Availability
Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.
( 88 )
$1,199.99
—
$1,499.99
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 16 )
$1,359.99
—
$1,470.99
Just need the insides? Vintage Air SureFit evaporator kits are essentially all the air conditioning system components and accessories needed for inside your vehicle. In your kit you may receive (depending on the kit) evaporator and bracket, louvers (when required), duct hose, wiring harness, new controls or cable converters, hardware, and installation manual. So, when you don't need a "complete" SureFit kit choose evaporator kits from Vintage Air.
Not Yet Reviewed
$1,184.99
—
$1,417.99
DeWitts Pro-Series direct-fit radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.00 inch cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts Pro-Series direct-fit radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 41 )
$1,001.99
—
$1,632.99
DeWitts LSX modified radiator modules are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch. DeWitts LSX modified radiator modules are available with a standard finish, an exclusive black ice epoxy coat for a great OEM look, or polished. Over a hundred models are available (crossflow or downflow) for vehicles from the 1960s and '70s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 17 )
$1,284.99
—
$1,637.99
DeWitts HP-Series radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.25 in. cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts HP-Series radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 15 )
$1,038.99
—
$1,632.99
Griffin Exact Fit radiator combos are the perfect pairing to take the "scary" out of electric fans! Exact Fit combos deliver Griffin's high-quality aluminum OEM fit and style radiators. They're constructed with MaxCool or ExtremeCool tubing, hand-formed aluminum shrouds, and performance electric fans. These units are easy to install, provide the best factory appearance, and fit your ride with out-of-the-box affordable performance cooling. Want to switch to electric fans? American-made Griffin Exact Fit radiator combos provide you with the perfect solution without any guesswork. Order the package designed for your specific vehicle.
( 90 )
$1,069.00
—
$1,603.00
DeWitts direct-fit radiators install in the stock mounting position and use the factory connections without any modifications or adapters. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores contain two rows of cooling tubes, a serpentine fin, and are epoxy-free. These radiators feature press-formed end tanks and are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. They are available with a standard finish or an exclusive black ice epoxy coat for a great OEM look. DeWitts direct-fit radiators can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 5 )
$1,049.99
—
$1,377.99
Restore and enhance your cooling system with a Mishimoto Performance Radiator Essentials Bundle. The bundles include high-quality upgraded cooling components to replace items Mishimoto found to be the most failure-prone. Kits feature an aluminum radiator, silicone radiator hose kit, high- and low-temperature thermostats—plus other components (depending on the bundle you select). The Performance radiator features full aluminum construction with durable TIG-welded end tanks. In addition, it's designed with a massive two-row 2.2 in. thick core, which provides substantial improvements in cooling efficiency. The radiator hose kit is constructed from four layers of silicone with heat-resistant embedded fibers. This combination of materials provides substantially improved heat and pressure tolerance compared to the stock rubber hoses. In addition, the kit includes a CNC-machined aluminum quick-disconnect fitting, providing a considerable improvement in durability over the stock plastic unit. Rounding out the basic Essentials Bundle is a pair of thermostat sets; high-temperature thermostats hasten engine warmup, making it ideal for use in cold climates. The low-temperature thermostats have a lower activation temperature compared to the factory thermostat. Lower activation temperature allows coolant to flow through the engine earlier, reducing the risk of overheating in hot environments. Order the bundle with components preferred for your vehicle.
Not Yet Reviewed
$1,210.95
—
$1,494.95
DeWitts LS Modified Direct Fit Pro-Series radiators are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Over a hundred models are available (crossflow or downflow) for vehicles from the 1950s, '60s, '70s, and '80s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 4 )
$1,017.99
—
$1,627.99
AFCO Racing LS swap direct-fit radiators are built with the correct inlet and outlet required for the engine swap. They are 100 percent TIG-welded, 100 percent pressure tested and use no epoxy or sealers. These double pass radiators were designed for the rigors of racing, but AFCO added the mounts to allow their superior design on the street. After all, there are more important things to be doing than installing your radiator—like enjoying your truck the way it was intentionally built for—to be driven! AFCO Racing LS swap direct-fit radiators feature: * All aluminum construction * Billet filler neck offers strength and higher quality appearance over stamped * Uses the same tools to install your new radiator as you did to remove the old one * Factory fan shroud provisions on many models * Available with optional fan and shroud assemblies * TIG-welded by skilled craftsmen * Properly positioned inlets and outlets for ease of flow * Drain plugs included
( 3 )
$1,044.99
—
$1,453.99
Improved Racing performance oil cooler kits add massive cooling capacity under your hood. Oil temperatures in track conditions often reach as high as 300 degrees F with the factory setups. These coolers will lower peak oil temps by as much as 30 to 50 degrees F. And—the kits are not only essential for track use, but also perfectly streetable! A built-in thermostat allows engine oil to reach safe operating temperatures much faster than the factory cooling systems. Constructed from plate aluminum, the bolt-on coolers are available for a variety of applications—including Corvettes from 2005 and up.
