Availability
Showing In Stock Items. Show All 45 Items.
Just need the insides? Vintage Air SureFit evaporator kits are essentially all the air conditioning system components and accessories needed for inside your vehicle. In your kit you may receive (depending on the kit) evaporator and bracket, louvers (when required), duct hose, wiring harness, new controls or cable converters, hardware, and installation manual. So, when you don't need a "complete" SureFit kit choose evaporator kits from Vintage Air.
Not Yet Reviewed
$1,682.99
Vintage Air Gen-V Magnum Max SureFit Systems evaporator kits offer powerful and intelligent climate control. The Gen 5 uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Each evaporator kit includes the evaporator unit with Magnum Max blower and mounting brackets, louvers (where required), duct hose, wiring harness, bolt-in replacement control panel, hardware, and installation instructions. Select the Vintage Air Gen-V Magnum Max SureFit system designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength, and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * New electronic control panel included * Stamped firewall cover assembly * Quiet high performance blower
Not Yet Reviewed
$1,708.99
Get complete control of your engine temperature! Derale PWM electric fan Powerpacks have integrated their high-performing PWM fan controllers into the fan units. The PWM fan controller features built-in soft start technology and utilizes pulse width modulation to constantly adjust electric fan speeds from 0-100%. This maintains the optimal engine operating temperature while allowing the fans to operate at the percentage needed, instead of 100% all the time. By using the fans at the percentage needed component life is increased and amperage spikes are eliminated. The Powerpacks use high output electric fans incorporated into precision engineered shrouds. The Derale Performance Powerpacks are available with single or dual fans and can conquer the most difficult cooling conditions.
( 32 )
$2,027.99
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 9 )
$1,650.99
—
$1,920.99
DeWitts LSX modified radiator modules are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch. DeWitts LSX modified radiator modules are available with a standard finish, an exclusive black ice epoxy coat for a great OEM look, or polished. Over a hundred models are available (crossflow or downflow) for vehicles from the 1960s and '70s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 16 )
$1,544.99
—
$1,874.99
PWR North America OE fit radiator modules offer you the latest in aluminum core designs for optimum cooling performance. With features like Spal fans, fluid coolers, unique fan mounting, and an exclusive upper soft mounting system, the PWR North America OE fit radiator modules can't be beat for performance and simplicity. These PWR radiator modules will lower oil temperatures better than any air to oil cooler! PWR's OE fit radiator modules are available in a range of applications to meet your specific cooling needs.
Not Yet Reviewed
$1,723.00
—
$2,189.00
Instant Rebate
Get complete control of your engine temperature! Derale has combined their high-performing shrouded brushless Powerpacks with the ultimate fan controller. Using a brushless electric fan incorporated into an engineered shroud, this Powerpack can conquer even the most difficult cooling conditions. The PWM fan controller comes with built-in soft start technology. The controller utilizes Pulse Width Modulation to constantly adjust electric fan speeds from 0-100%, to maintain 185°F temperature. No more reacting to the engine temps, you can control it! This allows the 17" brushless electric fan to operate at the percentage needed, instead of 100% all the time, therefore increasing component life and eliminating amperage spikes.
Not Yet Reviewed
$2,027.99
The Gen-V is Vintage Air's most powerful and intelligent climate control system. It uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate- and fin-cooling coils provide outstanding performance and instant temperature adjustments. The Gen-V Super Magnum SureFit system evaporator kit includes the evaporator unit with Magnum blower and mounting brackets, louvers (where required), duct hose wiring harness, new bolt-in replacement control panel, hardware, and installation instructions. Additional details: * Also includes variable blower speed and dash/floor/defrost blend * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * New electronic control panel included * Stamped firewall cover assembly * Quiet high performance blower * This kit fits 1982-88 Oldsmobile Cutlass models with factory air
Not Yet Reviewed
$1,708.99
Scott Drake OE-style air conditioning kits are complete packages which include the underdash unit, drain tube, mounting brackets, compressor, all necessary hoses, the receiver/dryer and condenser. These kits perform better than the original ever did—and require less horsepower to operate!
