller rocker arms * 58-tooth reluctor wheel
( 1 )
$16,249.06
Chevrolet Performance's 350 c.i.d. base long block crate engines are their most popular choice—because no one else can deliver as much performance for this kind of value. Chevrolet Performance believes that everyone should be able to afford a high-quality GM V8 without going broke. Got a tired, old Chevy that needs a lift? Then these replacement engines are just right for you. Chevrolet Performance 350 base long block engine assemblies start with a 4-bolt main bearing block, aluminum pistons, and a hydraulic camshaft. Then they're topped with cast iron cylinder heads designed to be extremely durable, while still providing good airflow through the engine.
( 4 )
$5,472.99
These Chevrolet Performance deluxe serpentine belt drive kits include the following parts for installation. Kits include: * Belt (water pump, alternator, and power steering) * A/C belt (where applicable) * Tensioner assembly * Idler pulley * Power steering pump * Alternator and power steering pump bracket * Power steering pump brace * Power steering pump pulley * Alternator
Not Yet Reviewed
$1,742.45
Direct from Chevrolet Performance are these 454 c.i.d. bare engine blocks. These are special Gen. VI bare iron blocks with 4.25 in. cylinder bores with 4-bolt main bearing caps. They have machined fuel pump pads, a one-piece rear main seal design, and standard 454 deck height. The maximum cylinder bore on these blocks is 4.25 in. plus .060 in. O.S., and will require the "Gen V/GenVI" design one-piece oil pan.
( 9 )
$2,672.08
Chevrolet Performance LS3 6.2L 376 c.i.d. 430 hp long block crate engines use an impressive 10.7:1 compression ratio to put out 430 hp at 5,900 rpm and 425 lbs.-ft. of torque at 4,600 rpm. Based on the production LS3 engine, these engines use L92-style rectangular-port heads. They feature a cast aluminum engine block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .551 in. intake and .522 in. exhaust valve lift with 204 degrees intake and 211 degrees exhaust valve duration at .050 in. camshaft lift. Long block crate engines also include: * F-body style oil pan, pump and pickup * Harmonic balancer * Front timing cover * Oil Filter
( 5 )
$7,194.63
These Chevrolet Performance engine valley covers are made of aluminum. They can be used for Chevrolet Performance SB2.2, Spider-type, intake manifolds, runners, or race applications.
( 47 )
$164.99
—
$529.99
Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead
( 1 )
$4,550.15
—
$5,565.20
Meet the newest member of the iconic 350-based ZZ engine family—ZZ6! Chevrolet Performance has rated these base crates to really deliver the power, thanks in part to their unique, lightweight aluminum cylinder heads that enable optimal airflow at high rpm. The engines are based on the proven Fast Burn design with large intake runners and valves. Along with their beehive-style valve springs that offer high-rpm efficiency and durability, the ZZ6 blocks make the most of every cubic inch of air drawn through them. Supporting the massive flow of air is an aggressive hydraulic roller camshaft and a forged steel crankshaft. The ZZ6 350 c.i.d. base crate engine kit includes intake manifold, distributor, water pump, damper, flexplate, and the distinctive, race-inspired valve covers. The legendary ZZ6 tech specs are: * Cast iron block with 4-bolt mains * Bore x stroke: 4.000 x 3.48 * Valve lift (in.): .474 intake/.510 exhaust * Camshaft duration at .050 in.: 208 degree intake/221 degree exhaust * Valve size (in.): 2.000 intake/1.550 exhaust * Compression ratio is 9.72:1 nominal * Aluminum roller-style rocker arms * Rocker arm ratio is 1.5:1 * Recommended fuel: Premium pump * Distributor: HEI * Ignition timing: 36 degree total @ 4,000 rpm * Maximum recommended rpm: 5,800 * Balance: external
