Availability
Showing In Stock Items. Show All 25 Items.
Rein Automotive offers OE-quality problem solver engine oil cooler replacement kits that cover all Mercedes OM642 engines, which can suffer from oil leaks as described in Mercedes Service Bulletin LI18.30-P-055434. The leaks may have led to "Check Oil Level" or "Oil Level Low" messages on the vehicle instrument cluster, decreased oil level measurements, oil puddles, or stains underneath the vehicle. The original equipment, as well as this Rein solution, uses upgraded Viton® oil cooler seals to combat this issue when a leaking oil cooler makes a complete upgrade the sustainable solution. These kits contain all the needed parts, including Nissen oil cooler, to ensure the oil leak repair can be performed successfully, thus, enabling technicians to perform a high-quality repair.
Not Yet Reviewed
$388.99
Induction Innovations offers a collection of essential coils for your Mini-Ductor induction heater. These kits enable you to heat and release seized nuts, bolts, and other metallic hardware from corrosion and thread lock compounds This is a package of the most-used smaller diameter coils, manufactured in an assortment of lengths and sizes to fit a variety of applications. Benefits: * Each coil lasts for several hundred uses or more (subject to use); avoiding abrasion and overheating prevents premature wear to the coil * Coil insulation is coated to resist abrasion; but if insulation is breached, a new coil will need to be used * The coils are all flexible and can be bent or separated for a variety of applications * To use around corners or buried deep near plastic or rubber, simply bend to your desired configuration Kits include: * Two 7/8 in. pre-formed coils (MC99-601: 5 in. L x 1.25 in. W) * Two 3/4 in. pre-formed coils (MD99-611: 4.5 in. L x 1.25 in. W) * One 7/8 in. long pre-formed coil (MD99-605: 9.5 in. L x 1.25 in. W) * One 1 in. pre-formed coil (MD99-610: 8.25 in. L x 1.75 in. W) * One 7/8 in. long pre-formed coil (LCK) (MD99-621: 13.25 in. L x 1.25 in. W) * One 1 in. long pre-formed coil (MD99-622: 13.25 in. L x 1.75 in. W)
Not Yet Reviewed
$107.10
Derale stacked plate fluid cooler mounting kits are 4-way bracket systems that offer multiple mounting options for your Derale Performance stacked plate coolers. These high performance mounting kits include brackets with pre-drilled bolt holes and hardware for installation.
( 15 )
$47.07
—
$94.17
Induction Innovations standard coil kits are an accessory for the Mini-Ductor Series and the Inductor Series U-555. These kits enable you to heat and release seized nuts and bolts up to 1.5 in. in diameter and other metallic hardware from corrosion and thread lock compounds. Kits include: * One 1 3/4 in. pre-formed coil (MD99-607: 8.75 in. L x 2.25 in. W) * One 1 1/2 in. pre-formed coil (MD99-608: 8.5 in. L x 2 in. W) * One 1 1/4 in. pre-formed coil (MD99-609: 8.25 in. L x 2 in. W) * One 1 in. pre-formed coil (MD99-610: 8.25 in. L x 1.75 in. W) * Two 7/8 in. pre-formed coils (MD99-601: 5 in. L x 1.25 in. W) * One 3/4 in. pre-formed coil (MD99-611: 4.5 in. L x 1.25 in. W) * One 7/8 in. long pre-formed coil (MD99-605: 9.5 in. L x 1.25 in. W)
Not Yet Reviewed
$134.00
Upgrade your transmission cooling with a Fluidyne high performance bar and plate transmission fluid cooler. Designed for the 2020-24 GM 6.6L Duramax, these coolers offer 4x the heat dissipation of factory models, ensuring your transmission runs cooler and more efficiently. With the densest fins per inch in the market, Fluidyne coolers provide superior cooling performance. All internal splitter plates are fully welded, preventing fluid contamination between the cold and hot side fluids. Built from aerospace-grade aluminum with bar plate construction, each unit offers maximum cooling with minimal pressure drop. These direct replacements use existing factory mounts for easy installation. Additional details: * Enhanced heat dissipation * Direct bolt in replacement * Densest fins per inch * Proprietary fin design for highest performance * Powdercoated with a proprietary heat-wicking compound * Over 4x the heat exchanging capacity compared to the stock cooler
Not Yet Reviewed
$499.00
—
$599.00
Rein Automotive offers OE quality engine oil cooler service kits that include all seals, gaskets and stretch bolts needed to fix oil leaks inside the V of the engine so the oil leak repair can be performed successfully. If oil cooler leaks are left unattended, it could lead to "Check Oil Level" or "Oil Level Low" messages on the vehicle instrument cluster, decreased oil level measurements, oil puddles, or stains underneath the vehicle. Rein OE quality engine oil cooler service kits utilizes upgraded Viton® oil cooler seals to combat engine oil cooler leak issues, serving as a reliable solution.
