Availability
On Sale
DeWitts Pro-Series direct-fit aluminum radiators provide a 25 percent increase in cooling performance. They include features like two rows of one-inch wide cooling tubes, press-formed end tanks, serpentine fins, and factory-type upper and lower channels—and they're epoxy-free! Each radiator core is assembled and brazed in a state-of-the-art aluminum brazing furnace. DeWitts Direct Fit is the company's official trademark, and it means your radiator will fit without modifications.
( 164 )
$529.99
—
$1,218.99
$476.99
—
$1,097.09
On Sale
DeWitts HP-Series radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.25 in. cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts HP-Series radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 15 )
$1,038.99
—
$1,897.99
$935.09
—
$1,708.19
On Sale
DeWitts Pro-Series direct-fit radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.00 inch cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts Pro-Series direct-fit radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 39 )
$529.99
—
$1,791.99
$476.99
—
$1,612.79
On Sale
DeWitts LSX modified radiator modules are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch. DeWitts LSX modified radiator modules are available with a standard finish, an exclusive black ice epoxy coat for a great OEM look, or polished. Over a hundred models are available (crossflow or downflow) for vehicles from the 1960s and '70s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 17 )
$1,362.99
—
$1,987.99
$1,226.69
—
$1,789.19
On Sale
DeWitts direct-fit radiators install in the stock mounting position and use the factory connections without any modifications or adapters. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores contain two rows of cooling tubes, a serpentine fin, and are epoxy-free. These radiators feature press-formed end tanks and are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. They are available with a standard finish or an exclusive black ice epoxy coat for a great OEM look. DeWitts direct-fit radiators can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 4 )
$529.99
—
$1,377.99
$476.99
—
$1,240.19
On Sale
Protect your ride from overheating! Now you can maximize cooling efficiency with Frostbite's performance cooling aluminum radiators. They're engineered to cool more effectively and weigh less than the older OEM-style brass units, enhancing the overall performance of your engine. Frostbite radiators are available in a variety of application-specific fitments, each unit engineered with aircraft-quality aluminum cores, fittings, tanks with billet aluminum filler necks, and OEM-style brass petcocks. A proper cooling system starts with the right radiator—the Frostbite!
( 312 )
$388.95
—
$849.95
$237.95
—
$504.95
On Sale
When restoring or repairing your classic square body truck, you may be dealing with a damaged or rusted out radiator support. Brothers Trucks offers the stock replacements you need. These radiator supports are stamped from heavy-gauge steel and include all the factory mounting points for an easy installation. They're EDP coated for corrosion protection. Order the radiator support designed to fit your Chevy or GMC truck.
( 1 )
$361.05
$234.95
On Sale
Close off your radiator in style with DeWitts engraved radiator caps. They are manufactured from high-quality aluminum and are available in your choice of brushed or black powdercoated finishes. The caps come in two styles--smooth edge for a clean cool look, or gripper with custom grip notched for easy removal.
( 1 )
$49.99
$44.99
On Sale
DeWitts HP-Series direct-fit aluminum radiators provide maximum cooling for high performance vehicles. They include features like two rows of 1.25 in. wide cooling tubes, press-formed end tanks, serpentine fins, and factory-type upper and lower channels—plus, they're epoxy-free! Each radiator core is assembled and brazed in a state-of-the-art aluminum brazing furnace. DeWitts Direct Fit is the company's official trademark, and it means your radiator will fit without modifications.
( 15 )
$741.99
—
$1,685.99
$667.79
—
$1,517.39
On Sale
DeWitts LS Modified Direct Fit Pro-Series radiators are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Over a hundred models are available (crossflow or downflow) for vehicles from the 1950s, '60s, '70s, and '80s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 4 )
$885.99
—
$1,860.99
$797.39
—
$1,674.89
On Sale
These Mr. Gasket Thermocap radiator caps combine a high-pressure radiator cap with a thermometer element; just check the integrated temperature gauge, and you will know when it is safe to remove the cap. They are manufactured from aluminum and are available in your choice of red, blue, or silver anodized finishes. The Mr. Gasket Thermocap radiator caps read temperature in both Fahrenheit and Celsius to suit any vehicle's needs. No tools or modifications are required; just remove your old stock cap and replace it with one of the new Thermocaps. No more guessing games about whether or not it is safe to remove the radiator cap--with one of these Mr. Gasket Thermocap radiator caps, you will be safe each and every time.
