Availability
American Autowire Factory-Fit wiring harnesses are OE replacements and are manufactured according to the original General Motors specifications. Each part number is fully assembled, taped, and ready to install upon arrival. They are best suited for a restoration project with minimal to no modification from the factory specification. American Autowire Factory-Fit harnesses are offered for individual dash, engine, forward lamp, console, rear body, and more, but the best thing is you can purchase a wiring harness as you need it or can afford it, making them great for those on a budget. Plus, since they are OEM-styled the fit is perfect and the installation time is less.
( 28 )
$23.75
—
$30.40
Our Summit Racing™ heavy-gauge steel radiator supports are exact replacements for your factory support. They include all hardware for quick and easy installation.
( 108 )
$25.99
—
$32.99
Water pump and thermostat housing bolts are often stripped when changing out the pump; or they get corroded and eaten away by electrolysis, which weakens the bolts. ICT Billet water pump bolt kits are available for several different applications. They are designed to be used with factory equipment and are manufactured as OEM replacements.
( 14 )
$25.99
OER is proud to offer the finest reproduction dash vent balls available. Designed to meet or exceed the quality of the factory originals, these finely detailed balls are the perfect finishing touch for your dash restoration.
( 7 )
$23.79
Do you need a replacement fan clutch? These fan clutches by Hayden Automotive are manufactured to ensure performance and durability. Hayden offers thermal, non-thermal, and heavy-duty series fan clutches that meet strict factory guidelines. All Hayden Automotive fan clutches should only be used on the specific applications for which they are cataloged. Use of the wrong fan clutch may result in poor cooling, excess noise, reduced mileage, and/or fan clutch failure.
( 451 )
$24.99
—
$49.99
Universal Air Conditioner offers a comprehensive line of mobile climate-control products, including A/C condensers. Quality-built to OEM specifications for accurate fit and high-efficiency function as your factory component, these air conditioning condenser units will help you restore your vehicle's A/C system back to its proper operation. And, with UAC's extensive quality control procedures and affordable pricing, you can be rest assured that you are getting the best product when you decide to purchase the UAC condenser model that is designed for your application. Additional features and benefits: * Helps maintain a desired temperature inside your car * Made of durable materials * Ensures reliable performance * Guarantees high-efficiency * Provides long-lasting service life
( 31 )
$27.99
—
$53.99
OER Authorized heater boxes are authentic reproductions of your original assembly. These detailed replacements are manufactured to exact factory dimensions and contours for classic car applications from the 1960s, '70s, and '80s. Depending on the model you select, the heater box may be crafted from original-style polymer or stamped steel with an EDP coating for rust prevention. Features may include: interior air control doors and flaps, heater core mount, fan chamber, fresh air inlet, case clips and gasket set, heater tube retainer plate, and more. Order the model recommended for your vehicle.
( 4 )
$34.79
Hedman auto air conditioning brackets are designed to be used with a large piston-type air compressor. These brackets allow you to retain your factory air conditioning when you install your Hedman heeders.
( 22 )
$23.99
On Sale
Decades of heat and sun can cause a lot of the plastic interior pieces of your square body to become brittle, faded, and break. One of these common parts are the air vents. Holley Classic Trucks replacement air vent outlets are the perfect solution to renew the look of your interior. They're made with precise tooling for an excellent fit and finish and include all factory mounting points for an easy installation. Select the in-dash air vent outlets designed to fit your vehicle.
( 2 )
$23.75
Auto Metal Direct heater resistor assemblies provide a direct replacement for your old resistors. Their 3-speed resistors are produced from original factory specs and come available for vehicles with or without A/C. Get your heating and cooling back up to speed with new Auto Metal Direct heater resistor assemblies.
( 2 )
$24.99
Keep the heat on with OMIX-ADA heater/defroster duct hoses. Built to the original specifications, these hoses are quality, direct fit OE replacements that are perfect for updating worn-out, missing, or cracked factory originals on your Jeep. They feature built-in clamps on each duct end to help facilitate a more secure and easy hose installation. If it's not working like it should, replace it with OMIX-ADA.
( 6 )
$37.99
These Summit Racing™ fan shroud mounting brackets are designed to install your factory fan shroud to the Summit Racing™ radiator. They are manufactured from aluminum and include the installation clips for easy mounting. Keeping your fan shroud in the correct position helps cool your engine to the radiators' maximum potential. Install your fan shroud the easy way with one of these Summit Racing™ fan shroud mounting brackets.