Not Yet Reviewed
$9,126.05
Chevrolet Performance designed SP350/357 Deluxe crate engines as affordable performers to match just about any budget. Better still, they use stronger components and modern technology to make them a better alternative to rebuilding. Based on the value-driven 350 HO crate engine, their engineers swapped the flat-tappet camshaft for a hydraulic roller and added the latest small block intake manifold design. Together, they help build more power across the rpm band. These SP350/357 motors leverage the strength of a strong rotating assembly secured in a brand-new block with 4-bolt mains and economical Vortec iron cylinder heads to offer years of high-performance excitement at an excellent value. For power, durability, and affordability in the classic Chevy muscle motor, order your own Chevrolet Performance SP350/357 deluxe crate engine! SP350/357 Deluxe packages include: * Intake manifold * Distributor * Damper * 12.750 in. externally-balanced, 153-tooth, automatic transmission flexplate Installation notes: * Holley 4-barrel carb included but not installed on engine * Requires externally balanced flywheel for manual transmission * Requires fuel line from the fuel pump to carburetor * Designed for pre-1976 street vehicles or any off-road vehicle * Not intended for marine applications
( 2 )
$7,618.96
Looking for more power for your ride? Want to drop your quarter mile times substantially? Does OEM reliability and parts interchangeability interest you? Well my friend, you've come to the right place. Why bother rebuilding your existing engine with old, used, and worn-out parts when you can step up to brand-new with these affordable crate engines from Chevrolet Performance. You read it right, these engines feature all-new components built and manufactured by the pros at GM.
( 2 )
$7,285.07
—
$9,886.88
Chevrolet Performance 5.7L 350 C.I.D L05 Gen I 210 HP truck crate engines deliver performance and value. These long blocks start with a precisely CNC-machined 4-bolt main block, graphite coated hypereutectic pistons, and a flat-tappet hydraulic camshaft. Then they're topped with cast iron cylinder heads designed to be extremely durable while still providing good airflow through the engine. All Chevrolet Performance 350 L05 crate engines comply with an 18-step quality process, then get torque-to-turn, compression, and oil pressure-tested at the end of the line. More product features, items, and specs include: * Roller camshaft ready * Mechanical fuel pump capable * Cylinders honed on a computer-controlled machine * Forged steel crankshaft * One-piece rear seal * Powdered metal connecting rods * Silent link-type timing chain * New valve covers, oil pan, timing cover, and harmonic balancer for fewer labor hours at your installer * 210 hp at 4,000 rpm * 300 lbs.-ft. torque at 2,800 rpm * 9.4 to 1 compression ratio * Camshaft with 165/174 duration at 0.050, 0.382 In./0.402 ex. lift * 1.94 in. intake/1.50 in. exhaust valves * Center bolt cylinder heads (65.3cc chambers)
( 1 )
$5,749.99
Chevrolet Performance LSA cylinder heads offer high-strength cast aluminum casting for your supercharged application with premium steel intake and Inconel exhaust valves. Offering high strength, high flow, and high performance, LSA assembled cylinder heads provide an advantage to doing a build your way. Chevrolet Performance delivers those power-building attributes to you with a range of production-style aluminum heads.
