Availability
Vintage Air Gen-V Super Magnum universal climate control systems are powerful and intelligent. The Gen-V uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V Super Magnum kits include the evaporator unit and mounting brackets, a wiring harness, an electric servo heater control valve, duct hoses, a drain kit, and detailed installation instructions. Features and benefits: * Engineered to cool your vehicle faster than ever * Variable blower speed and dash/floor/defrost blend * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength, and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower with up to 20 percent more airflow
( 2 )
$1,164.99
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 10 )
$1,359.99
—
$1,470.99
Vintage Air Gen-V Magnum universal climate control systems are powerful and intelligent. The Gen-V uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V Magnum kits include the evaporator unit and mounting brackets, a wiring harness, an electric servo heater control valve, duct hoses, a drain kit, and detailed installation instructions. Features and benefits: * Engineered to cool your vehicle faster than ever * Variable blower speed and dash/floor/defrost blend * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength, and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets
Not Yet Reviewed
$1,110.99
Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.
( 234 )
$1,035.00
—
$1,648.00
Meziere 300 Series electric water pumps are the Big Daddy of electric water pumps. They're capable of flowing 55 gpm--enough for a 600 hp oval track car or a 2,200 hp Pro Mod. They have larger internal passages and heavy-duty motors and are available in radiator, remote mount, or engine mount versions. These pumps feature CNC-machined aluminum housings, epoxy coated motor windings, an RF suppression circuit, and a one-piece, carbon-ceramic seal.
( 81 )
$1,005.02
—
$1,510.60
Just need the insides? Vintage Air SureFit evaporator kits are essentially all the air conditioning system components and accessories needed for inside your vehicle. In your kit you may receive (depending on the kit) evaporator and bracket, louvers (when required), duct hose, wiring harness, new controls or cable converters, hardware, and installation manual. So, when you don't need a "complete" SureFit kit choose evaporator kits from Vintage Air.
Not Yet Reviewed
$1,099.99
—
$1,417.99
Mishimoto performance radiators are designed and engineered to maximize cooling efficiency, boost engine functions, and, most of all, protect your engine from overheating. Many stock radiators can't handle the additional heat that comes higher horsepower levels. So, swap out your stock radiator for an all-aluminum Mishimoto. Key features and benefits of Mishimoto performance radiators include: * Available for universal and exact fit applications (no cutting or modifications required) * All-aluminum construction for optimal heat dissipation, improved strength, and reliability * Increased cooling capacity due to their massive core size * 100 percent brazed aluminum core for minimal distortion, low stress, and clean joints * Available in various sizes with 2-row or 3-row cores * TIG-welded for clean, strong welds and increased durability * Magnetic drain plugs capture metallic debris or fragments * Included high-pressure 1.3 bar cap raises the coolant boiling point for greater safety and efficiency * Automatic transmission and accessory coolers included where applicable
( 331 )
$1,008.95
—
$1,612.95
Flex-A-Lite direct-fit dual electric fans were designed specifically for the cooling demands of big trucks. Vehicles equipped with these rugged fans have recorded gains in horsepower and boost in fuel economy. Other features and benefits include dual 15 in. diameter electric fans, a nylon shroud, quicker warms-ups and cool-downs, quieter operation, and a whopping 5,500 cfm maximum airflow rating. All necessary mounting hardware is included for installation.
( 15 )
$1,176.99
On Sale
Griffin Exact Fit radiator combos are the perfect pairing to take the "scary" out of electric fans! Exact Fit combos deliver Griffin's high-quality aluminum OEM fit and style radiators. They're constructed with MaxCool or ExtremeCool tubing, hand-formed aluminum shrouds, and performance electric fans. These units are easy to install, provide the best factory appearance, and fit your ride with out-of-the-box affordable performance cooling. Want to switch to electric fans? American-made Griffin Exact Fit radiator combos provide you with the perfect solution without any guesswork. Order the package designed for your specific vehicle.
( 90 )
$1,190.00
—
$1,790.00
$1,071.00
—
$1,611.00
DeWitts LSX modified radiator modules are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch. DeWitts LSX modified radiator modules are available with a standard finish, an exclusive black ice epoxy coat for a great OEM look, or polished. Over a hundred models are available (crossflow or downflow) for vehicles from the 1960s and '70s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 16 )
$1,284.99
—
$1,624.99
Mopar Replacement auxiliary coolant pumps are available for a variety of applications—including Dodge Hellcat models. These electrical water pumps are machined from aluminum for long-lasting performance. They are a consistent flowing device that circulates warm coolant into the heater core, regardless of how fast your engine is running. If too little coolant is circulated, the blower fan will pull enough heat out of the coolant and cause the heater core to get cold. Order the replacement pump recommended for your vehicle.
( 1 )
$1,087.99
DeWitts Pro-Series direct-fit radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.00 inch cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts Pro-Series direct-fit radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 39 )
$1,079.99
—
$1,589.99
DeWitts HP-Series radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.25 in. cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts HP-Series radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 15 )
$1,029.99
—
$1,609.99
Griffin Performance Fit radiators are dropping into vehicles all over the country. Why, you may ask? Constructed from an unrivaled layout of coolant tubing, these versatile radiators are truly dominating the cooling industry--not to mention, they're budget-friendly. Choose the style, location, and size needed for your application, then order one for your musclecar or off-road rig today! * Griffin Performance Fit radiators may require modifications for installation. * See Griffin Exact Fit radiators for installation with no modifications.
