Availability
Fleece Performance coolant bypass kits meet the demands for more cooling that comes with increased horsepower. Your engine cooling system was designed to handle a 300-350hp engine. When you increase the power, you increase the demand on your cooling system and the possibility of problems that may lead to failure. Fleece coolant bypass kits feature a secondary thermostat that operates on temperature--not excessive pressure--solving excessive pressure problems before they become an issue by ensuring consistent temperatures across all six cylinders. Each kit includes high-quality AN O-ring fittings and AN hose connections with braided hose to ensure a leak-free installation. When there's a need for better performance, you can rely on coolant bypass kits from Fleece to supply the necessary components for assured greater performance.
( 6 )
$359.00
Moroso offers manifold filler necks in a variety of styles, materials, and finishes—for applications from 1955 and up. These replacements locate the filler at the highest point to bleed off air on cars with low-mount radiators. The filler necks can be located on either the left or right side of the vehicle. They include 1/2 in. NPT fittings for the installation of a water temperature sending unit, and two 1/4 in. NPT fittings for return lines on popular aftermarket cylinder heads.
( 20 )
$47.99
—
$160.99
WEHRS thermostat risers are used when running the remote lines to the rear of the intake to prevent vapor pockets, or if you need more clearance at the front of the motor. These thermostat housing spacers are constructed from quality materials, and are available in several configurations to match any need. Order the WEHRS thermostat riser suited to fit your application.
( 6 )
$28.79
—
$28.99
Moroso thermostat spacers make fixing fitment issues a snap. The billet aluminum spacers raise the thermostat and add ports for water lines to the cylinder heads. The machined O-ring groove on the intake side ensures an excellent seal making installation easy and headache-free.
( 8 )
$48.99
—
$49.99
Canton Racing lightweight Racer water necks with filler tops are machined from billet aluminum. A compact modular design allows the body to be flipped so that the -16 AN outlet fitting can face left or right. These water necks feature a flange filler top, which accepts a standard radiator cap, top and bottom O-ring seals, a 1/2 in. NPT rear port for a temperature sender, and two 3/8 in. NPT ports for cooling lines. Hardware is included.
( 2 )
$139.00
JOES Racing Products water neck outlets are compact and lightweight. These aluminum units have a no. 16 or no. 20 fitting for your radiator hose, and the base has an O-ring for sealing to your intake manifold. JOES also offers a ported version designed with two 3/8 in. NPT ports for additional water lines.
( 1 )
$37.95
—
$69.95
Install your sending units with Vintage Air water neck risers. These aluminum spacers solve the problem of hose clearance, port access, and not being able to use existing manifold outlets. The risers are available to fit vehicles in every decade from the 1950s to the new millennium. Connect pressure-side heater line or hose and the sending units in your classic ride with water neck risers from Vintage Air.
( 21 )
$53.99
—
$56.99
Moroso billet aluminum filler necks allow you to install a variety of bolt-on style filler necks or block-off plates, offering cooling system flexibility for both race and street applications. The base locates the filler neck at the highest point, to bleed off air on cars with low-mount radiators. They include a machined port for installing a water temperature sending unit, and two ports to plumb return lines on popular aftermarket heads. And, to give you versatile mounting options--these filler necks can be flipped 180 degrees for either a left or right water hose outlet location.
( 9 )
$54.99
—
$104.99
Manufacturer Rebate
These innovative Dedenbear water headers are designed for use with remote mount water pumps. Their unique casting weighs only 1 lb. and requires just a single coolant line from the remote mount water pump. Perfect for dragster and roadster application where clearance is limited, Dedenbear water headers permit the use of alternators or belt-driven fuel pumps without any type of water pump interference. The tall, arched shape of the headers allows for the removal of the camshaft timing cover and camshaft without disconnecting any of the coolant system lines or fittings.
( 2 )
$182.99
—
$203.99
Allstar Performance water neck spacers fit between intake manifold and water neck. They're designed to move the thermostat and housing up so they are higher than the intake manifold. The increased thermostat height is useful for cars with radiators higher than the intake manifold and these spacers provide up to four connection options for temperature senders or additional water lines. Most water neck spacers feature an O-ring seal on one side eliminating the need for a gasket.
