Availability
Showing In Stock Items. Show All 115 Items.
Mishimoto thermostats are effective in noticeably lowering engine coolant temperatures. These thermostats are built with high-quality wax and are shipped with new rubber gaskets (where applicable) for a good, leak-free seal. They are then digitally calibrated for precise operation. Mishimoto thermostats open up at a slightly lower temperature than OEM or standard thermostats once your engine is fully warmed up. This allows the coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures. Whether you have a daily driver or a modified and upgraded turbo, Mishimoto thermostats will maintain optimal temperatures to efficiently cool your application.
( 73 )
$58.95
—
$101.95
Billet Specialties thermostat housings not only look good, but they also get rid of leaky paper gaskets thanks to their O-ring seal design. You can choose the conventional vertical housing or the high-tech 360 degree swivel housing. They're available straight-up or with a 0, 15, or 45 degree angle and come complete with stainless hardware.
( 239 )
$62.95
—
$120.95
Summit Bucks
ACDelco water necks and thermostat housings fit your vehicle just like the originals. When you need to restore the efficiency of your water inlet/thermostat housing, these quality replacements fix your issues with leak-free performance and peace of mind. The units are available in a variety of configurations for applications from the 1960s and up. You can be assured that not only the fit, but also the function will be just as expected. Replace your water necks with one of the same from ACDelco.
( 30 )
$55.99
—
$77.99
You always get optimum performance when your engine is running at the proper temperature. Chevrolet Performance thermostats are made of high-quality stainless steel and copper. They help your ride stay cool, to make sure that you get the most out of your vehicle. Stop the knocking, power reduction, and possible engine damage that high-temperature running can cause. Chevrolet Performance thermostats will keep your engine running at the perfect temperature--what more could you ask for?
( 10 )
$55.99
Moroso offers manifold filler necks in a variety of styles, materials, and finishes—for applications from 1955 and up. These replacements locate the filler at the highest point to bleed off air on cars with low-mount radiators. The filler necks can be located on either the left or right side of the vehicle. They include 1/2 in. NPT fittings for the installation of a water temperature sending unit, and two 1/4 in. NPT fittings for return lines on popular aftermarket cylinder heads.
( 20 )
$57.99
—
$93.99
CSR thermostat housings are constructed from CNC-machined billet 6061-T6 aluminum, with a variety of anodized color options. These water necks are available for 1 1/4 in., 1 1/2 in., or -16 AN fitting hose connections. The flange is sealed at the manifold with an O-ring, eliminating the gasket. Stainless steel hardware is included. Order the housing designed for fitment with your vehicle and engine application.
( 36 )
$66.95
—
$102.95
On Sale
Scott Drake swivel water necks are machined from billet aluminum. Their 2-piece design allows the neck to fully rotate to perfectly fit your particular application. These exclusive Scott Drake water necks were designed for classic car applications that require a 45 degree angle. They include mounting hardware and rubber O-ring seals to ensure a leak-proof installation.
( 9 )
$99.95
$89.96
Find a place to fill from with these CSR inline radiator hose fillers. They provide a high positive fill point to help keep air out of your cooling system at all times. CSR's fillers are 6061-T6 billet aluminum machined and TIG-welded for durability.
( 8 )
$73.95
—
$97.95
Position your hose where you want it with CVR thermostat housings. These beautifully machined housings swivel 360 degrees for ease of installation. Crafted from T6-6061 billet aluminum, CVR thermostat housings are bright anodized in several finishes for a professional look under your hood. The flange is sealed at the manifold with an O-ring, eliminating the gasket, plus stainless steel hardware is included. You can count on high performance looks and operation with CVR thermostat housings.
( 67 )
$62.99
—
$108.99
On Sale
Mr. Gasket offers replacement water necks in a variety of styles, materials, finishes, sizes, and angles. Water necks help to hold the vehicle's thermostat in place as it opens and closes—to regulate the flow of coolant through your engine. The opening in the water neck created by the thermostat allows coolant to flow from the radiator back to the engine. Order the model recommended for your vehicle.