Not Yet Reviewed
$193.99
Long live your transmission! Heat is the enemy--but with PPE performance transmission coolers on the frontlines, high temperatures don't stand a chance of breaching their prey. Pacific Performance Engineering aluminum coolers feature 60 percent more surface area to lower your rig's fluid temperatures up to 30 degrees over stock. Plus, they're bolt-on replacements and they retain the use of your existing factory oil lines, so installation is pretty straightforward.
( 30 )
$197.99
—
$359.99
Completely re-engineered, these RevMax transmission cooler thermostatic bypass upgrades are a direct bolt-in replacement. No lines are cut, nothing is altered. Simply disconnect your old lines and install them onto your new RevMax bypass. Utilizing RevMax's ZeroStat Technology, these billet 6061 aluminum cooler thermostatic bypass upgrade modules completely remove the orifice restriction for full cooler flow all the time. This equates to lower operating temperatures and helps to prolong the transmission's life. Order the model for your application. Features and benefits: * RevMax's ZeroStat patented technology provides increase in cooler flow due to the elimination of the orifice bottleneck located in the factory part * Direct bolt-in replacement—no lines are cut, nothing is altered, simply disconnect your old lines, and install them into the RevMax new bypass * There is no thermal controlled bypass valve which can fail and cause lack of cooler flow and complete transmission destruction * Instead of closing off cooler flow when the transmission is cold and making your transmission generate unneeded heat that is hard to shed later; RevMax bypass allows your cooler to immediately begin cooling transmission and not waiting for it to get hot, just to try to cool it later * You cannot properly flush your cooler lines without the aid of a hot flush machine that can get hot enough to open the bypass valve up but with the RevMax bypass upgrade you can use room temperature fluid to clean out your cooler anytime you wish without any special tools! * Moules with integral aluminum cooling fins aid in passive cooling of the block and fluid
( 2 )
$89.00
—
$109.00
Improved Racing created the first bolt-on automatic transmission fluid adapter with a thermostat for GM's 6L, 8L, and 10L automatic transmissions. Each adapter's built-in thermostat automatically bypasses the transmission cooler until the fluid reaches operating temperature. The thermostat reduces rough shifts caused by overcooled transmission fluid, reduces wear, and improves efficiency and horsepower. Your transmission can now reach operating temps quickly while retaining the cooling capacity needed for high load activities such as towing or racing. It's the best of both worlds! Adapter model TGM-100-T2 features SAE female -6 AN O-ring boss ports that accept adapter fittings for 5/16, 3/8, 1/2 in. hose barbs or male AN fittings. This allows you to run common rubber transmission cooler lines or braided AN lines. Hard tube adapters may also be used to connect the factory lines directly to the adapter (may require minor bending or adjustment of factory lines). Important application notes: * The adapter can only be used in conjunction with external transmission fluid coolers. * The adapter does not directly connect to the factory hard lines. Aftermarket lines or hard tube adapter fittings must be used. * The adapter will only help resolve rough shifting issues if they are caused by overcooling of the transmission, usually due to the addition of a larger aftermarket transmission cooler. Note that 8L45 and 8L90 transmissions rough shifting issues can often be resolved through GM TSB 18-NA-355 and by simply flushing the transmission fluid. Features and benefits: * Bolt-on fitment for 6L, 8L, and 10L series General Motors automatic transmissions (adapters are required for connecting to factory lines). * Built-in thermostat prevents temperatures from dropping below optimal levels, reducing wear, improving efficiency and horsepower, and helping to eliminate rough shifting. * SAE -6 AN female O-ring boss ports for connection flexibility; choose any line size and type you want. * 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish. * Uses the factory GM transmission cooler adapter gasket. * Lifetime Warranty Includes: * TGM-100 transmission cooler adapter block with built-in thermostat * Transmission cooler adapter gasket * Zinc-plated steel mounting screws * Installation instructions Applications: * Fits most General Motors 6L, 8L, and 10L series automatic transmissions, including: all 45, 50, 60, 70, 80, 90 variants, and aftermarket performance versions * Fits both E and non-E transmission variants