Not Yet Reviewed
$1,549.95
On Sale
Griffin Exact Fit radiator combos are the perfect pairing to take the "scary" out of electric fans! Exact Fit combos deliver Griffin's high-quality aluminum OEM fit and style radiators. They're constructed with MaxCool or ExtremeCool tubing, hand-formed aluminum shrouds, and performance electric fans. These units are easy to install, provide the best factory appearance, and fit your ride with out-of-the-box affordable performance cooling. Want to switch to electric fans? American-made Griffin Exact Fit radiator combos provide you with the perfect solution without any guesswork. Order the package designed for your specific vehicle.
( 90 )
$1,726.00
—
$2,238.00
$1,553.40
—
$2,014.20
DeWitts HP-Series radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.25 in. cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts HP-Series radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 15 )
$1,559.99
—
$1,589.99
DeWitts Pro-Series direct-fit radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.00 inch cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts Pro-Series direct-fit radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 39 )
$1,539.99
—
$1,549.99
"The cooling is in the copper." Johnson's Radiator Works engine swap radiators feature a 4-row, 2 3/4 in. thick, high-flow copper core, ideal for the best cooling efficiency possible. They are made with heavy-gauge steel side brackets and mounting holes pre-stamped where needed. Antique, vintage, or classic, Johnson's has a radiator guaranteed to cool your vehicle and engine setup. Additional features: * Copper core with one-piece brass tanks * Brass tubes made in-house--125 in. x 0.5 in. * Top tanks stamped from .040 deep draw brass * Quality control start to finish from raw material to finished product * Made with original tooling, equipment, and techniques from Walker * Designed to operate with a 15 to 18 lb. radiator cap (except Flathead application 7 lb. cap recommended) * Brass drain cock
( 2 )
$1,600.00
—
$1,695.00
Mishimoto performance radiators are designed and engineered to maximize cooling efficiency, boost engine functions, and, most of all, protect your engine from overheating. Many stock radiators can't handle the additional heat that comes higher horsepower levels. So, swap out your stock radiator for an all-aluminum Mishimoto. Key features and benefits of Mishimoto performance radiators include: * Available for universal and exact fit applications (no cutting or modifications required) * All-aluminum construction for optimal heat dissipation, improved strength, and reliability * Increased cooling capacity due to their massive core size * 100 percent brazed aluminum core for minimal distortion, low stress, and clean joints * Available in various sizes with 2-row or 3-row cores * TIG-welded for clean, strong welds and increased durability * Magnetic drain plugs capture metallic debris or fragments * Included high-pressure 1.3 bar cap raises the coolant boiling point for greater safety and efficiency * Automatic transmission and accessory coolers included where applicable
( 331 )
$1,898.95
PWR North America radiator modules are revolutionary advancements in cooling technology. These aluminum modules incorporate Spal fans for reliable high performance cooling. The radiators feature a reinforced, race fin design cross-braced for maximum strength and durability, along with a unique shape with a hemmed leading edge for additional cooling and maximum durability. Developed using PWR's current F1 and NASCAR cooling technology, their cores provide unmatched performance. You too can now have the same cooling technology for the street as the top motorsports champions use week-after-week.
( 2 )
$1,723.00
—
$2,189.00
Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.
( 232 )
$1,686.00
—
$2,130.00
Restore and enhance your cooling system with a Mishimoto Performance Radiator Essentials Bundle. The bundles include high-quality upgraded cooling components to replace items Mishimoto found to be the most failure-prone. Kits feature an aluminum radiator, silicone radiator hose kit, high- and low-temperature thermostats—plus other components (depending on the bundle you select). The Performance radiator features full aluminum construction with durable TIG-welded end tanks. In addition, it's designed with a massive two-row 2.2 in. thick core, which provides substantial improvements in cooling efficiency. The radiator hose kit is constructed from four layers of silicone with heat-resistant embedded fibers. This combination of materials provides substantially improved heat and pressure tolerance compared to the stock rubber hoses. In addition, the kit includes a CNC-machined aluminum quick-disconnect fitting, providing a considerable improvement in durability over the stock plastic unit. Rounding out the basic Essentials Bundle is a pair of thermostat sets; high-temperature thermostats hasten engine warmup, making it ideal for use in cold climates. The low-temperature thermostats have a lower activation temperature compared to the factory thermostat. Lower activation temperature allows coolant to flow through the engine earlier, reducing the risk of overheating in hot environments. Order the bundle with components preferred for your vehicle.