Not Yet Reviewed
$1,199.00
Keep your vehicle running cool with aFe BladeRunner Street Series radiators. These radiators are built from aircraft grade aluminum for superior strength. A larger tube and fin core maintains cooler temperatures over a longer range of time, and the fabricated end tanks are constructed from 1/8 in. aluminum plates for strength and durability. The inlet/outlet uses billet aluminum for long-lasting reliability. aFe BladeRunner Street Series radiators include a brass drain valve and utilize the factory mounting locations for a hassle-free installation.
( 13 )
$1,128.75
DeWitts direct-fit radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. They are manufactured and furnace-brazed in the DeWitts furnace. Their epoxy-free cores feature two rows of cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch. Some models also have a built-in transmission cooler. DeWitts direct-fit radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
Not Yet Reviewed
$1,483.99
—
$1,579.99
CSF fluid coolers are part of a broad range that includes several designed, developed, and track proven in collaboration with BMW tuning specialists and parts manufacturers. Available coolers include: * Dual-pass, race-spec, DCT transmission coolers--a number are plug-and-play and include oil-line connections, mounting brackets, shrouds, and ducting * All-aluminum, controlled atmosphere brazed (CAB) dual-pass, plug-and-play, power steering coolers * Dual-pass, all-aluminum, race-spec engine oil coolers with cast end-tanks * Advanced and unique, dual-fluid, heavy-duty oil coolers with built-in fittings and included SPAL fan and sealed shroud. Additional features and benefits of CSF fluid coolers include: * Drop-in fit coolers require no modifications to install; They fit OE bumpers and accept factory oil-line connections, mounting brackets, shrouds, and ducts … even aftermarket splitters * Many feature dual-pass, high-performance cores that replace OEM single-pass designs for maximum surface area and flow * OE low-efficiency, mechanically bonded cores replaced with CAB-brazed, high-efficiency, turbulated, heavy-duty, bar and plate design cores for the most reliable and durable coolers available (on specific applications) * High-density, multi-louvered fin design with more surface area than OE units * Where applicable, fully TIG-welded end-tanks vs. OE mechanically jointed and tack-welded tanks for superior reliability and durability * Select applications include CSF's A/C condenser technology using super-high pressure, multi-channel micro-tubes * Lab tested to be more efficient than OEM coolers
( 2 )
$1,095.00
The aFe BladeRunner GT Series radiators will keep your Jeep Wrangler JK with the 3.6L engine running cooler, longer. The unique 1 3/4 in. bar and plate aluminum core design and aluminum end tanks are built to manage rock-crawling and street hauling. The BladeRunner GT Series radiator kits include upper and lower 5-ply poly reinforced silicone hoses and quality stainless steel, T-bolt clamps for a simple, secure installation. Additional details: * BladeRunner GT Series radiator features a unique 1 3/4 in. bar and plate core design for greater heat dissipation and better coolant flow for optimum cooling efficiency * 100 percent TIG-welded for race-proven strength and durability * Aircraft-grade aluminum construction and larger core offer 25 percent more coolant capacity to maintain cooler temperatures * The unique end tanks are constructed from 1/8 in. TIG-welded aluminum plates for strength and durability * Features 1 1/2 in. diameter billet aluminum inlet and outlet for long-lasting reliability * Includes a brass drain valve with a barbed fitting to connect a hose for draining coolant easily and mess free * Includes high-quality, stainless steel, T-bolt clamps, and heavy-duty 5-ply silicone hoses for strength * Both upper and lower 5-ply polyester reinforced silicone hoses can withstand elevated temperatures and outlast rubber factory hoses * Custom appearance with brushed aluminum finish with an aFe Power logo painted on the front * Radiator hoses are finished in black silicone with an aFe Power logo printed on them * Utilizes the factory mounting locations to provide stability for a hassle-free installation * Includes 1.3 Bar radiator cap
Not Yet Reviewed
$1,242.15
Power gains come at the cost of a lot of extra heat. While the factory radiator does a decent job keeping heat in check, it's always better to have more protection. CSF billet aluminum radiators offer ultimate performance cooling while being built to last a lifetime, and since the Skyline R32/R33s are valuable collector's cars, it makes sense to use the highest quality parts when restoring or modifying them. With full CNC-machined billet aluminum end tanks, TIG welded by hand to the high-grade aluminum core, these radiators perform even better than they look. Each radiator includes a 1.4 bar high-pressure cap with an embossed CSF logo.