( 112 )
$74.19
$57.32
—
$66.77
Install your sending units with Vintage Air water neck risers. These aluminum spacers solve the problem of hose clearance, port access, and not being able to use existing manifold outlets. The risers are available to fit vehicles in every decade from the 1950s to the new millennium. Connect pressure-side heater line or hose and the sending units in your classic ride with water neck risers from Vintage Air.
( 21 )
$53.99
—
$56.99
Auto Metal Direct thermostat housings are officially licensed GM Restoration Parts—so you know they will provide the same fit, look and function as the original. These faithful reproductions in high-grade cast-aluminum include gasket for installation. They are stamped with GM part number as original. Note: Pre-1969 applications have casting number in different location.
( 2 )
$54.99
These Summit Racing™ 360 degree swivel water necks are constructed from high-quality T6-6061 billet aluminum and feature a beautiful, bright-anodized, machined finish. The flange is sealed at the manifold with an O-ring, eliminating the gasket, and stainless steel hardware is included.
( 28 )
$88.99
—
$94.99
Granatelli Motor Sports high-flow thermostats are designed to work with all 5.7L, 6.1L, 6.2L, 6.4L, and Hemi engines—including Hellcat. These high-flow thermostats are a direct OEM replacement part that ensures maximum cooling efficiency and can help protect the engine from damage associated with excessive heat. Granatelli high-flow thermostats have a copper, brass, and stainless steel construction to provide long service and high reliability.
( 10 )
$51.87
—
$55.86
Eddie Motorsports billet thermostat housings swivel 360 degrees to give you various radiator hose routing options. They come with stainless steal fasteners and sealing hardware, unless noted otherwise, and an array of finishes for a sharp appearance and easy installation.
( 13 )
$94.00
—
$107.00
ICT Billet thermostat housing adapters allow the use of SBC swivel or standard housings on LS engines. They're made from aerospace-grade billet aluminum.
Not Yet Reviewed
$87.99
Summit Bucks
ACDelco engine coolant thermostat housings are GM-recommended replacements for your vehicle's worn or damaged original equipment. The inline housing holds the thermostat and serves as a connection point for the radiator hose and inlet or outlet, and may also include ports for sensors or switches. These high-quality replacements are manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life that you expect from General Motors.
( 7 )
$72.99
—
$74.50
Moroso remote thermostat housings locate the filler neck at the highest point of cars with low mount radiators to bleed air. These housings can be flipped 180 degrees for either a left or right outlet location.
( 3 )
$101.99
—
$105.99
Summit Racing™ billet aluminum remote mount inline thermostat housings allow you to place the thermostat anywhere in your cooling system circuit. They use an O-ring seal for ease of replacement and use the common small block Chevrolet thermostat. The housings are available in a variety of water neck inlet/outlet sizes.
( 2 )
$59.99
—
$69.99
Summit Bucks
ACDelco Gold engine coolant thermostats are premium aftermarket replacements. They provide great performance and dependability. These thermostats meet all expectations for fit, form, and function. Get control of your coolant with an ACDelco Gold product.
( 12 )
$58.99
Moroso billet aluminum filler necks allow you to install a variety of bolt-on style filler necks or block-off plates, offering cooling system flexibility for both race and street applications. The base locates the filler neck at the highest point, to bleed off air on cars with low-mount radiators. They include a machined port for installing a water temperature sending unit, and two ports to plumb return lines on popular aftermarket heads. And, to give you versatile mounting options--these filler necks can be flipped 180 degrees for either a left or right water hose outlet location.
( 9 )
$50.99
—
$97.99
On Sale
Clean up your cooling system area with a Scott Drake water neck. These water necks are manufactured using quality materials, ensuring a proper fit.Paint it Ford engine blue to match original, leave natural or polish it to compliment any engine compartment.
( 85 )
$91.59
$82.43
PRW water necks are available with a rubber O-ring or a standard paper gasket for a leak-free seal. They're made from cast or billet aluminum, straight or angled, with either a natural or polished finish. Order the model recommended for your engine application.
Not Yet Reviewed
$54.99
—
$65.22
You can use these Meziere inline thermostat assemblies to install a thermostat inline in your upper radiator hose. A variety of connection options are available to suit your needs.
( 25 )
$77.90
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