Not Yet Reviewed
$199.00
Improved Racing performance oil cooler kits add massive cooling capacity under your hood. Oil temperatures in track conditions often reach as high as 300 degrees F with the factory setups. These coolers will lower peak oil temps by as much as 30 to 50 degrees F. And—the kits are not only essential for track use, but also perfectly streetable! A built-in thermostat allows engine oil to reach safe operating temperatures much faster than the factory cooling systems. Constructed from plate aluminum, the bolt-on coolers are available for a variety of applications—including Corvettes from 2005 and up.
Not Yet Reviewed
$1,199.00
On Sale
With automatic transmissions, performance and longevity are reliant upon temperature. Reducing internal heat eliminates the chance of overheating fluids, which causes viscosity breakdown and transmission strain. Therefore, a cooler running transmission will last longer. Help protect your transmission on the street and at the strip with Stillen transmission cooler kits. Each kit includes all the necessary adapters, fittings, and hoses you will need for installation. Select the kit designed for your vehicle. Features: * Increases transmission fluid capacity * Helps prevent transmission fluid from overheating * Helps extend the life of your transmission * Bolt-on installation--instructions supplied
Not Yet Reviewed
$333.81
—
$350.27
$267.05
—
$280.22
On Sale
If you are auto-crossing, doing some extreme driving, or have swapped your wheels and tires for a wider and larger diameter set, you are taxing your stock steering fluid cooler and risking the chance of boil over or cooking the fluid. Stillen has the solution. Stillen power steering cooler kits are heavy-duty to handle driving habits ranging from casual cruising to extreme canyon running. They offer increased capacity and volume, as the reservoirs for the units are larger and the lines are larger in diameter, allowing more volume through the steering system and eliminating the chance of boil over. Select the kit designed for your vehicle. Features and benefits: * Heavy-duty steering fluid cooler * Increased fluid capacity * Eliminates the chance of boiling power steering fluid * Bolt-on installation--instructions supplied * Vehicle-specific bracket * Pre-installed fittings * Hoses and hardware
Not Yet Reviewed
$271.27
—
$281.76
$217.02
—
$225.41
URO Parts fluid coolers are an important part of their extensive line of cooling system components that includes both engine oil and automatic transmission coolers. Available for a wide variety of European makes and models, URO Parts fluid coolers are carefully designed and precision-manufactured for high-efficiency, extra strength, and durability. They fit and perform just like OE fluid coolers, but without the exorbitant price tag.
Not Yet Reviewed
$81.99
AFCO Racing power steering fluid coolers are "in line" for performance! These aluminum heat sink units feature an inline design complete with -6AN fittings—and will reduce fluid temperatures up to 30 degrees. A leading cause of power steering component failure is excessive fluid temperature. Keep the temps down and the performance up with AFCO Racing power steering fluid coolers.
( 5 )
$94.99
Get maximum cooling for your hard-working engine components with Allstar Performance linear engine oil coolers. These tube and fin aluminum coolers have a T-slot for easy mounting. The Allstar linear engine oil coolers are the engine accessories that you need to properly cool your power steering and transmission fluid.
Not Yet Reviewed
$49.99
—
$77.99
AFCO Racing transmission coolers lower transmission temperatures with an efficient all aluminum heat sink design. The low profile design allows for multiple mounting positions and the coolers include all necessary mounting hardware.
Not Yet Reviewed
$539.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