Not Yet Reviewed
$1,095.00
Do you want cooling improvement and performance? During a test, a Be Cool aluminum radiator was installed in a 1955 Chevy in about an hour and lowered its operating temperature from 220 degrees to 180 degrees F--even with the air conditioning going full-blast. Be Cool custom-fit aluminum radiators are designed to be an exact fit, and they feature 15 percent more cooling capacity than factory 4-core models. What's more, they can be used with all brands of antifreeze and are available in both standard and polished finishes.
( 122 )
$1,149.99
Fleece Performance transmission cooler and line kits are drop-in replacements that deliver a massive 2 times increase in heat rejection and efficiency vs. stock! Control your transmission temperatures and tow with confidence with the latest improvement for your truck from Fleece Performance. Engineered from the ground up, these kits provide you with the most efficient and highest performing transmission cooler on the market, plus heavy-duty transmission lines and AN fittings for a leak-free installation. Fleece transmission cooler and line kits are the most complete options available to keep your rig running cool! Select the kit designed for your truck. Additional features: * Drop-in replacement for the factory transmission cooler * No cutting or splicing of OE lines * 20 percent increase in face area of the transmission cooler vs. stock * 100 percent pressure and leak tested
Not Yet Reviewed
$1,479.00
DeWitts Pro-Series direct-fit aluminum radiators provide a 25 percent increase in cooling performance. They include features like two rows of one-inch wide cooling tubes, press-formed end tanks, serpentine fins, and factory-type upper and lower channels—and they're epoxy-free! Each radiator core is assembled and brazed in a state-of-the-art aluminum brazing furnace. DeWitts Direct Fit is the company's official trademark, and it means your radiator will fit without modifications.
( 166 )
$1,006.99
—
$1,218.99
DeWitts' restoration copper and brass radiators are built with the same technology and precision that define their direct-fit aluminum radiators. These reproductions include the "Harrison" embossment and factory-type channels, just like the original equipment. So if you're restoring a classic sports car or are interested in running your engine at cooler temps, order the DeWitts replacement radiator model designed to fit.
Not Yet Reviewed
$1,589.99
Scott Drake underhood compressor conversion kits maximize AC performance, increase engine horsepower, and improve gas mileage. These kits include the popular Sanden-style compressor and bracket, a Super-Kool condenser with a factory-style drier, new AC hoses, and a compressor safety switch.
( 5 )
$1,049.95
DeWitts HP-Series direct-fit aluminum radiators provide maximum cooling for high performance vehicles. They include features like two rows of 1.25 in. wide cooling tubes, press-formed end tanks, serpentine fins, and factory-type upper and lower channels—plus, they're epoxy-free! Each radiator core is assembled and brazed in a state-of-the-art aluminum brazing furnace. DeWitts Direct Fit is the company's official trademark, and it means your radiator will fit without modifications.
( 16 )
$1,006.99
—
$1,632.99
Clearance
GMB OE replacement water pumps are precision-built and balanced to meet or exceed original equipment specifications. They're assembled with heavy-duty steel bearings—and are lubricated and sealed for life. Order the model designed for your vehicle application. All GMB water pumps are factory-tested for quality and include the following features: * High-flow design for long-lasting, efficient cooling * Designed for OE fit and performance * Precision-ground shaft and hub accept OE fan clutches perfectly * OE-quality forged housing is specially formed to ensure maximum coolant flow * Pressed-on impeller increases water flow * Unique no-sealant-required gasket makes installation fast and easy * Unitized seal protects bearings for long life and leak-free performance * Factory-sealed, precision-ground, one-piece bearing assembly
( 532 )
$1,464.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
