Availability
Are you tired of failing mechanical water pumps on your high performance engine? No problem--we have come up with these Summit Racing™ electric water pump Pro Packs to get the job done. They include an aluminum electric water pump, a relay, and a wiring harness. The Summit Racing™ electric water pump Pro Packs will decrease engine drag, while increasing overall cooling capacity and reliability.
( 20 )
$187.87
—
$313.87
GMB high performance water pumps are designed to combat engine overheating associated with higher performance and load applications. They feature a precision-ground, heavy-duty steel bearing that's completely sealed and lubed for life. These replacement pumps have a specially modified, higher performance impeller that eliminates cavitation at all rpm—and maintains maximum volumetric flow of coolant throughout the engine. Order the model recommended for your application. Additional features: * Increase pump pressure up to 300 percent * Eliminate steam pockets trapped inside the engine block * Reduce engine temperature by 15-30 degrees * Help increase horsepower
( 238 )
$58.99
—
$221.99
These billet electric water pumps from Summit Racing™ allow you to save both weight and horsepower. They're constructed from 6061-T6 billet aluminum, and flow more efficiently than your belt-driven stock pumps. In addition, they only draw 6.1 amps. Hardware and gaskets are included.
( 55 )
$222.99
—
$356.99
The water pump is the heart of your inboard or I/O cooling system. Sierra Marine offers circulating water pumps—quality replacements designed specifically for your GM, Ford, or Chrysler-based watercraft engine. Each pump is assembled using new castings, and features corrosion-resistant brass impellers, mounting gaskets, brass plugs and fittings, and is powdercoated for additional protection. Order the pump best suited to your marine engine. Key features: * Engineered to be an exact match to OEM pumps * Assembled with brass bi-directional impellers for installation on right hand or left hand rotating engines * Pumps include gaskets, brass plugs and fittings, stainless steel seal cup and spring (except Model 18-3599-1), and stainless steel backplate (where applicable) * Powdercoated finish to stand up to harsh marine environment
( 11 )
$99.99
—
$210.99
On Sale
Aeromotive universal remote-mount water pump will get you pumped! Appling their hard-earned expertise of fuel delivery, Aeromotive's water pumps are suitable for any street or track vehicle where the stock water pump is inadequate. They flow more at a lower amp draw and are backed by all the trusted engineering perfection that Aeromotive is known for. They are available in two port sizes, and both include a limited 1-year warranty. Choose the best fit for your setup. Features and benefits: * Free flows at 27 gpm at 13.5 V with a max draw of 16 amps * Remote mount, inline electric pump for engine coolant * Reliable brushed electric motor--no additional electronic components required * Aluminum/stainless wetted part construction * Higher flow rates at higher pressure than similarly sized competitors * Dependable, long-lasting mechanical seal * 5/16 in. threads or "Through-Bolt" mounting options * 3/4 in. NPT port or ORB-12 port sizes available
Not Yet Reviewed
$362.85
$326.56
Eddie Marine Deluxe drive showers offer the same cooling dynamics and advantages as their True Billet models, but in a more economical package. They provide a simple, but effective method of providing additional cooling for your Bravo sterndrive. Manufactured from stainless steel, this invaluable unit picks up water from the anti-cavitation plate of your drive and discharges it through the PTFE-lined stainless steel hose onto the drive's top bearing cap. This added cooling will greatly enhance the life of your oil and drive. Eddie Marine Deluxe drive showers feature a bright polished finish, which also adds to the cool style of your boat.
( 4 )
$218.95
Get the additional clearance you need for your belt or gear drive timing system with Allstar Performance water pump spacers. These kits include the necessary gaskets for installation.
