Availability
Eddie Marine standard pressure relief valve kits are preferred alternatives to antiquated and restrictive ball valves. These kits regulate water pressure by dumping excess water overboard. Eddie Marine standard kits include: * 1/2 in. NPT relief valve * 6 ft. of 5/8 in. hose * Clamps and fitting * Billet water dump available polished or in a variety of anodized and Fusioncoat finishes
Not Yet Reviewed
$169.95
Eddie Marine deluxe pressure relief valve kits are preferred alternatives to antiquated and restrictive ball valves. These kits regulate water pressure by dumping excess water overboard. Eddie Marine deluxe kits include: * 1/2 in. NPT relief valve * 6 ft. of 5/8 in. hose * Clamps and fitting * Billet water dump available polished or in a variety of anodized and Fusioncoat finishes * Stainless steel tee with gauge bung
( 1 )
$218.95
Eddie Marine adjustable pressure relief valves help prevent engine and strainer failure from water pressure "spikes." They're manufactured from quality materials and offer a 15-40 psi range.
Not Yet Reviewed
$136.95
The marine water pump impeller is a key part of the pump that actively moves the water from outside your boat to the inside cooling system, preventing the engine from overheating. Quicksilver marine water pump impeller repair kits are produced to rigorous quality standards to best protect your engine. Contents vary by kit to meet specific applications, but will include impeller and necessary gaskets. Select the kit designed for your engine's water pump.
Not Yet Reviewed
$31.99
—
$90.49
• Milodon’s exclusive high efficiency impeller design is installed into new GMB castings using heavy-duty bearings and large-diameter shafts. It is the impeller that makes the pump work so much better than a standard, stock design water pump. • Milodon water pumps are available in high-volume (steel or aluminum) and standard-volume versions Pumps are direct factory replacements with OEM hose connections and bosses. • These high-volume pumps have a balanced distribution design (equal flow to both sides of the engine block) and a high-efficiency impeller that increases coolant flow up to 30 percent over stock. • These features increase coolant pressure in the block to prevent hot spots and air pockets and improve coolant flow in the radiator. • A high-flow thermostat is recommended when using a high-volume pump.
( 220 )
$92.95
—
$138.95
Some like chrome, some like powdercoat, some like nothing at all. No matter your preference, We have you covered with a big selection of Summit Racing™ mechanical cast iron water pumps. We have short and long pumps, standard and high-flow models, and a selection of finishes to meet your needs.
( 226 )
$99.99
On Sale
Frostbite electric water pumps are a must for high performance vehicles where horsepower comes at a premium. They eliminate common issues found in traditional mechanical water pumps--parasitic horsepower loss, heavy cast housings, and impeller drag. Frostbite electric aluminum water pumps are available in black and polished finishes with offerings for popular engine platforms. When it comes to keeping your cooling system performing at peak levels, make it Frostbite! Features include: * Available with cast or billet aluminum housings * Free-up lost horsepower resulting from the use of mechanical pumps * Frostbite logo laser-etched for performance look * Ford applications available with block-off plates * Kits come complete with gaskets, wiring pigtail, and mounting hardware
( 10 )
$549.95
$192.95
—
$493.95
Tuff Stuff Performance Supercool water pumps create 30 percent more flow to help cool engines under abnormal conditions. Ideal for race applications, these pumps are made from high-quality materials, such as aluminum and iron, and are available in a variety of finishes. Options include short and long style; standard and high-volume flow; clockwise and counterclockwise rotation; and different pilot diameters. Whether you're replacing or upgrading, there's a Supercool water pump for your specific vehicle.
( 420 )
$118.99
—
$139.99
PRW high-flow billet electric water pumps deliver faster, increased flow. With smooth radii and transitions, they equalize flow into both sides of the engine for better cooling. These high-flow billet aluminum electric racing water pumps feature 100 watt motors that draw less than 9 amps on a 12 V system, and continued to flow over 50 gpm in a closed system through PRW's extensive testing. They offer a variety of of styles to match your application and each of them are supplied with gaskets, mounting hardware, and wiring connector. Cross the finish line with confidence using PRW high-flow billet electric water pumps. Additional features include: * Lightweight * Suitable for street or strip * The pump housing and elbows are CNC-machined from high-grade aluminum billets with O-ring seals at each connection * The impeller is a multi-vane, axial design that efficiently pumps the water through the engine with no cavitation * An inlet fitting is supplied with each pump and seals with an O-ring for a secure connection * 3,250 hours of life expectancy—well over 100,000 miles of reliable cooling performance * Pump will clear most timing belt drives and most blower drives * Backplate and fasteners included where applicable
( 4 )
$408.14
—
$422.88
These Dorman water pump studs are designed to keep your water pump securely mounted in place. They are manufactured from quality materials and include the necessary washers and nuts for installation. The studs are available in a variety of configurations to fit your specific application.
