Performance, Racing & OEM Radiators

Summit Racing™ Pro LS Conversion Radiator and Fan Combos

Summit Racing™ Pro LS conversion radiators and fan combos are available for most popular LS swap applications. They're quality-constructed from aluminum to provide exceptional weight savings over stock equipment. These combos also include an electric fan, fan shroud, and mounting hardware. You've put a lot of time and money into transforming your everyday street machine into a street demon, but to truly capture that performance that's too hot to handle, you've got to turn the temperature way down. Install one of these cooling aluminum radiator and fan combos in the front of the engine bay to neutralize the threat of overheating. The radiators come in a variety of configurations, each possessing its own unique combination of features, to work for the specific make and model vehicle that they're intended.

3.38 out of 5 stars ( 13 )

$590.94

—

$647.94

Cold Case Radiator Conversion Kits

Cold Case radiator conversion kits are frequently necessary when converting from a standard 3-row radiator to any heavy-duty 4-row or most aluminum radiators. The included brackets and insulators bolt to the bottom of the core support. The radiator rests on these two mounting points. Since a standard-duty car will often have smaller insulators on the top brackets, where applicable, any required extra rubber insulators are included for the upper brackets.

4.5 out of 5 stars ( 4 )

$44.54

—

$75.54

Cold Case Radiator Support Module Kits

Cold Case offers radiator support module kits for a variety of applications, including 1960s era Camaro LS engine swaps. Each module comes fully assembled and ready to bolt into your vehicle. They consist of an aluminum radiator support, big 1.25 in. tube dual-core crossflow radiator, two 3600 cfm fans/shroud combination, billet cap, and billet overflow tank. These units are very popular with high-tech, high horsepower builds in which maximum cooling is a must. Available in either standard Chevrolet outlet configurations or LS outlet configurations, they're 100 percent TIG-welded and ready to paint or polish. Radiator support module features: * Extra forward design will clear big block and LS front drives * Brushed aluminum finish * 2 row design with 1.25" tubes * Includes dual 14 in. 3600 cfm fans and shroud combination setup * Easy to install even in finished cars * Optional AC condenser and electronic fan controller upgrades available

2.2 out of 5 stars ( 5 )

$2,657.54

—

$2,671.54

Summit Racing™ Performance Fit Aluminum Radiators

Summit Racing™ performance fit radiators feature a quality aluminum core and are designed to fit your vehicle. They offer improved heat dissipation over OEM radiators, and some models are available with a built-in automatic transmission cooler. Modifications may be required when installing Summit Racing™ performance fit radiators. Designed for use with electric fans, the OEM fan shroud is not compatible with these radiators in most applications.

4.33 out of 5 stars ( 1112 )

$405.99

—

$670.99

Be Cool Aluminator Series Radiators

Be Cool Aluminator Series radiators are a perfect choice for high performance cooling that won't break your budget. Offering their best value, these exact fit models feature performance-grade, dual 1 in. cores in natural-finish aluminum, and are manufactured with OEM-sized inlets and outlets in the correct OEM locations. They come with billet filler necks, brass petcocks, and all the necessary mounting brackets. Be Cool Aluminator radiators are offered for a variety of applications to serve your cooling needs!

4.31 out of 5 stars ( 68 )

$395.99

On Sale

Summit Bucks

Mishimoto Performance Radiators

Mishimoto performance radiators are designed and engineered to maximize cooling efficiency, boost engine functions, and, most of all, protect your engine from overheating. Many stock radiators can't handle the additional heat that comes higher horsepower levels. So, swap out your stock radiator for an all-aluminum Mishimoto. Key features and benefits of Mishimoto performance radiators include: * Available for universal and exact fit applications (no cutting or modifications required) * All-aluminum construction for optimal heat dissipation, improved strength, and reliability * Increased cooling capacity due to their massive core size * 100 percent brazed aluminum core for minimal distortion, low stress, and clean joints * Available in various sizes with 2-row or 3-row cores * TIG-welded for clean, strong welds and increased durability * Magnetic drain plugs capture metallic debris or fragments * Included high-pressure 1.3 bar cap raises the coolant boiling point for greater safety and efficiency * Automatic transmission and accessory coolers included where applicable

4.41 out of 5 stars ( 336 )

$324.95

—

$765.22

Be Cool Factory Fit Modules

Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.

4.08 out of 5 stars ( 92 )

$1,199.99

—

$1,499.99

On Sale

Fluidyne Polished Aluminum Radiators

Aluminum automobile radiators are essential for maintaining engine temperatures within optimal ranges, especially in high-stress conditions. Fluidyne polished aluminum radiators deliver unmatched cooling performance and durability, plus a beautiful mirror polished finish, ensuring not only optimal heat exchange for peak engine performance, but a great look under the hood of your vehicle. The use of high-quality aluminum allows for better heat dissipation compared to traditional copper-brass radiators, as well as being lighter, reducing the overall weight of your vehicle, contributing to better fuel efficiency and handling. They are designed to be direct replacements for OEM parts, offering a seamless fit and easy installation. In addition to their superior performance and looks, Fluidyne aluminum automobile radiators are built to withstand the rigors of the road, with enhanced resistance to corrosion and wear. They are rigorously tested to meet the highest standards, ensuring reliability in the most demanding environments. They are available in many 3- and 4-row styles and many applications. Select the radiator designed for your vehicle and experience the difference in quality and performance that sets Fluidyne apart from the competition.

