Availability
Showing In Stock Items. Show All 6 Items.
Completely re-engineered, these RevMax transmission cooler thermostatic bypass upgrades are a direct bolt-in replacement. No lines are cut, nothing is altered. Simply disconnect your old lines and install them onto your new RevMax bypass. Utilizing RevMax's ZeroStat Technology, these billet 6061 aluminum cooler thermostatic bypass upgrade modules completely remove the orifice restriction for full cooler flow all the time. This equates to lower operating temperatures and helps to prolong the transmission's life. Order the model for your application. Features and benefits: * RevMax's ZeroStat patented technology provides increase in cooler flow due to the elimination of the orifice bottleneck located in the factory part * Direct bolt-in replacement—no lines are cut, nothing is altered, simply disconnect your old lines, and install them into the RevMax new bypass * There is no thermal controlled bypass valve which can fail and cause lack of cooler flow and complete transmission destruction * Instead of closing off cooler flow when the transmission is cold and making your transmission generate unneeded heat that is hard to shed later; RevMax bypass allows your cooler to immediately begin cooling transmission and not waiting for it to get hot, just to try to cool it later * You cannot properly flush your cooler lines without the aid of a hot flush machine that can get hot enough to open the bypass valve up but with the RevMax bypass upgrade you can use room temperature fluid to clean out your cooler anytime you wish without any special tools! * Moules with integral aluminum cooling fins aid in passive cooling of the block and fluid
Not Yet Reviewed
$109.00
Derale heavy-duty tube and fin transmission coolers feature 1/2 in. seamless copper tubes with Turbulator inserts, expanded into louvered 3/4 in. aluminum cooling fins for maximum heat extraction. They are equipped with pre-drilled steel mounting brackets for solid vehicle attachment, and have all necessary mounting hardware and instructions for a simple hand tool installation. For top-quality underhood cooling components, trust the expertise of Derale Performance.
( 3 )
$109.67
Induction Innovations offers a collection of essential coils for your Mini-Ductor induction heater. These kits enable you to heat and release seized nuts, bolts, and other metallic hardware from corrosion and thread lock compounds This is a package of the most-used smaller diameter coils, manufactured in an assortment of lengths and sizes to fit a variety of applications. Benefits: * Each coil lasts for several hundred uses or more (subject to use); avoiding abrasion and overheating prevents premature wear to the coil * Coil insulation is coated to resist abrasion; but if insulation is breached, a new coil will need to be used * The coils are all flexible and can be bent or separated for a variety of applications * To use around corners or buried deep near plastic or rubber, simply bend to your desired configuration Kits include: * Two 7/8 in. pre-formed coils (MC99-601: 5 in. L x 1.25 in. W) * Two 3/4 in. pre-formed coils (MD99-611: 4.5 in. L x 1.25 in. W) * One 7/8 in. long pre-formed coil (MD99-605: 9.5 in. L x 1.25 in. W) * One 1 in. pre-formed coil (MD99-610: 8.25 in. L x 1.75 in. W) * One 7/8 in. long pre-formed coil (LCK) (MD99-621: 13.25 in. L x 1.25 in. W) * One 1 in. long pre-formed coil (MD99-622: 13.25 in. L x 1.75 in. W)
Not Yet Reviewed
$107.10
Induction Innovations standard coil kits are an accessory for the Mini-Ductor Series and the Inductor Series U-555. These kits enable you to heat and release seized nuts and bolts up to 1.5 in. in diameter and other metallic hardware from corrosion and thread lock compounds. Kits include: * One 1 3/4 in. pre-formed coil (MD99-607: 8.75 in. L x 2.25 in. W) * One 1 1/2 in. pre-formed coil (MD99-608: 8.5 in. L x 2 in. W) * One 1 1/4 in. pre-formed coil (MD99-609: 8.25 in. L x 2 in. W) * One 1 in. pre-formed coil (MD99-610: 8.25 in. L x 1.75 in. W) * Two 7/8 in. pre-formed coils (MD99-601: 5 in. L x 1.25 in. W) * One 3/4 in. pre-formed coil (MD99-611: 4.5 in. L x 1.25 in. W) * One 7/8 in. long pre-formed coil (MD99-605: 9.5 in. L x 1.25 in. W)
Not Yet Reviewed
$134.10
Induction Innovations long coil kits are an accessory for the Mini-Ductor Series and the Inductor Series U-555. These kits enable the user to heat and release seized nuts and bolts up to 1.5 in. in diameter and other metallic hardware from corrosion and thread lock compounds Benefits: * Each coil lasts for several hundred uses or more (subject to use); avoiding abrasion and overheating prevents premature wear to the coil * Coil insulation is coated to resist abrasion; but if insulation is breached, a new coil will need to be used * The coils are all flexible and can be bent or separated for a variety of applications * To use around corners or buried deep near plastic or rubber, simply bend to your desired configuration Kits include: * One 3/4 in. pre-formed coil (P/N MD99-620: 13.25 in. L x 1.25 in. W) * Two 7/8 in. long pre-formed coils (LCK) (MD99-621: 13.25 in. L x 1.25 in. W) * Two 1 in. long pre-formed coils (MD99-622: 13.25 in. L x 1.75 in. W) * One 1 1/4 in. pre-formed coil (MD99-623: 13.25 in. L x 2 in. W) * One 1 1/2 in. pre-formed coil (MD99-624: 13.25 in. L x 2 in. W) * One 1 3/4 in. pre-formed coil (MD99-625: 13.25 in. L x 2.25 in. W)
Not Yet Reviewed
$165.60
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