( 26 )
$8.99
Tuff Stuff Performance offers standard-volume mechanical water pumps for a thousands of popular vehicle-specific applications. They're offered in a variety of styles, rotations, materials, finishes, and pilot diameters. Order the replacement model recommended for your vehicle application.
( 18 )
$111.99
—
$116.99
PRW High Performance mechanical water pumps are engineered to deliver increased water flow faster. These super velocity pumps significantly improve cooling for all street, high performance, and racing applications. The low pressure-injected, A356 aluminum alloy pump bodies are complemented by a precision, high-flow cast iron impeller design. Pressure-balanced water passages equalize flow and minimize engine hot spots at any speed. PRW High Performance mechanical water pumps are excellent alternatives for not only racers, but also trucks, towing, and motorhome applications. Order the model recommended for your specific vehicle and engine size. Features, items, and specs: * 35 gpm at 4,000 rpm with minimal cavitation and proportional increased flow rates at 5,000+ rpm * Aircraft industry tolerances * Heavy-duty 0.75 in. diameter steel shafts * Billet steel hubs and shielded-seal roller ball bearings * Back plate O-ring sealed for most applications * System Basis Chip (SBC) applications include adjustable hardware
( 31 )
$235.56
PRW offers water pump backing plates for a variety of applications, including many Ford engines from 1968 and up. These components are used with select pumps, particularly those mounted on engines, to help create a seal and provide support for the pump. PRW replacement plates are machined from aluminum with a natural or black finish. They are crafted to factory specifications to ensure proper fitment and performance. The plates meet or exceed OE quality standards.
Not Yet Reviewed
$25.99
—
$42.99
EMP Stewart water pumps are the premier choice of professional engine builders, race teams, and performance enthusiasts. They're great for street rodding and OEM replacement applications and even the most extreme forms of motorsports in the world, including NASCAR Winston Cup and NHRA Pro Stock. These EMP Stewart Stage 1 water pumps use brand new, original equipment castings that are machined to exacting standards. Stage 1 pumps are compatible with stock lines and brackets, but are internally modified for performance and reliability! These pumps are recommended for stock, OEM, or mild performance applications.
( 80 )
$174.99
Backed by an industry-leading 125,000 mile warranty, Dayco's water pumps are available in cast aluminum or iron version and are offered in application-specific designs for more than 200 million vehicles in operation. Meeting the highest standards, they are put to the test utilizing a unique failure mode analysis for continuous improvement. In addition, Dayco controls every aspect of the manufacturing process, from raw material to finished product of these OE-equivalent water pumps. Features: * Durable one-piece design * Improved impeller for enhanced performance * Case-hardened roller bearings that allow for flex without breaking * Superior gaskets and unitized seals to prevent leaks
( 3 )
$42.99
—
$59.99
Quicksilver offers water pump impellers for a variety of applications, including many Mercury and Mariner outboard boats. These replacements provide cooling water to your outboard engine. Impeller elastomers provide improved flexibility across broad temperature ranges throughout the boating season. They're designed for durability to deliver higher flow rates and cooling flow to protect the engine. The center insert resists tearing to ensure performance. Each part is produced to meet or exceed OEM quality and specifications.
Not Yet Reviewed
$23.49
—
$47.99
Sierra Marine water pump impellers provide direct-replacement fitment when servicing your cooling system. Sierra offers a large selection of impellers to match your exact model.
( 1 )
$15.99
—
$26.99
Quicksilver offers numerous water pump repair kits, but their complete kits are extensive, providing the essential replacement parts to restore optimal cooling for your marine engine. Each Quicksilver complete kit part list varies per specified engine application, but typically will include water pump impeller, housing(s), plate(s), gaskets, and seals. Each piece meets stringent specifications, ensuring the best fit, form, and function. Select the kit designed for your boat engine.
Not Yet Reviewed
$110.99
Yes, Sierra Marine has water pump impeller kits, too! When your focus is on servicing your cooling system, Sierra offers a large selection of complete water pump kits, upper pump kits, and impeller repair kits with all the correct fittings and necessary components to do the job right—the first time.
( 4 )
$37.99
The foundation of your marine water pump system, the base holds, protects, and seals the impeller and other parts, ensuring proper water flow and cooling for the engine. When you need a replacement, Quicksilver water pump bases are ideal choices, offering the correct fit and performance to restore optimal operation of your pump. Select the one designed for your marine engine.
Not Yet Reviewed
$53.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