Not Yet Reviewed
$1,843.95
—
$1,972.95
DeWitts LSX modified brushless radiator modules are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal brushless electric fan mounting in position, one wire harness, and a temperature switch. DeWitts LSX modified brushless radiator modules are available with a standard finish, an exclusive black ice epoxy coat for a great OEM look, or polished. Over a hundred models are available (crossflow or downflow) for vehicles from the 1960s and '70s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
Not Yet Reviewed
$1,654.99
Classic Instruments offers engine swap radiators for a wide range of applications, including hundreds of Chevrolet and GMC trucks from the 1940s, '50s, '60s, and '70s. They're built as direct-fit stock replacements, complete with the appropriate connections. The radiators are fabricated with a high-flow copper core and one-piece brass tank, along with heavy-duty 12-gauge steel side brackets and mounting holes pre-stamped. Available in crossflow and downflow styles, a variety of size options, Classic Instruments radiators are designed for the best cooling efficiency possible. Additional details: * Simple bolt-in install with no modifications to grille or grille shell * Brass tubes made in-house * Top tanks stamped from .040 deep draw brass * Quality control start to finish, from raw material to finished product * Designed to operate with a 15-18 lb. radiator cap -- Exclusion of flathead application 7 lb. cap recommended * Brass drain cock
Not Yet Reviewed
$1,630.00
Don't lose your cool! Scott Drake Hurricane air conditioning kits are complete conversion packages with upgraded electronic controls. They will not fit generator-equipped cars. These kits contain everything you need to install these units in your vintage car. Scott Drake is a trusted manufacturer of quality aftermarket parts.
( 2 )
$1,899.95
Hayden Automotive offers fluid coolers in a variety of sizes and materials. These units help to extend the life of your vehicle by lowering operating temperatures. Coolers are available for many types of fluids, including transmission, hydraulic, and power steering; as well as engine coolant, diesel fluid, and engine and differential oil. Order the universal or vehicle-specific model needed for your application.
( 167 )
$1,809.99
For heavy-duty vehicles that are under extreme conditions or high mileage, you need to go beyond the OE specifications to have a product that will perform and go the distance. With a goal to always meet or beat OE quality standards, OSC Automotive Heavy-Duty radiators are designed and engineered with consistent attention to Quality Control, as well as extensive research and development. OSC also understands that it is very important that each part goes in as easily as the existing one comes out. So, their HD radiators provide a drop-in fit that looks and functions like the original unit. Choose the replacement HD radiator made for your commercial truck. Key features and benefits: * Many models have a welded double header design--reduces flexing * All "tabbed-over" models have a second crimp strip * Most applications come with mounting hardware * Superior stainless steel coolers replace OE aluminum * More than 50 models available with frames * Over 450 part numbers covering Class 8 trucks and forklifts
( 1 )
$1,529.99
—
$1,922.99
Four Seasons air conditioning compressors are made using state-of-the-art technology and quality assurance processes. Their compressors are carefully assembled and then undergo a battery of stringent quality tests, including noise, function, leak, and pressure testing. You can feel confident that you're purchasing a high-quality product from Four Seasons.
( 163 )
$1,559.99
—
$1,860.99
Griffin exact fit radiators feature an OEM-style stamped tank and are made of high-quality lightweight aluminum. They provide seamless installation with no modifications required—and will deliver optimum cooling performance for your auto, truck, musclecar, or hot rod. The radiators are available in downflow and crossflow styles, with many size options for specific vehicles.
( 177 )
$1,506.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