( 2 )
$912.99
You're track-ready with extreme performance GM LSX376 crate engines. At home on the street and on the strip, these value-driven Chevrolet Performance crate engines offer lower-compression forged aluminum pistons, a tough bottom end, and high-flow heads. LSX376 engines make a perfect foundation for supercharging, turbocharging, and nitrous--all you need to do is supply the boost! Does your muscle deserve the LSX touch? Yes! Get the strength and power to build a winner with these features: * Race-bred LSX Bowtie block * High-flow LS3 cylinder heads * Blower-friendly 9.0:1 forged pistons * 14 in. automatic transmission flexplate * Unique LSX376 valve covers
Not Yet Reviewed
$13,491.18
The hot new small block V8 in the GM lineup is the hyper-aggressive LS3 6.2L 376 c.i.d. 495 hp engine assembly from Chevrolet Performance. It offers a high-revving 376 c.i.d. combination that represents generations of small block V8 development and engineering. Not only is the LS3 an amazing engine in its stock configuration, but with those high-flowing rectangular port cylinder heads, the LS3 is loaded with potential. To tap into this, the engineers at GM Performance Parts offer you the LS376/480—an LS3 with an upgraded camshaft that boosts power by a whopping 50 hp! The LS376/480 comes with the same great features as the LS3 crate engine. The bottom-end includes a 6-bolt aluminum block, nodular crank, high performance rods, and 10.7:1 pistons. The heads are high-flowing rectangular-port L92 units that have been upgraded with high-revving, hollow-stem valves. The same EFI intake manifold feeds the hungry engine, while 1.7:1 roller rockers work with the upgraded camshaft. The GM Performance Parts engineers picked the LS Hot Cam (P/N 88958733) to take the LS3 to the next level. This cam specs out with .525 in. intake and exhaust valve lift. Duration (at .050 in.) is 219 degrees intake and 228 degrees exhaust, which allows for a dramatic increase in power. The engine will idle and cruise just like an LS3, but the power increase is there whenever you need it. A 14 in. automatic flexplate is included. Specifications: * Engine type: LS Series Gen IV small block V8 * 495 hp at 6,200 rpm, 473 lbs.-ft. torque at 5,000 rpm * Displacement: 376 cubic inch (6.2L) * Bore x Stroke (in.): 4.06 x 3.62 (103.25 x 92mm) * Block: Cast-aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Nodular iron * Connecting rods: Powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Hydraulic roller * Valve lift: .525 in. intake / .525 in. exhaust * Camshaft duration (at .050 in): 219 degrees intake / 228 degrees exhaust * Cylinder heads: Aluminum L92 style port; as cast with 68cc chambers * Valve size: 2.165 int / 1.59 exhaust * Compression ratio: 10.7:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.7:1 * Recommended fuel: 92 octane * Maximum recommended RPM: 6600 * Reluctor wheel: 58X * Balanced: Internal
Not Yet Reviewed
$10,868.33
If it's affordable performance you're looking for to power your project vehicle, Chevrolet Performance's SP350/357 Base Chevrolet crate engine delivers! With 357 hp and a deep reserve of low-rpm torque, it quickly reminds you why Chevrolet's original 350 small block has been the industry benchmark for decades. The SP350/357 leverages the strength of a strong rotating assembly secured in a brand-new block with 4-bolt mains, along with economical Vortec iron cylinder heads. A roller camshaft optimizes driveability and airflow capability. It all adds up to a 24 hp gain over CPP's 350 HO crate engine—and a great, affordable alternative to rebuilding. This base crate engine package includes an assembled long block, including the oil pan. You finish it off your way, with the ignition system, induction system and additional accessories. SPECIFICATIONS: Engine: SP350/357 Base Horsepower: 357 hp at 5500 rpm Torque: 407 lbs.-ft. at 4000 rpm Compression Ratio: 9.0:1 nominal Block: Cast iron with 4-bolt main caps, 4.000 in. bore Crankshaft: Cast Nodular Iron Heads: Cast Iron; 64cc Chambers Valves: 1.940 in./1.500 in. Camshaft Lift: 0.473 in./0.473 in. Hydraulic Roller Duration at 0.050 in.: 215 degree/223 degree INSTALLATION NOTES: * Use the Holley 670 cfm 4-barrel carburetor P/N 19170092 to achieve the listed horsepower and torque * Requires intake manifold, carburetor, distributor, spark plug wires, and water pump to complete assembly * Requires feed line from fuel pump to carburetor * Not intended for marine applications * Balancer and flexplate are NOT included
( 1 )
$6,215.21
Put an LS series engine in your musclecar. These Chevrolet Performance musclecar oil pan kits are designed to fit most 1955-85 GM front engine, rear-wheel drive factory V8 passenger cars. Features include: * 5 qt. capacity aluminum wet sump oil pan * Dipstick and tube * Gaskets * Pickup tube * Windage tray * All mounting hardware
( 144 )
$300.47
Chevrolet Performance timing sprockets are designed to deliver strength and accuracy for many miles of dependable service. They're made from high-quality materials such as steel or iron—and are a vital link for engine timing. The sprockets are available in a variety of configurations for applications from 1992 and up.
( 37 )
$29.99
—
$87.74
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
