Availability
Showing In Stock Items. Show All 14 Items.
These Trick Flow® Clevor water crossover kits allow you to mate the cooling passages of Trick Flow® PowerPort Cleveland cylinder heads onto a Ford Windsor engine block. They replace the water passage and thermostat housing on factory Windsor intake manifolds with one that redirects the coolant out of the front of the cylinder heads and moves the thermostat housing horizontally above the original Windsor location. Kits include: * Thermostat housing * 4 hose fittings * 2 suction cups * 4 hose clamps * 2 mounting bolts * 2 mounting washers
( 4 )
$144.99
Granatelli Motor Sports billet thermostat housings will upgrade your OE plastic housing to prolong the life of your motor. Factory units are known to crack, resulting in coolant loss. These replacement housings are made from 6061-T6 aluminum—and include a high-flow thermostat with copper, brass, and stainless steel construction for high reliability. No gaskets are required; the housings use factory bolts on the outside to maintain OE look and function, and they can be installed with basic hand tools. Order the model recommended for your engine application.
( 1 )
$154.61
—
$203.30
Improved Racing created the first bolt-on automatic transmission fluid adapter with a thermostat for GM's 6L, 8L, and 10L automatic transmissions. Each adapter's built-in thermostat automatically bypasses the transmission cooler until the fluid reaches operating temperature. The thermostat reduces rough shifts caused by overcooled transmission fluid, reduces wear, and improves efficiency and horsepower. Your transmission can now reach operating temps quickly while retaining the cooling capacity needed for high load activities such as towing or racing. It's the best of both worlds! Adapter model TGM-100-T2 features SAE female -6 AN O-ring boss ports that accept adapter fittings for 5/16, 3/8, 1/2 in. hose barbs or male AN fittings. This allows you to run common rubber transmission cooler lines or braided AN lines. Hard tube adapters may also be used to connect the factory lines directly to the adapter (may require minor bending or adjustment of factory lines). Important application notes: * The adapter can only be used in conjunction with external transmission fluid coolers. * The adapter does not directly connect to the factory hard lines. Aftermarket lines or hard tube adapter fittings must be used. * The adapter will only help resolve rough shifting issues if they are caused by overcooling of the transmission, usually due to the addition of a larger aftermarket transmission cooler. Note that 8L45 and 8L90 transmissions rough shifting issues can often be resolved through GM TSB 18-NA-355 and by simply flushing the transmission fluid. Features and benefits: * Bolt-on fitment for 6L, 8L, and 10L series General Motors automatic transmissions (adapters are required for connecting to factory lines). * Built-in thermostat prevents temperatures from dropping below optimal levels, reducing wear, improving efficiency and horsepower, and helping to eliminate rough shifting. * SAE -6 AN female O-ring boss ports for connection flexibility; choose any line size and type you want. * 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish. * Uses the factory GM transmission cooler adapter gasket. * Lifetime Warranty Includes: * TGM-100 transmission cooler adapter block with built-in thermostat * Transmission cooler adapter gasket * Zinc-plated steel mounting screws * Installation instructions Applications: * Fits most General Motors 6L, 8L, and 10L series automatic transmissions, including: all 45, 50, 60, 70, 80, 90 variants, and aftermarket performance versions * Fits both E and non-E transmission variants
Not Yet Reviewed
$199.00
MotoRad offers integrated housing thermostats for a variety of car and truck applications from the 1990s and up. They feature high-grade stainless steel and copper construction, and are 100 percent tested and calibrated for consistent, precise response to your cooling system needs. The thermostats provide an OE design for worry-free direct-fit replacement; they meet or exceed factory standards. Order the model recommended for your vehicle.
Not Yet Reviewed
$102.99
Clearance
Sierra Marine thermostats are exact replacements made of the same high-quality materials as your factory original to provide accurate fit and function for reliable performance. They are available in a wide range of make/model and engine applications—order the thermostat model suited to your needs.
( 5 )
$119.99
—
$122.99
Sierra Marine thermostat housings are quality replacement housings made to meet and exceed the factory standards. Each housing is constructed from quality materials and made to be a direct replacement to your engine. Replace your worn out housing with a Sierra Marine thermostat housing today.
Not Yet Reviewed
$208.99
A defective thermostat can result in engine overheating and potential internal damage. Improve the reliability of your Toyota cooling system with a Mishimoto Low-Temperature Racing Thermostat and housing! They're designed as a direct-fit replacement for your aging stock unit. The Mishimoto thermostats have a lower activation temperature (71 degrees C/160 degrees F) compared to the factory thermostat (82 degrees C/180 degrees F). The lower activation temperature allows coolant to flow through the engine earlier, which yields and maintains lower engine temperatures. These thermostats are ideal for use in warmer climates, on vehicles making more power than stock, or under extreme towing/driving conditions. The stock-style housing with O-ring will provide a proper seal and installs easily. Order the model recommended for your application.
Not Yet Reviewed
$107.95
Rein Automotive thermostat housings provide the fit and performance that the original manufacturer intended, if not better, thanks to their use of quality materials. The included thermostats (where applicable) are temperature-calibrated to have a consistent and precise response that suits the cooling system needs of each vehicle. Rein Automotive thermostat housings originate in molds cast directly from the OEM parts to meet the strict tolerances of the factory specifications, ensuring a smooth installation. Dozens of models are available for vehicles from the 1980s and up.
Not Yet Reviewed
$102.99
Meziere water necks are available in a wide range of styles, colors, finishes, and fitment options. These replacements offer factory-style performance and great looks under your hood. Matching outlets are sold separately.
( 19 )
$108.37
—
$190.01
Canton Racing billet aluminum water necks will not crack or break like conventional OEM water necks. They feature CNC-machined billet aluminum construction for ultimate durability. Canton Racing billet aluminum water necks are available with a standard 1 1/2 in. smooth hose connection or a -16 AN male threaded fitting connection. The water necks include stainless steel mounting hardware for the ultimate protection against corrosion.
( 38 )
$139.00
Mishimoto thermostats are effective in noticeably lowering engine coolant temperatures. These thermostats are built with high-quality wax and are shipped with new rubber gaskets (where applicable) for a good, leak-free seal. They are then digitally calibrated for precise operation. Mishimoto thermostats open up at a slightly lower temperature than OEM or standard thermostats once your engine is fully warmed up. This allows the coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures. Whether you have a daily driver or a modified and upgraded turbo, Mishimoto thermostats will maintain optimal temperatures to efficiently cool your application.
( 73 )
$100.95
—
$147.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