( 31 )
$18.99
—
$26.99
Backed by an industry-leading 125,000 mile warranty, Dayco's water pumps are available in cast aluminum or iron version and are offered in application-specific designs for more than 200 million vehicles in operation. Meeting the highest standards, they are put to the test utilizing a unique failure mode analysis for continuous improvement. In addition, Dayco controls every aspect of the manufacturing process, from raw material to finished product of these OE-equivalent water pumps. Features: * Durable one-piece design * Improved impeller for enhanced performance * Case-hardened roller bearings that allow for flex without breaking * Superior gaskets and unitized seals to prevent leaks
( 3 )
$23.99
—
$606.99
PRW high-flow billet electric water pumps deliver faster, increased flow. With smooth radii and transitions, they equalize flow into both sides of the engine for better cooling. These high-flow billet aluminum electric racing water pumps feature 100 watt motors that draw less than 9 amps on a 12 V system, and continued to flow over 50 gpm in a closed system through PRW's extensive testing. They offer a variety of of styles to match your application and each of them are supplied with gaskets, mounting hardware, and wiring connector. Cross the finish line with confidence using PRW high-flow billet electric water pumps. Additional features include: * Lightweight * Suitable for street or strip * The pump housing and elbows are CNC-machined from high-grade aluminum billets with O-ring seals at each connection * The impeller is a multi-vane, axial design that efficiently pumps the water through the engine with no cavitation * An inlet fitting is supplied with each pump and seals with an O-ring for a secure connection * 3,250 hours of life expectancy—well over 100,000 miles of reliable cooling performance * Pump will clear most timing belt drives and most blower drives * Backplate and fasteners included where applicable
( 4 )
$392.99
—
$422.88
On Sale
If you're in the market for a water pump that can deliver powerful performance and unmatched reliability, look no further than Aeromotive's radiator mount electric water pumps. These radiator mount pumps can do just that—or they can be tank-mounted! Crafted from lightweight billet aluminum, these units boast a brushed electric motor that requires no additional electronic components to function. These pumps also feature an enlarged inlet port for maximum flow and an SAE-20 ORB inlet port that allows for multiple inlet fitting options. With the ability to flow 40 GPM at 2 psi at 13.5 V, these radiator mount electric water pumps from Aeromotive are a dependable and long-lasting option for any vehicle. Features and Benefits: * Designed to be mounted on a tank or radiator * Lightweight billet aluminum construction * Reliable brushed electric motor * No additional electronic components required * Flows 40 GPM at 2 psi at 13.5 V * Dependable, long-lasting mechanical seal * Enlarged inlet port for maximum flow * SAE-20 ORB inlet port allows multiple inlet fitting options * Includes weld-on mounting plate and hardware
Not Yet Reviewed
$568.65
$511.78
Eddie Marine flexible drive showers are designed for use on applications where added flexibility is needed to clear external steering systems. They feature a bright polished finish and include stainless steel fasteners. Eddie Marine flexible drive showers offer simple, but effective methods to provide additional cooling for your Bravo sterndrive. Order the model and options recommended for your application.
( 1 )
$180.95
—
$211.95
PRW high-flow diecast water pumps will fulfill your cooling needs, without draining horsepower from your engine. They feature heavy-duty motors that turn at approximately 1,500 rpm, draw only 6 to 7 amps, and will flow at 35 gpm. PRW high-flow diecast water pumps are offered for several applications, available in a chrome or black powdercoat finish, and include gaskets, billet aluminum inlet fitting, mounting hardware, pigtail connector, and timing cover block-off plate (where applicable). Additional features: * Lightweight * Suitable for street or strip * 2,750 hours of continuous operation at 176 degrees F * Pump will clear most timing belt drives and most blower drives * Some applications are available with or without backing plates
Not Yet Reviewed
$310.82
TH Marine all-purpose drains provide a low-cost, efficient solution for water drainage in various applications, including coolers and livewell drains. With their low-profile design, they ensure complete drainage while being easy to install. The molded plastic drains are available in straight and 90 degree angle versions, as well as different styles and diameters. Additional details: * Features a low-profile flat or concave head for effective drainage * Requires a 1 3/8 in. diameter hole and fits standard 3/4 in. marine hose, except APD-118 * Perfect for cooler drains, livewell drains, and fiberglass compartments * Drains mount easily in a 1 3/8 in. diameter hole and are secured with the molded nut that is included. Hose barbs fit 3/4 in. hose for routing of drainage
Not Yet Reviewed
$7.00
—
$9.56
Rein Automotive engine water pump service kits offer a valuable replacement solution to failure-prone cooling related components on the specific BMW engine platforms, such as N51/2/4. At the heart of these kits are OE electric water pumps and OE-quality thermostat assemblies—which are complemented by Rein's problem-solver hoses and necessary mounting hardware. The kits ensure that the time-consuming water pump repair is performed in a single effort, eliminating the possibility of a repeat repair. Replacing all related cooling system components at a suggested interval of 80,000 miles on these complicated engine platforms and performing a proper coolant flush at the same time will ensure longevity of the system. Additional notes: * Ensures proper operation of the cooling system * Helps to eliminate a repeat repair * Addresses the commonly failing plastic coolant host connector * OE-quality electric water pump, thermostat, and hose replacement kit
Not Yet Reviewed
$772.99
CSR universal remote water pumps are made for racing or street applications where clearance may be a problem, but where the capacity and reliability of a CSR pump is preferred. They're machined from 6061 T-6 billet stock and may be mounted virtually anywhere near the engine, using a variety of mounts. In addition, they're available in your choice of several colorful finishes.