2.5 out of 5 stars ( 2 )

$425.00

$382.50

AFCO Racing LS Swap Direct-Fit Radiators

AFCO Racing LS swap direct-fit radiators are built with the correct inlet and outlet required for the engine swap. They are 100 percent TIG-welded, 100 percent pressure tested and use no epoxy or sealers. These double pass radiators were designed for the rigors of racing, but AFCO added the mounts to allow their superior design on the street. After all, there are more important things to be doing than installing your radiator—like enjoying your truck the way it was intentionally built for—to be driven! AFCO Racing LS swap direct-fit radiators feature: * All aluminum construction * Billet filler neck offers strength and higher quality appearance over stamped * Uses the same tools to install your new radiator as you did to remove the old one * Factory fan shroud provisions on many models * Available with optional fan and shroud assemblies * TIG-welded by skilled craftsmen * Properly positioned inlets and outlets for ease of flow * Drain plugs included

2.67 out of 5 stars ( 3 )

$1,096.99

—

$1,196.99

Be Cool Custom-Fit Aluminum Radiators

Do you want cooling improvement and performance? During a test, a Be Cool aluminum radiator was installed in a 1955 Chevy in about an hour and lowered its operating temperature from 220 degrees to 180 degrees F--even with the air conditioning going full-blast. Be Cool custom-fit aluminum radiators are designed to be an exact fit, and they feature 15 percent more cooling capacity than factory 4-core models. What's more, they can be used with all brands of antifreeze and are available in both standard and polished finishes.

4.07 out of 5 stars ( 123 )

$399.99

—

$949.99

Be Cool Radiator Core Support Panels

Be Cool radiator support side panels are available for a variety of applications. A great looking way to secure your radiator, they're engineered to perform as well as they look and available in natural and polished finishes.

Not Yet Reviewed

$249.99

Special Offer

Clearance

Scratch & Dent

DeWitts LS Modified Pro-Series Radiators

DeWitts LS Modified Pro-Series radiators are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Over a hundred models are available (crossflow or downflow) for vehicles from the 1950s, '60s, '70s, and '80s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.

4.5 out of 5 stars ( 4 )

$841.49

—

$959.99

$757.34

—

$863.99

Be Cool Show & Go Modules

It's show time! Be Cool Show & Go modules will wow the judges with their mirror-like finish. Not only do these modules look show-car great, but their cooling performance will receive top honors as well! These power-cooling modules come with all you need to add stunning performance and appeal to your custom engine compartment. Pop your hood and let everyone appreciate the ultimate expression of cooling technology--the brilliance of American-made Be Cool Show & Go modules! Be Cool Show & Go cooling modules feature: * Polished performance-grade dual 1 in. core radiator * Black fans with billet Be Cool logo motor covers * Fan mounting brackets and hardware * Polished aluminum vented recovery tank * Polished billet aluminum radiator cap with Be Cool logo * Wiring harness with temperature control sending unit and relays

4.75 out of 5 stars ( 8 )

$1,499.99

—

$2,499.99

Cold Case Performance Aluminum Radiator Modules

Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee

4.04 out of 5 stars ( 197 )

$652.54

On Sale

Frostbite Performance Cooling Aluminum Radiators

Protect your ride from overheating! Now you can maximize cooling efficiency with Frostbite's performance cooling aluminum radiators. They're engineered to cool more effectively and weigh less than the older OEM-style brass units, enhancing the overall performance of your engine. Frostbite radiators are available in a variety of application-specific fitments, each unit engineered with aircraft-quality aluminum cores, fittings, tanks with billet aluminum filler necks, and OEM-style brass petcocks. A proper cooling system starts with the right radiator—the Frostbite!

4.1 out of 5 stars ( 323 )

$527.95

Summit Racing™ Radiator Caps

Summit Racing™ offers replacement radiator caps for a variety of applications. These recovery-style caps feature a heavy-duty design built to handle the pressures of street/strip use. They're compatible with many engine designations, and are available in pressure ranges up to 26 psi. Order the cap preferred for your engine bay.

4.6 out of 5 stars ( 92 )

$35.99

Mishimoto X-Line Radiators

Upgrade your cooling system with Mishimoto X-Line radiators! These lightweight, triple-core radiators enhance the performance and cooling efficiency of your engine, whether it's a daily driver or a race application. X-Line radiators feature 100 percent brazed aluminum construction and polished end tanks, and each includes a Mishimoto high-pressure 1.3 bar radiator cap. The units are available in both crossflow and downflow styles, as well as a variety of sizes, for fitment on countless makes/models. Mishimoto X-Line radiators help your engine reach its full potential!

4.43 out of 5 stars ( 69 )

$473.95

Be Cool Factory Fit Aluminum Radiators

Are you tired of fighting cooling problems? Get Be Cool factory fit aluminum radiators to fix the issue. They feature a crossflow design, two 1 in. diameter cooling row tubes, all-aluminum construction, and a billet filler neck. These radiators are perfect bolt-in replacements for your stock radiator. No modifications are required for installation, so there's no cutting, fitting, or welding required. Available for manual or automatic transmissions, Be Cool factory fit aluminum radiators will provide the extra cooling capacity that you've been looking for.

3.33 out of 5 stars ( 24 )

$699.99

—

$849.99

Be Cool Aluminum Radiator Mounting Brackets

Do you own a radiator that's too big for your stock support? Well, Be Cool has designed aluminum radiator mounting brackets that are perfect for those situations. They aren't even drilled, to give them that custom look. Just do your measuring, drill the brackets, and then mount your radiator.

3.67 out of 5 stars ( 15 )

$124.99