Availability
Showing In Stock Items. Show All 9 Items.
Eddie Marine's water outlets are just more examples that reflect their tradition of producing high-quality boating products. With stainless steel construction, the selection of water outlets are beautifully polished and machined in a variety of sizes to fit your application with durable strength and long-lasting good looks. Eddie Marine also offers quality polished cast aluminum water outlets for budget-minded enthusiasts.
Not Yet Reviewed
$176.00
Improved Racing created the first bolt-on automatic transmission fluid adapter with a thermostat for GM's 6L, 8L, and 10L automatic transmissions. Each adapter's built-in thermostat automatically bypasses the transmission cooler until the fluid reaches operating temperature. The thermostat reduces rough shifts caused by overcooled transmission fluid, reduces wear, and improves efficiency and horsepower. Your transmission can now reach operating temps quickly while retaining the cooling capacity needed for high load activities such as towing or racing. It's the best of both worlds! Adapter model TGM-100-T2 features SAE female -6 AN O-ring boss ports that accept adapter fittings for 5/16, 3/8, 1/2 in. hose barbs or male AN fittings. This allows you to run common rubber transmission cooler lines or braided AN lines. Hard tube adapters may also be used to connect the factory lines directly to the adapter (may require minor bending or adjustment of factory lines). Important application notes: * The adapter can only be used in conjunction with external transmission fluid coolers. * The adapter does not directly connect to the factory hard lines. Aftermarket lines or hard tube adapter fittings must be used. * The adapter will only help resolve rough shifting issues if they are caused by overcooling of the transmission, usually due to the addition of a larger aftermarket transmission cooler. Note that 8L45 and 8L90 transmissions rough shifting issues can often be resolved through GM TSB 18-NA-355 and by simply flushing the transmission fluid. Features and benefits: * Bolt-on fitment for 6L, 8L, and 10L series General Motors automatic transmissions (adapters are required for connecting to factory lines). * Built-in thermostat prevents temperatures from dropping below optimal levels, reducing wear, improving efficiency and horsepower, and helping to eliminate rough shifting. * SAE -6 AN female O-ring boss ports for connection flexibility; choose any line size and type you want. * 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish. * Uses the factory GM transmission cooler adapter gasket. * Lifetime Warranty Includes: * TGM-100 transmission cooler adapter block with built-in thermostat * Transmission cooler adapter gasket * Zinc-plated steel mounting screws * Installation instructions Applications: * Fits most General Motors 6L, 8L, and 10L series automatic transmissions, including: all 45, 50, 60, 70, 80, 90 variants, and aftermarket performance versions * Fits both E and non-E transmission variants
Not Yet Reviewed
$199.00
Moroso offers manifold filler necks in a variety of styles, materials, and finishes—for applications from 1955 and up. These replacements locate the filler at the highest point to bleed off air on cars with low-mount radiators. The filler necks can be located on either the left or right side of the vehicle. They include 1/2 in. NPT fittings for the installation of a water temperature sending unit, and two 1/4 in. NPT fittings for return lines on popular aftermarket cylinder heads.
( 20 )
$43.99
—
$149.99
Canton Racing lightweight Racer water necks with filler tops are machined from billet aluminum. A compact modular design allows the body to be flipped so that the -16 AN outlet fitting can face left or right. These water necks feature a flange filler top, which accepts a standard radiator cap, top and bottom O-ring seals, a 1/2 in. NPT rear port for a temperature sender, and two 3/8 in. NPT ports for cooling lines. Hardware is included.
( 2 )
$139.00
Canton Racing lightweight water necks are machined from high-quality billet aluminum. A compact, modular design allows the body to be flipped so that the -16 AN outlet fitting can face left or right. A top petcock allows for the positive removal of air out of the cooling system. These water necks with bleed tops feature top and bottom O-ring seals, a 1/2 in. NPT rear port for a temperature sender, and two 3/8 in. NPT ports for cooling lines. Hardware is included.
( 2 )
$139.00
Made from investment cast aluminum for a smooth look, these Summit Racing™ water necks include two 1/4 in. NPT outlets, one 1/2 in. NPT outlet, and a 1/8 in. NPT overflow. They use a standard radiator cap, accept 1 1/2 in. radiator hose, and include gaskets and mounting hardware. They come in your choice of either a natural or black powdercoated finish.
( 21 )
$103.99
These innovative Dedenbear water headers are designed for use with remote mount water pumps. Their unique casting weighs only 1 lb. and requires just a single coolant line from the remote mount water pump. Perfect for dragster and roadster application where clearance is limited, Dedenbear water headers permit the use of alternators or belt-driven fuel pumps without any type of water pump interference. The tall, arched shape of the headers allows for the removal of the camshaft timing cover and camshaft without disconnecting any of the coolant system lines or fittings.
( 2 )
$182.99
Howe inline filler necks are radiator accessories designed to help complete your race car's cooling system. These aluminum radiator hose filler necks complete your cooling system.
( 44 )
$35.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