( 6 )
$45.69
Improved Racing created the first bolt-on automatic transmission fluid adapter with a thermostat for GM's 6L, 8L, and 10L automatic transmissions. Each adapter's built-in thermostat automatically bypasses the transmission cooler until the fluid reaches operating temperature. The thermostat reduces rough shifts caused by overcooled transmission fluid, reduces wear, and improves efficiency and horsepower. Your transmission can now reach operating temps quickly while retaining the cooling capacity needed for high load activities such as towing or racing. It's the best of both worlds! Adapter model TGM-100-T2 features SAE female -6 AN O-ring boss ports that accept adapter fittings for 5/16, 3/8, 1/2 in. hose barbs or male AN fittings. This allows you to run common rubber transmission cooler lines or braided AN lines. Hard tube adapters may also be used to connect the factory lines directly to the adapter (may require minor bending or adjustment of factory lines). Important application notes: * The adapter can only be used in conjunction with external transmission fluid coolers. * The adapter does not directly connect to the factory hard lines. Aftermarket lines or hard tube adapter fittings must be used. * The adapter will only help resolve rough shifting issues if they are caused by overcooling of the transmission, usually due to the addition of a larger aftermarket transmission cooler. Note that 8L45 and 8L90 transmissions rough shifting issues can often be resolved through GM TSB 18-NA-355 and by simply flushing the transmission fluid. Features and benefits: * Bolt-on fitment for 6L, 8L, and 10L series General Motors automatic transmissions (adapters are required for connecting to factory lines). * Built-in thermostat prevents temperatures from dropping below optimal levels, reducing wear, improving efficiency and horsepower, and helping to eliminate rough shifting. * SAE -6 AN female O-ring boss ports for connection flexibility; choose any line size and type you want. * 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish. * Uses the factory GM transmission cooler adapter gasket. * Lifetime Warranty Includes: * TGM-100 transmission cooler adapter block with built-in thermostat * Transmission cooler adapter gasket * Zinc-plated steel mounting screws * Installation instructions Applications: * Fits most General Motors 6L, 8L, and 10L series automatic transmissions, including: all 45, 50, 60, 70, 80, 90 variants, and aftermarket performance versions * Fits both E and non-E transmission variants
Not Yet Reviewed
$199.00
JOES Racing Products Thermo spacers let you add more for better cooling. Thermo spacers are made from strong 6061-T6 aluminum and the bases are fitted with O-rings for sealing to your intake manifold. Now you can plumb additional lines to your heads, install a water temperature sending unit, and a water temp gauge in one spacer. Get cool with JOES Racing Products Thermo spacers.
Not Yet Reviewed
$43.95
These Canton Racing water neck spacers are designed to move the thermostat and housing up 1 in. higher than the intake manifold. This increased thermostat height is helpful for cars that have radiators slightly higher than the intake manifold. They are manufactured from billet aluminum and have a clear anodized finish applied for protection. Canton Racing water neck spacers feature one 1/2 in. NPT and two 3/8 in. NPT female threaded ports to connect your hoses or lines.
( 9 )
$69.00
Canton Racing lightweight water necks are machined from high-quality billet aluminum. A compact, modular design allows the body to be flipped so that the -16 AN outlet fitting can face left or right. A top petcock allows for the positive removal of air out of the cooling system. These water necks with bleed tops feature top and bottom O-ring seals, a 1/2 in. NPT rear port for a temperature sender, and two 3/8 in. NPT ports for cooling lines. Hardware is included.
( 2 )
$139.00
URO Parts thermostat housings and coolant flanges are an important part of their line of cooling system parts that also includes thermostat housing caps, hose connectors, and seats. They offer aluminum thermostat housings that are an upgrade from weak plastic OE components that frequently warp, crack, and leak due to high underhood temperatures. URO Parts thermostat housings and coolant flanges meet or exceed OEM standards, including those of prestigious European auto makers.
( 1 )
$1.99
—
$124.99
Peterson Fluid Systems water neck riser blocks are machined from billet aluminum. They come in various thicknesses and are machined to accept a thermostat. Peterson water neck risers are available with -6, -8 and -10 AN ports for cylinder head water lines, include O-ring seal, and some are available with a temperature sender port. Purchase the one that is right for you.
