Availability
Derale tube-and-fin design for engine oil coolers rely on multiple passes through the cooler core to keep your oil from getting too hot and breaking down. This, in turn, means longer engine life. The coolers run your engine oil through a series of copper tubes that collect the heat and dissipate it to the surrounding air. Coolers come with a thermostatically controlled sandwich adapter and a complete installation kit with 10 ft. of hose if noted. Maintain proper lubricant temperatures with Derale replacement tube and fin engine oil coolers.
( 50 )
$50.99
—
$145.78
Banks Power oil cooler upgrade kits improve heat reduction and performance of your Duramax engine. At the heart of each kit is GM's 2020 Duramax L5P oil cooler, rejecting heat better at the factory-rated 450 hp when tested against the earlier units, a difference that becomes even more apparent at higher engine speed and load--the higher the horsepower, the greater the improvement. Additional cooling plates and improved oil flow increase the available surface area utilized for heat transfer, shedding more BTUs of heat while maintaining proper oil pressure. Hardware, gaskets, and an AMSOIL EAO17 oil filter are included, as well as a pre-installed 1/8 in. NPT port for oil temperature/pressure sensors. Banks Power chooses to include an Amsoil EAO17 oil filter for its superior filtration properties and low oil pressure loss, exceeding OEM filtration specs with 99 percent efficiency at 20 microns. Key features: * Cools 31 percent or better * More cooling plates for better heat rejection * Increased cooling stack surface area * Pre-installed 1/8 in. NPT sensor port for temperature or pressure
( 2 )
$549.00
Be Cool transmission cooler modules protect your investment. Maintaining optimum transmission fluid temperatures becomes all-important in high performance and off-road vehicles. Be Cool external automatic transmission cooler modules are your insurance policy for success. These aluminum dual-pass coolers include an electric fan (pusher or puller) with aluminum mounting brackets and fittings for installation. And, even more cool--with the remote electric fan, there's no need to block your radiator anymore! Safeguard your vehicle's performance with Be Cool transmission cooler modules.
Not Yet Reviewed
$304.99
Reduced power steering temperatures prolong the life of power steering components, as well as help to maintain a consistent power steering feel as temperatures raise with steering demand. Borgeson power steering cooler kits will dramatically reduce power steering temperatures when plumbed into the return line of your power steering system and placed in good air flow. Kits include: * 2.5 in. x 9 in. 2-pass power steering cooler * Cooler mount kit * 6 ft. of high-temperature power steering return hose * 3/8 in. hose barb * Four hose clamps
( 2 )
$42.53
PWR North America billet inline thermostats are used throughout the industry to maintain peak horsepower coolant temperatures. They have AN bypass ports on the body to plumb a recirculation line for the warm-up cycle. Built to be rugged, these components offer the most flow available. PWR North America billet aluminum inline thermostats are offered in a range of applications. Order the billet inline thermostat designed for your application.
( 2 )
$280.00
Borgeson heavy-duty power steering cooler kits offer reduced power steering temperatures, prolonged life of your power steering components, and will help to maintain a consistent power steering feel as temperatures rise with steering demand. The kits provide the needed extra-cooling capacity for autocross and big block applications. Simply plumb Borgeson's heavy-duty cooler into the return line of your power steering system and place in good airflow, dramatically decreasing power steering temperatures.
( 3 )
$51.98
Mishimoto inline oil thermostats allow you to maintain ideal fluid temperature regulation. These units are engineered to properly regulate engine oil. Their compact design is great for use where space or clearance is limited. They include four -10 AN fittings with Dowty seals for leak-free line connections, a CNC-machined heat-sink providing an enhancement in style and a reduction in fluid temperatures, and a universal mounting bracket. Mishimoto thermostats aid in greater cooling efficiency.
( 1 )
$185.95
Vibrant offers a pair of very unique internally baffled catch can assemblies. But whether you have their open loop or closed loop design, it is good to know that repair and replacement parts are available to maintain their looks, performance, and position under the hood. Vibrant replacement catch can caps are crafted from 6061 aluminum and black anodized. They are available in styles for both the recessed filter top and recirculating closed loop top.
Not Yet Reviewed
$159.99
Regulate your oil/fluid temperature automatically with Perma-Cool remote oil thermostats. These inline units operate at 180 degrees F, controlling the flow through your oil cooler to prevent over-cooling in cold climates and quicker warm-ups to operating temperatures. They will also maintain constant system pressure, prevent air pockets, and eliminate cold oil shock. They flow up to 20 gpm and are rated to 200 psi. Thermostats are available individually and in kits. Keep your transmission and engine cool for optimum performance with Perma-Cool remote oil thermostats.
( 3 )
$64.48
—
$69.85
Dorman drive motor inverter coolers protect your hybrid's inverter system from possible damage from case leaks and overheating. Their durable aluminum construction is coated for high-corrosion resistance, increased protection against elements, and long-lasting performance. Maintain the normal operating temperatures of your hybrid's batteries and inverter system with Dorman drive motor inverter coolers. They are offered as direct replacements for a proper fit every time, and are available for many applications.
Not Yet Reviewed
$106.99
—
$317.99
Mopar Replacement engine oil coolers maintain engine cooling. These engine oil coolers offer an OEM fit and function to provide the confidence, that when finished with the installation, their performance will be optimal. Whether you are restoring or repairing your favorite Chrysler, Dodge, or Plymouth, do the job right with genuine Mopar replacement parts.
Not Yet Reviewed
$106.99
—
$258.99
On Sale
AFCO Racing stacked plate fluid coolers feature a patented cooler construction that turns every inch of material into a cooling surface for maximum efficiency per cu. in. of space. The uniquely embossed plate design maintains good performance and very low pressure drop for keeping your transmissions, engines, and differentials cool.
Not Yet Reviewed
$228.99
Mishimoto Liquid Chill OE engine coolant is a synthetic engine coolant/antifreeze and radiator coolant additive. Formulated to operate flawlessly under extreme conditions and with both gasoline and diesel, these 50/50 premix options will help your engine warm up quickly and maintain ideal operating temperatures. Liquid Chill is available in blends for a variety of North American, European and Asian vehicles.
Not Yet Reviewed
$31.95
Mopar Replacement automatic transmission coolers maintain transmission cooling. They offer an OEM fit and function, making your install easier—and providing the confidence that, when finished, the components performance will be optimal. Whether you're restoring or repairing your Chrysler, Dodge, or Plymouth, do the job right with genuine parts from Mopar Replacement.
Not Yet Reviewed
$184.99
—
$536.99
Keyser Manufacturing oil coolers feature a stacked plate design that turns every inch of material into a cooling surface. The embossed plates maintain excellent performance and very low pressure drop. Designed as differential transmission oil coolers, these Keyser Manufacturing units make great economy engine oil coolers, too. Deck-mount models can cool a variety of lubricants, including engine, transmission, and differential oil; and power steering, hydraulic, and transmission fluid. Order the cooler that's best suited for your application.
Not Yet Reviewed
$132.99
—
$302.99
Bostech engine oil coolers help to control and maintain efficient operating temperature. Running your oil through these plate aluminum coolers allows extra time to cool the oil before it recirculates through the engine. Order the model recommended for your vehicle application.
Not Yet Reviewed
$169.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