( 358 )
$1,028.00
—
$1,472.00
DeWitts Pro-Series direct-fit aluminum radiators provide a 25 percent increase in cooling performance. They include features like two rows of one-inch wide cooling tubes, press-formed end tanks, serpentine fins, and factory-type upper and lower channels—and they're epoxy-free! Each radiator core is assembled and brazed in a state-of-the-art aluminum brazing furnace. DeWitts Direct Fit is the company's official trademark, and it means your radiator will fit without modifications.
( 163 )
$1,009.99
—
$1,149.99
Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.
( 88 )
$1,199.99
—
$1,599.99
Does the thought of replacing your A/C evaporator give you the chills? Vintage Air Gen-IV SureFit Systems evaporator kits with fly-by-wire servo motor controls make your install totally cool! Vintage Air SureFit evaporator kits are model-specific and designed to mount to existing holes in your dash and firewall without drilling or fabrication. VA's award-winning instruction booklets walk you through to a professional installation, fitting them completely behind the dash and keeping your ride's cool looks intact! These evaporator kits include all mounting hardware, brackets, louvers, duct hose, and a wiring harness. Keep your classic cars chillin' with Gen-IV SureFit Systems evaporator kits from Vintage Air—the people who know all about cool!
( 2 )
$1,099.99
—
$1,374.99
DeWitts direct-fit radiators install in the stock mounting position and use the factory connections without any modifications or adapters. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores contain two rows of cooling tubes, a serpentine fin, and are epoxy-free. These radiators feature press-formed end tanks and are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. They are available with a standard finish or an exclusive black ice epoxy coat for a great OEM look. DeWitts direct-fit radiators can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 4 )
$1,009.99
—
$1,299.99
Griffin exact fit radiators feature an OEM-style stamped tank and are made of high-quality lightweight aluminum. They provide seamless installation with no modifications required—and will deliver optimum cooling performance for your auto, truck, musclecar, or hot rod. The radiators are available in downflow and crossflow styles, with many size options for specific vehicles.
( 177 )
$1,028.00
—
$1,506.00
Improved Racing performance oil cooler kits add massive cooling capacity under your hood. Oil temperatures in track conditions often reach as high as 300 degrees F with the factory setups. These coolers will lower peak oil temps by as much as 30 to 50 degrees F. And—the kits are not only essential for track use, but also perfectly streetable! A built-in thermostat allows engine oil to reach safe operating temperatures much faster than the factory cooling systems. Constructed from plate aluminum, the bolt-on coolers are available for a variety of applications—including Corvettes from 2005 and up.
Not Yet Reviewed
$1,199.00
Meziere high-flow mechanical water pumps may have a show quality appearance on the outside, but they're race bred inside! These high flow mechanical water pumps have already proven to be a great success in many forms of racing, including off and on-road endurance. Top end figures match the best racing pumps on the market and off idle flow is 5 to 7 GPM higher than any competitors. These high flow pumps have an all billet body construction and impeller provides tight clearances for excellent flow characteristics. Available for small block Chevy (standard and reverse rotation) and small block Fords, Meziere high flow mechanical water pumps really deliver on top end performance!
Not Yet Reviewed
$1,185.16
Classic Instruments offers engine swap radiators for a wide range of applications, including hundreds of Chevrolet and GMC trucks from the 1940s, '50s, '60s, and '70s. They're built as direct-fit stock replacements, complete with the appropriate connections. The radiators are fabricated with a high-flow copper core and one-piece brass tank, along with heavy-duty 12-gauge steel side brackets and mounting holes pre-stamped. Available in crossflow and downflow styles, a variety of size options, Classic Instruments radiators are designed for the best cooling efficiency possible. Additional details: * Simple bolt-in install with no modifications to grille or grille shell * Brass tubes made in-house * Top tanks stamped from .040 deep draw brass * Quality control start to finish, from raw material to finished product * Designed to operate with a 15-18 lb. radiator cap -- Exclusion of flathead application 7 lb. cap recommended * Brass drain cock
Not Yet Reviewed
$1,310.00
—
$1,350.00
"The cooling is in the copper." Johnson's Radiator Works engine swap radiators feature a 4-row, 2 3/4 in. thick, high-flow copper core, ideal for the best cooling efficiency possible. They are made with heavy-gauge steel side brackets and mounting holes pre-stamped where needed. Antique, vintage, or classic, Johnson's has a radiator guaranteed to cool your vehicle and engine setup. Additional features: * Copper core with one-piece brass tanks * Brass tubes made in-house--125 in. x 0.5 in. * Top tanks stamped from .040 deep draw brass * Quality control start to finish from raw material to finished product * Made with original tooling, equipment, and techniques from Walker * Designed to operate with a 15 to 18 lb. radiator cap (except Flathead application 7 lb. cap recommended) * Brass drain cock
( 2 )
$1,235.00
—
$1,600.00
AFCO Racing offers a comprehensive line of bolt-in direct fit aluminum radiators in crossflow and downflow styles. All AFCO radiators offer a furnace brazed sealed core without the use of epoxy and are all tested before shipping. Order the fitment specific to your vehicle application. Bolt-in direct-fit radiator features include: * Aluminum construction * 100 percent TIG-welded * Pressure-tested * Pre-drilled mounting holes * Filler neck and drain petcock * Two rows of 1 in. tubes for the maximum cooling available for your vehicle
( 13 )
$1,028.99
—
$1,399.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