Not Yet Reviewed
$72.99
—
$97.99
These Meziere water neck plates are designed to help you connect a smaller line to your manifold at the spot where the thermostat housing usually bolts on. They are drilled and tapped 3/4 in. NPT to accept many common fitting arrangements.
Not Yet Reviewed
$33.52
—
$185.60
Eddie Marine thermostat kits offer improved appearance and performance. Constructed of stainless steel, they provide options to enhance and fit your plumbing needs perfectly. Each kit comes complete with a 140 degree thermostat, gasket, bolts, and braided stainless steel water bypass lines. Outlet options include 1 in. slip hose fittings, AN fittings, or 3/4 in. bungs. Strong housings, flawless welding, and beautiful polishing—Eddie Marine thermostat kits deliver a functional, finished customized look. Order the model that best suits your application needs.
Not Yet Reviewed
$239.95
MotoRad offers a full line of thermostats to replace original equipment thermostats. Their integrated housing thermostats are all-in-one units manufactured with OEM quality materials, specifications, and processes by an OE Supplier, and will stand up to the most demanding automotive cooling systems. MotoRad offers excellent coverage for many vehicles and engines; select the integrated housing thermostat designed for your vehicle. Key features: * Meets or exceeds OEM standards * Consistent and precise response to cooling system needs * Original equipment design for worry-free direct-fit replacement * 100 percent tested and calibrated
Not Yet Reviewed
$11.99
—
$237.99
Motorcraft offers a full line of direct fit replacement radiator hoses. Made from EPDM, the rubber-over-braid construction resists swelling, splitting, and cracking. This ensures performance and longevity. Factory-recommended, these hoses are vehicle-specific for makes and models such as Ford, Lincoln, and Mercury. Give your coolant a dependable path to flow with Motorcraft radiator hoses.
( 3 )
$61.99
MotoRad offers UltraStat thermostats for a wide range of car, truck, and van applications from the 1980s and up. Their heavy-gauge stainless steel components provide increased reliability and long-lasting durability. The thermostats feature exclusive BLVT Valve Technology to minimize thermal shock to cooling system components. Select the model and opening temperature rating recommended for your vehicle. Additional details: * Stainless steel thermal element for unmatched corrosion resistance * Revolutionary REAX wax mixture provides quicker reaction time * AccuSpring design for stable temperature control and increased cabin comfort
( 4 )
$9.99
—
$16.99
MotoRad offers fail-safe thermostats for a wide range of vehicles. These OE-style replacements are designed for a direct-fit and optimum performance. High-grade stainless steel and copper construction assure good response to temperature changes in the engine coolant. The thermostats are 100 percent tested and calibrated to meet or exceed factory standards. Order the model recommended for your application.
( 2 )
$11.99
All thermostats are not created equal. MotoRad thermostats offer superior, consistent performance that begins at the heart of their design. The ELAC heat motor, with its unique properties, provides a precise response to your vehicle's cooling system needs. Powered by a precisely formulated thermal-responsive wax pellet in a heat-conducting copper cup equipped with a stainless steel piston, the heat motor is 100 percent calibrated to ensure quality and performance. MotoRad encases the motor in a stainless steel assembly with a self-cleaning, self-aligning valve, flange, bridge, and spring for a securely sealed unit that will keep your engine temperature within OEM specifications. All thermostats are not alike; so, when you want a well-engineered product, look for MotoRad thermostats.
( 4 )
$4.99
—
$219.99
MotoRad offers the best coverage of thermostats in the world for almost any vehicle and engine on or off the road, and their high flow thermostats stand up to the most demanding automotive cooling systems. Thermostats play a critical role in maintaining the working temperature of the engine by positively affecting the efficiency of combustion and transfer of power, consumption of fuel, emission of pollutants, and life of the engine. Manufactured with OEM specifications and processes, these high flow models feature a copper case and wax compound that assures rapid response to temperature changes in the coolant. Keep your engine happy and order the MotoRad high flow thermostat best suited for your application. Product features include: * Larger opening for increased coolant flow * High-grade stainless steel and copper construction provides increased strength and durability * Meets or exceeds OEM standards with consistent and precise response to cooling system needs * 100 percent tested and calibrated * May also include (application dependent) offset design, air relief valve, and/or OEM-style seals
( 1 )
$4.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