( 4 )
$26.99
OER Authorized dash air conditioning vent assemblies are the factory reproduction way to direct the cold air in your cabin area. Each vent assembly is manufactured to correct factory specifications and replicates the original in design, appearance, and fitment.
Not Yet Reviewed
$27.99
Holley Classic Trucks offers defrost vents for a variety of trucks and SUVs from the 1980s and '90s. Decades of heat and sun can cause plastic interior pieces of your square body to become brittle, faded, and break. These replacement vents are identical to the OE covers for a stock fit and appearance. They're made with new tooling and include factory mounting points for an easy installation. The vents fit both the left and right side.
( 1 )
$20.55
Take control of the airflow in your vehicle with one of these OER heater control cable sets. They include defroster and temperature control cables to help adjust the airflow of your heater control unit. The cable sets are available for vehicles with or without factory air conditioning.
( 7 )
$47.79
—
$48.99
• Milodon’s exclusive high efficiency impeller design is installed into new GMB castings using heavy-duty bearings and large-diameter shafts. It is the impeller that makes the pump work so much better than a standard, stock design water pump. • Milodon water pumps are available in high-volume (steel or aluminum) and standard-volume versions Pumps are direct factory replacements with OEM hose connections and bosses. • These high-volume pumps have a balanced distribution design (equal flow to both sides of the engine block) and a high-efficiency impeller that increases coolant flow up to 30 percent over stock. • These features increase coolant pressure in the block to prevent hot spots and air pockets and improve coolant flow in the radiator. • A high-flow thermostat is recommended when using a high-volume pump.
( 220 )
$44.95
MotoRad offers integrated housing thermostats for a variety of car and truck applications from the 1990s and up. They feature high-grade stainless steel and copper construction, and are 100 percent tested and calibrated for consistent, precise response to your cooling system needs. The thermostats provide an OE design for worry-free direct-fit replacement; they meet or exceed factory standards. Order the model recommended for your vehicle.
Not Yet Reviewed
$20.99
—
$56.99
Goodmark heater blower cases are designed to seal the factory heater. They are manufactured from steel and have a black finish applied for corrosion protection.
( 9 )
$43.99
Water pump bearings from OMIX-ADA are direct OE replacement parts built to factory specifications. Your vehicle's bearing assembly is the mechanical support that allows continuous rotation of the impeller. When the water pump bearings begin to make a growling or squealing noise, it's a definite signal to upgrade the part. Without addressing the problem, over time the bearings will make the shaft wobble and feel loose—or start seeping. OMIX-ADA replacement water pump bearings are an economical repair for select vehicles as far back as the 1940s.
( 8 )
$27.99
Four Seasons heater cores feature heavy-duty construction for durability and quality engineering to help provide the original factory fit, form, and function. All units include OE-style hardware for installation ease and receive independent testing for proven quality and performance. Keep your older vehicle operating like new with the replacement Four Seasons heater core designed to fit your vehicle.
( 15 )
$24.99
—
$49.99
Vintage Air offers SureFit wiring harness kits to connect the factory control board to Gen IV and V SureFit computers. These wiring kits afford you the right fit and function for reliable performance, and provides a hassle-free install, minimizing vehicle alterations to retain a factory-clean appearance.
( 1 )
$29.99
BluePrint Engines offers water necks and thermostat housings for a variety of Chevrolet V8 small block and big block engine applications from 1955 and up. These engine coolant housings are available in numerous configurations, manufactured from factory materials and specifications to ensure proper fitment and long-lasting performance. Order the model recommended for your vehicle.
( 2 )
$36.95
Is that coolant overflow tank in your classic truck leaking, cracked or damaged? Replace it with a new one from Brothers Trucks to prevent the engine from overheating, while also providing a fresh look under the hood. Brothers Trucks coolant overflow tanks are available in several applications, including for select year Chevrolet/GMC C/K Series trucks, Blazer/Jimmy and Suburban models. Each overflow coolant tank features a durable construction molded from precise tooling for easy fitment and a factory look.
Not Yet Reviewed
$45.82
ICT Billet water pump spacer kits are available in several thicknesses for LS Series engines. They can be used to install truck-style accessories (power steering, alternator, A/C compressor, etc.) while using factory LS3 or LS1 water pumps. Made from aerospace-grade billet aluminum, they feature a natural aluminum finish and include bolts, a steam port plug in one of the spacers, and reusable O-ring seals.
( 15 )
$29.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