( 95 )
$55.29
$35.94
On Sale
Control the airflow through your radiator with DeWitts shroud flaps. They push open at speed when the fan is not in use and allow air to flow out of the shroud freely. When the fan is needed, these flaps suck shut--sealing off the shroud, allowing the fan to pull air through the radiator evenly. They are great additions to any shroud that may have an excess area where air can get trapped, providing a damper to ensure both sides of the radiator are similar. DeWitts flaps are injection-molded from a thermoplastic elastomer which provides a tight seal, aiding the fan for increased airflow across the core. They feature the DeWitts crossed flag logo. Flaps are easily mounted by drilling 1/8 in. holes for the tapered locking pins and square or circle exhaust holes behind the flap. This could be two 1.25 in. holes or a 1.75 in. x 1.25 in. square.
Not Yet Reviewed
$3.99
$3.59
On Sale
DeWitts Radiator custom cushions provide a firm hold. Designed for their direct fit aluminum radiators, these rubber cushions fit exactly into the factory metal U-brackets, for a secure grip that will keep your DeWitt radiator in place.
( 7 )
$21.99
$19.79
On Sale
DeWitts' restoration copper and brass radiators are built with the same technology and precision that define their direct-fit aluminum radiators. These reproductions include the "Harrison" embossment and factory-type channels, just like the original equipment. So if you're restoring a classic sports car or are interested in running your engine at cooler temps, order the DeWitts replacement radiator model designed to fit.
Not Yet Reviewed
$1,589.99
$1,430.99
On Sale
Do you need to replace your stock radiator? Scott Drake's line of radiators will cool your pony's engine down without breaking the bank. Scott Drake manufactures these radiators using quality materials, ensuring a proper fit. All radiators are pressure tested and meet or exceed original equipment specifications.
( 81 )
$618.95
$340.95
On Sale
DeWitts LSX modified brushless radiator modules are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal brushless electric fan mounting in position, one wire harness, and a temperature switch. DeWitts LSX modified brushless radiator modules are available with a standard finish, an exclusive black ice epoxy coat for a great OEM look, or polished. Over a hundred models are available (crossflow or downflow) for vehicles from the 1960s and '70s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
Not Yet Reviewed
$1,754.99
—
$2,040.99
$1,579.49
—
$1,836.89
On Sale
DeWitts direct-fit radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. They are manufactured and furnace-brazed in the DeWitts furnace. Their epoxy-free cores feature two rows of cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch. Some models also have a built-in transmission cooler. DeWitts direct-fit radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
Not Yet Reviewed
$1,483.99
—
$1,579.99
$1,335.59
—
$1,421.99
On Sale
DeWitts exclusive Corvette restoration radiators are 100 percent exact reproductions for all 1960-72 Corvettes. This "stacked plate" type radiator delivers the ultimate in performance and is brazed with today's state-of-the-art techniques. Each radiator is uniquely date-coded to match your Corvette build date.
( 3 )
$1,218.99
—
$1,589.99
$1,097.09
—
$1,430.99
On Sale
DeWitts offers a set of three restoration-style rubber mount cushions for your Harrison-style or Direct-Fit radiator. The support bushings include two round cushions for the bottom two pins on the radiator, and one square cushion for the top middle mount bracket. These parts are useful in several 1960s and '70s era Chevy Corvette models.
Not Yet Reviewed
$14.99
$13.49
On Sale
DeWitts cooling system bleed/drain valves are made from durable brass and have a 1/4 in. NPT thread pitch and a 9/16 in. wrench size. They feature a knurled handle for a better grip when opening and closing.
Not Yet Reviewed
$9.99
$8.99
On Sale
DeWitts Coyote swap radiator combos provide powerful cooling for your build. Pairing radiator and fans, each kit is a high-heat rejection package. The DeWitts aluminum radiator has two rows of 1.0 in. wide cooling tubes to provide a 25 percent increase in radiator cooling performance alone. Then mated with Spal fans and shroud, you have unmatched cooling power and performance.
Not Yet Reviewed
$1,907.99
$1,717.19
On Sale
DeWitts direct-fit brushless radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. They are manufactured and furnace-brazed in the DeWitts furnace. Their epoxy-free cores feature two rows of cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch. Some models also have a built-in transmission cooler. DeWitts direct-fit radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
Not Yet Reviewed
$1,642.99
—
$1,929.99
$1,478.69
—
$1,736.99
On Sale
Frostbite replacement radiator cap covers are made from polished aluminum with a beveled edge and polar bear emblem. Freshen the look of your engine bay with a shiny new cap cover.
( 1 )
$26.35
$14.49
On Sale
Support your radiator with Scott Drake. Scott Drake manufactures these supports from quality, heavy-gauge steel, ensuring a proper fit. They come shipped lacquered black for corrosion protection and are available with or without a lower crossmember attached.
( 5 )
$216.95
$119.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