Not Yet Reviewed
$294.95
Water pump failure is one way to ruin your weekend cruise or track day. Stay on top of your BMW's maintenance by replacing your M50/M52/M54/S50/S52 water pump before it fails and overheats your beloved inline six. The engineers at Mishimoto have developed a high-quality replacement water pump to continue supporting E36/E46 customers in every aspect of their cooling system needs. The mechanical water pumps feature a durable cast aluminum body and a composite impeller for improved durability. Debates over impeller material are not uncommon. The Mishimoto team determined that their composite impeller provides optimal durability in extreme conditions, while being less taxing on internal bearings compared to a metal impeller unit. Along with robust construction, a new water pump O-ring is included for hassle-free installation. Additional notes: * Direct-fit replacement water pump for all BMW models with M50/M52/M54 and S50/S52 engines * Includes high-quality O-ring for a leak-free seal * Composite impeller provides optimal durability and reduces bearing wear * Restores cooling system performance and protects critical engine components * Ideal for repair or preventative maintenance * Mishimoto Lifetime Warranty * To further protect your cooling system and improve water pump lubrication, refill your system with Mishimoto Liquid Chill Synthetic Engine Coolant
Not Yet Reviewed
$72.95
Cardone new auxiliary water pumps feature much-improved components over the factory hardware. These units have upgraded resin-impregnated bearings that enhance longevity and reduce friction over OE. A more effective rubber sealant is also used to further prevent potential leaks and to promote consistent flow. All Cardone ACPs (Auxiliary Coolant Pumps) are subjected to rigorous testing under varied conditions to ensure real-world reliability, and the mounting brackets and additional hardware are included, where necessary. Features and benefits: * 100 percent functionality tested to deliver guaranteed performance and reliability * Brackets and mounting hardware are identical to the OE for easy installation * Includes mounting brackets, vibration isolators, and additional hardware where necessary * Upgraded bearings to reduce friction and improve longevity * Upgraded rubber and sealant to prevent leakage
Not Yet Reviewed
$101.99
MotoRad engine water pump and thermostat assemblies provide consistent and precise response to your cooling system needs. These components are manufactured with OEM quality materials, safety standards, and specifications to ensure proper fit and performance. They stand up to even the most demanding automotive cooling systems. The replacement water pump assemblies are available for a variety of applications. Additional product features: * Manufactured with OEM specifications and processes * Copper case and wax compound assures rapid response to temperature changes in the coolant * Original equipment design for worry-free direct fit replacement * High-grade stainless steel and copper construction * Meets or exceeds OEM standards * 100 percent tested and calibrated * Rubber gasket/seal included
Not Yet Reviewed
$199.99
MotoRad water pump and thermostat assemblies offer an easy, one-step fit and installation. They are manufactured with OEM-quality material and safety standards by an OE supplier, standing up to even the most demanding automotive cooling systems. MotoRad water pump and thermostat assemblies feature a copper case and wax compound to assure rapid response to temperature changes in the coolant. Choose the assembly designed for your vehicle. Additional features: * 100 percent tested and calibrated * Meets or exceeds OEM standards * High-grade stainless steel and copper construction * Consistent and precise response to cooling system needs * Original equipment design for worry-free, direct-fit replacement
Not Yet Reviewed
$281.99
—
$550.99
Champ Pans water pump spacers are available in several thicknesses for each application. Manufactured from high-quality aluminum, they feature a natural finish. If you need additional clearance for your water pump, Champ Pans spacers are available to get the job done!
Not Yet Reviewed
$2.35
—
$3.53
Eddie Marine True Billet drive showers are simple, effective, and beautiful methods of providing additional cooling for your Bravo sterndrive. Precision CNC-machined from 6061-T6 billet aluminum, the drive showers are available in a bright clear Fusioncoat finish, as well as a variety of anodized and Fusioncoated colors. These invaluable units pick up water from the anti-cavitation plate of your drive and discharge it through the PTFE-lined stainless steel hose onto the drive's top bearing cap. This added cooling will greatly enhance the life of your oil and drive. Stainless steel fasteners are included, and the water pickup can be mounted on either side of the drive.
( 1 )
$293.95
Get maximum cooling for the street or track. Edelbrock Victor Series high-volume water pumps are designed for maximum flow and equal coolant distribution in street cars, race cars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined impellers are larger than other impellers and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leakproof seals, and gaskets. Most Victor Series pumps are available in your choice of satin, black, and polished finishes, or EnduraShine.
( 175 )
$340.95
Summit Bucks
ACDelco mechanical pumps are ideal replacement components for many vehicles on the road today. They're manufactured to meet and exceed OE specifications for fit and performance. The pumps are available in many styles, materials, and other options. Order the model recommended for your application. Features and benefits include: * Available for practically all GM vehicles as well as a wide range of non-GM vehicles * Completely pressure-tested for reliable, leak-free performance * Coated seals support seal longevity and durability * Heat-treated shaft assemblies and impellers provide superior strength and durability * High-quality bearings are permanently sealed and lubricated for greater durability and long life * Uniform wall sections and smooth coolant-flow cavities for efficient operation * Cast iron, aluminum, or steel design, depending on vehicle
( 439 )
$280.99
EMP Stewart Pro Series water pumps are the latest technology for professional racing. By utilizing twin volute housing and a replaceable water pump cartridge, they offer a perfectly balanced flow between both sides of the block. They use less horsepower and can move more water than any other pumps. Pro Series pumps are cost-efficient by allowing just the cartridge to be replaced, making it no longer necessary to change the whole water pump. The cartridge can be changed out very quickly by removing the pulley and four bolts. All Pro Series water pumps use an O-ring to seal the cartridge and do not use a backing plate, so there is no gasket to leak. Whether you race circle track, road race, or drag race, professional or amateur, you will benefit from these water pumps.
( 2 )
$549.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
